Tender For Repairing Of Pump House And Electrical Connection To Motor And Internal Wiring Of Pump-House At Kalighat-Ii Major R.L.I Scheme Under Goalpokher-Ii Block Under Isl Ur (Agri-Electrical) Sub-Division Under Raiganj (Agri-Mechanical) Division.
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
1 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Uttar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Pump House And Electrical Connection To Motor And Internal Wiring Of Pump-House At Kalighat-Ii Major R.L.I Scheme Under Goalpokher-Ii Block Under Isl Ur (Agri-Electrical) Sub-Division Under Raiganj (Agri-Mechanical) Division.
BOQ
| Sl. No. | Item Description |
| 1 | Pump House |
| 2 | Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of theexcavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS 6313 (part -II) 1981. (Mode of measurment will bethe plan area of foundation treated.) |
| 3 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed |
| 4 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 5 | 125 mm.thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 6 | Dismantling artificial stone flooring upto 50 mm.thick by carefully chiselling without damaging thebase and removing rubbish as directed within alead of 75 m |
| 7 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @1.75kg/sq.m all complete including all materials and labour. |
| 8 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 mm as directed. |
| 9 | OrdinaryCement concrete (mix 1:2:4) with graded stone chips (20mm nominal size)excludingshutteringandreinforcement,ifany, ingroundfloor as per relevant IS codes (i) Pakur Variety |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster |
| 11 | 1.15 (ii) With 1:6 cement mortar (c) 20 mm thick plaster |
| 12 | 1.15 (iiI) With 1:4 cement mortar (c) 10 mm thick plaster |
| 13 | Neat cement punning about 1.5 mm.thick in wall dado, floor, drain, door and window sill etc. complete. |
| 14 | White washing ( 3 coats ) including cleaning and smoothening surface thoroughly (5 parts of stone lime and 1 part of shell lime should be used in finishing coat) |
| 15 | Colour washing with \\"ELLA\\" with a coat of white wash priming including cleaning and smoothening surface thoroughly : |
| 16 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(DC Priming) (For MS Gate) |
| 17 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface sand paper etc. incluyding using of approved putty etc. on the surface, if necesaary On steel or other metal surface:With other than hi-gloss of approved quality.Two coats (with any shade except white)((For MS Gate) |
| 18 | Taking out shutter of door andwindow, dismantlingby parts (for repair orreplacement of damaged parts),reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item,payment under item73will be made once only).Door frame |
| 19 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc.including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.Window Frame |
| 20 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or bothfaces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost ofall labour and materials. |
| 21 | Taking out old iron higes and fitting, fixing the same with new steel screws.e) 150mm. Long butt hinge For Door |
| 22 | Taking out old iron higes and fitting, fixing the same with new steel screws. c) 75mm. Long butt hinge For Widow |
| 23 | i) Ironhaspbolt of approvedquality fittedand fixedcomplete (oxidised)with16mm dia rod with centre bolt and round fitting. |
| 24 | Sub Total = [Sum of item 1.01 to 1.23] |
| 25 | Add GST @18% |
| 26 | Add Labour welfare cess @1% |
| 27 | Total for Pump House |
| 28 | INTERNAL WIRING FOR PUMP HOUSE : Supply with fitting & fixing of fabricated wooden pannel board of size 6ft x 4ft x1inch with M.S. clamp on the wall of pump house/kiosk box in barge including jumming 2'-1'' long 4 nos. angle made of 50mmx50mmx6mm M.S.angle welded with the panel board for jamming in the wall by cement concrete (4:2:1) necessary arrangements will be made by the contractor at his own cost for fitting fixing the following electrical equipmments /materials in to the pannel board including 2 coats of painting of synthetic enemal paints of approved quality over one coat of primar including smoothening surface as per direction of E-I-C |
| 29 | Supplying, fitting & fixing of 32 Amps / 63 Amps / 100 Amps / 415V rewireable type porcelain body Fuse top & base complete set confirming to IS: 13947/ Part-4/Sec-I/1993 over wooden plank/ board on wall and making necessary connection with the electrical cables as per direction of E.I.C.i) 100 Amps. |
