Bids Are invited for Ultrasonic Gastrovideoscope - Should Have An Electronic Curved Linear Array Transducer With High Resolution Ccd Which Delivers Higher Quality Ultrasound Image With Greater Imaging Depth. , Should Offer Flexibility From Straighfor

Sharing tender

Bids Are invited for Ultrasonic Gastrovideoscope - Should Have An Electronic Curved Linear Array Transducer With High Resolution Ccd Which Delivers Higher Quality Ultrasound Image With Greater Imaging Depth. , Should Offer Flexibility From Straighforward Tissue S Ling To Sophisticated Eus Guided Treatment. , Scanning Range Should Be 180° Or More. , Should Have Lens Cleaning Function For Keeping The Endoscopic Field Of View Clear All The Times. , Angulation Should Be Up- 130°/Down-90°, Left-90°/Right- 90° Or More. , Should Have Eus Images With Selectable Frequencies From 5 To 12 Mhz. , Should Operate For B Mode, Color Doppler Mode And Power Doppler Mode For Effective Confirmation Of Blood Flow. , Field Of View Should Be 100 Degree Or More. , Depth Of Field Should Be 3 To 100 Mm Or More. , Direction Of View Should Be Forward Oblique Viewing 55° Or More. , Insertion Tube Outer Diameter - 12.6 Mm Or Less. , Distal End Outer Diameter - 14.6 Mm Or Less. , Instrument Channel Diameter - 3.7 Mm Or More. , Videoscope Should Have Fna (Therapeutic) Capability. , Eus Scope Should Be Fully Immersible For Thorough Cleaning. , Balloon Inflation & Deflation Must Be Controlled From Air/Water & Suction Button. , Should Be Compatible With Existing Endoscopy Processor- Cv 1500, Cv 190 As Well As Ultrasound Processor- Eu Me3, Eu Me2. , Should Provide Dvi,Hd-Sdi Connecting Cables, -1 Each. , Ultrasound Cable (Cat No.Maj 2056) Should Be Provided Along With The Scope To Ensure Excellent Platform Compatibility. , Should Provide Connecting Cable Kit (Cat No. Maj 2477) For Connecting Existing Cv-1500,Cv-190 Processor. , Should Be Provide Co2 Bottle Container (Cat No. Maj 902) For Connecting Existing Cv-1500,Cv-190 Processor -2Nos , Should Provide Video Scope Cable (Cat No. Maj1430) Qty-01 For Connecting 180 Series Scope To Cv190 & Cv1500 Video Processor. , Should Be Supplied With All The Standard Accessories Such As Mouth Piece, Channel Plug, Injection Tube, Balloon, Channel Cleaning Brush, Balloon Applicator, Suction Cleaning Adaptor, Cleaning Adaptor For Instrument Channel, Water Resistant Cap For Both Ends Of Processor End, Eus Scope Suction Valve,Eus Scope Air Water Valve,Biopsy Valve. , Should Be Supplied With Additional Accessories Such As , Should Perform Preventive Maintenance (2Nos) During Warranty,Amc,Cmc & If Entered Into Amc(Includes Unlimited Breakdown Calls) /Cmc (Which Will Include Spare Replacement, Breakdown Calls). Vendor To Submit Sops For Pms At The Time Of Installation/ Commissioning. This Is Mandatory Requirement. , Performance Certificates Of Iq,Oq,Pq Tests To Be Submitted At The Time Of Installation/Commissioning. , Vendor To Submit The Technical Data Sheet, Brochure Etc As A Tender Document With Reference To The Quoted Make & Model. Please Mention The Reference Page No., Quoted Model Name/Number Against Each Item Etc In These Documents Against Each Technical Specifications In The Compliance. , Vendor To Submit List Of Consumables/Consumable Spares And Spare Parts( I.E.Spares Need To Be Replaced At Regular Intervals, Maybe Quarterly/Half Yearly/Yearly Etc.) If Any.Cost Of Consumables To Be Added In The Financial Bid Not In The Technical Bid. , Vendor To Submit Details Of Footprint Size & Weight Of The Quoted Model. , Vendor To Submit Power Consumption. , Demo Of The Quoted Model , Will Be Required If So Desired By The User, After The Opening Of The Technical Bid And Prior To Opening Of Financial Bid. This Is For Technical Evaluation. All Technical Specifications Mentioned Above To Be Mandatorily Shown In The Demo Unit. , Users/Installation List: A List Of Installations Of The Quoted Model With The Address And Contact Numbers To Be Provided. , Predispatch Inspection At Factory Will Be Required If Desired By Authorities. , Should Be Ce/Us Fda/Bis/Icmed Approved. , Vendor Should Provide The User Manual And Service Manual Copy During The Installation Of The Equipment. , Unpacking And Shifting The Consignment To The Installation Site Is To Be Included In The Vendors Scope Of Supply. Bidder/Manufacturer/Authorized Service Provider Should Take Responsibility To Lift /Shift The Consignment From Unloading Site To The Installation Site. Unloading Site Shall Be Stores Department, Tmh Parel. If Needed ,Bidder Has To Arrange For The Labours At No Charge To Tmh Parel. (Before Submitting The Quotation,Bidders May Visit Tmh Parel. To Know Unloading And Installation Site. , Training: , Local Service Support: Should Have Local Office And Service Support/Service Engineer For Attending The Breakdown Calls. Details To Be Submitted. , Response Time: Should Not Be More Than 06 Hrs From Lodging A Breakdown Complaint On Toll Free Or By Email. , Warranty- 2 Years , Cmc- For 8 Years Per Annum After Warranty , Include 2 Preventive Maintenance/ Year And All Breakdown Visits. All Bought Out Items Used In System Should Also Be Included In The Warranty & Cmc. Warranty & Cmc Should Include Upgrades / Update Cost, No Separate Software Licence Fees Will Be Payable. Standby Scope To Be Provided Against Defective Scope. , Please Note : Warranty & Cmc Should Cover Unlimited Breakdowns,Free Spare Replacements, Patinet Bites, Any Type Leakage In The Flexible Scope , Glass Part Breakages , Ccd Damage And Other Regular Problems Observed Such As Flickring,Angulation, Etc. , Loaner Should Be Provided During Warranty And Cmc. , Back To Back Assurance To Be Taken By The Supplier From Oem To Supply Spares For Minimum 10 Years And To Be Submitted. , If 2 Years Warranty, Cmc Per Annum For 8 Years After Warranty And Buyback If Any Wherever Applicable Are Not Adhered To, Tmc Reserves Right To Reject The Offer. , Please Mention Whether Ups Is Required For The Equipment. If So Should Be Included In The Offer. , Only Yes Or No Should Be Mentioned In Compliance Report And Additional Information In Remarks Column. , Please Provide List Of The Consumables/Spares/Reagents/Control/Calibrators (If Any) In Technical Documents And Cost Of The Same Should Be Uploaded In Pdf File In The Financial Documents. , Do Not Mention / Upload Price And Cost In The Technical Documents Otherwise Your Quotation Will Be Disqualified At Technical Stage.