| 30 | Supplying and fixing of Sheet steel Main Switches on flat iron frame on wall. A)16amps Havells make |
| 31 | Wiring in 1.1 KV grade single core stranded 'FR' PVCinsulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precisionmake) incl. necy. PVC clips, fittings etc.i)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) (from cut out to 16 Amp Main Switch) |
| 32 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5Amp 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/ perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to originalfinish [PVC casing capping and Switch board both on surface](i) Avg Run 7.5 meter. |
| 33 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. |
| 34 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. |
| 35 | Fixing only of 100 A, 415 V sheet steel TPN main switch on Angle iron Frame on wall. |
| 36 | Fixing only of 63 A, 415 V sheet steel TPN main switch on Angle iron Frame on wall. |
| 37 | Fixing only of 100 A, 415 V sheet steel Busbar Chamber (4 bars) on Angle iron Frame on wall. |
| 38 | Fixing only 20 HP Motor controller comprising of Oil immersed / Air break starters on Angle iron frame on wall |
| 39 | Meter loop connection with 1.1KV Gr. 3.5core/4core 10sqmm to 50mm PVC/XLPE insulated & sheated and armoured Aluminium/Copper Cable from Meter to incoming TPN Main Switch/ Terminal (Brand: Gloster/Havells/Finolex) |
| 40 | Supplying and Drawing with 1.1 KV, PVC flexible 'FR' cables copper conductor conforming to IS 694 in suitable size with fitting and fixing on wall/Kiosk Box , including making necessary connection to the pre-fixed devices with all necessary accessories like saddle, screw, clips, gland, socketetc. conforming to IEE regulation and as per direction of EIC. (Brand: Gloster/Havells/Finolex)[a] For Major RLI i)4Cx 25 sqmm Copper cable conforming to IS 694 [ Cut out to 100 A Main Switch and 100 A TPN Main switch to Bus-bar] |
| 41 | Supplying and Drawing with 1.1 KV, PVC flexible 'FR' cables copper conductor conforming to IS 694 in suitable size with fitting and fixing on wall/Kiosk Box , including making necessary connection to the pre-fixed devices with all necessary accessories like saddle, screw, clips, gland, socketetc. conforming to IEE regulation and as per direction of EIC. (Brand: Gloster/Havells/Finolex)[a] For Major RLI i)3Cx 16 sqmm Copper cable conforming to IS 694 [ Cut out to 63 A Main Switch and 63 A TPN Main switch to Bus-bar] |
| 42 | Supplying and Drawing with 1.1 KV, PVC flexible 'FR' cables copper conductor conforming to IS 694 in suitable size with fitting and fixing on wall/Kiosk Box , including making necessary connection to the pre-fixed devices with all necessary accessories like saddle, screw, clips, gland, socketetc. conforming to IEE regulation and as per direction of EIC. (Brand: Gloster/Havells/Finolex)[a] For Major RLIi) 2 X 3C X 10 sqmm copper cable conforming to IS 694 (Motor Controller to Motor) |
| 43 | Supplying & fixing of EI Danger board (20 cm. x 30 cm. )in four distinguishing position . As per IEE regulation. |
| 44 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium G.I. Pipe. |
| 45 | Supplying and fixing earth bar of galvanized (hot dip) M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilled holes on busbar complete with G.I. bolts, nuts, washers spacing insulators etc. as required for tapping. |
| 46 | Connecting the equipments to earth busbar including supplying and fixing G.I. (hot dip) Wire on wall/floor with stapples burried inside floor/wall as required and making connection to equipments with bolts, nuts, washers, cable, lugs etc. as required and mending good all the damages.By Solid 8 S.W.G. GI Wire. |
| 47 | Insulation testing of internal wiring of Pump House/Kiosk Boxincluding wiring of electric Motor & other ancilary equipments by means of Megger. |
| 48 | Placing and positioning the Centrifugal pump motor set on the pump base/pump house floor, alligning properly with necessary packing and fixing the set with holding down nuts and washer including cutting holes of requisite size in the floor / base, grouting the bolts and mending good all damages- complete as per direction of Engineer-in-Charge. |
| 49 | Extra rate add @ 7 % on every items excluding item nos. 1,2,12,13,14,15,20,21 (for Uttar Dinajpur District) |
| 50 | Sub Total = [Sum of item 1.27 to 1.48] |
| 51 | Add GST @18% |
| 52 | Add Labour welfare cess @1% |
| 53 | Total for Internal Wiring Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender