Tender For Completion Of The Balance Works Of Type-C Quarter (C1-16 Units) At Nit Meghalaya Permanent C Us, Saitsohpen, Sohra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
15 days left
EMD
8.31 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of The Balance Works Of Type-C Quarter (C1-16 Units) At Nit Meghalaya Permanent C Us, Saitsohpen, Sohra
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. Hard rock (blasting prohibited) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 4 | Providing and laying light weight foam concrete in sunken portion at all levels. Density of the concete shall be 400-450 Kg/Cum using OPC as binder, litho foam as network former, litho foam SL 200L as forming agent and fiber, all complete as per manufacturer's specification and direction of Engineer-in-charge |
| 5 | Centring and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete. |
| 6 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 7 | Suspended floors, roofs, landings, balconies and access platform. |
| 8 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Above PlinthThermo-Mechanically Treated bars. |
| 9 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All work From Plinth Level & upto floor V level. |
| 11 | Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work. |
| 12 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab over 0.50 sqm. |
| 13 | Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work. |
| 14 | Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. |
| 15 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 17 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) |
| 18 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 19 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 20 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete |
| 21 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete250x16 mm |
| 22 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 300x10 mm |
| 23 | 200x10 mm |
| 24 | 100x10 mm |
| 25 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125 mm |
| 26 | 100 mm |
| 27 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper |
| 28 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality.1.0 mm thick. |
| 29 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge |
| 30 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 31 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 32 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 33 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Light shade using white cement. |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 60x60 cm |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 60x60 cm |
| 38 | Providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-chargeFlamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent |
| 39 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) |
| 40 | 6 mm cement plaster of mix 1:3 (1 cement: 3 fine sand) |
| 41 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. |
| 42 | Providing & Fixing Chicken Mesh of apreacher 25mm with 22 SWG Wire on the junction of R.C.C work & brick work under the plaster by U nail. Complete as per direction of Engineer in charge. |
| 43 | Providing & fixing SS wire gauge of average width of aperture 1.4 mm with wire of dia 0.63 mm for aluminium doors/window fixed with nessecary screw / washer complete in all respects as per direction of Engineer-In- Charge. |
| 44 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Per bag of 50 kg cement used in the mix |
| 45 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 46 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeNew work (Two or more coats applied @ 1.43 ltr/ 10 sum. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sum). |
| 47 | Applying priming coat with primer of approved brand and manufacture having low VOC content with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litret |
| 48 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 49 | Semi-unitized Glazing (design, fabrication and installation)(a) Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:Structural analysis & design and preparation of shop drawings for thespecified design loads conforming to IS 875 part III (the system mustpassed the proof test at 1.5 times design wind pressure without anyfailure), including functional design of the aluminum sections for fixingglazing panels of various thicknesses, aluminium cleats, sleeves andsplice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness,pressure equalisation & drainage and protection against fire hazardincluding:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminiumalloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticalityand fixing structural glazing system rigidly to the RCC/ masonry/structuralsteel framework of building structure using stainless steel anchorfasteners/ bolts, nylon seperator to prevent bimetallic contacts with nutsand washers etc. of stainless steel grade 316, of the required capacityand in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealantand one part weather silicone sealant compatible with the structuralsilicone sealant of required bite size in a clean and controlled factory /work shop environment, including double sided spacer tape, settingblocks and backer rod, all of approved grade, brand and manufacture, asper the approved sealant design, within and all around the perimeter forholding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1mm thick and of sizes, shapes and profiles, as required as per the siteconditions, to seal the gap between the building structure and all itsinterfaces with curtain glazing to make it watertight(e) Making provision for drainage of moisture/ water that enters thecurtain glazing system to make it watertight, by incorporating principlesof pressure equalization, providing suitable gutter profiles at bottom (ifrequired), making necessary holes of required sizes and of requirednumbers etc. complete. This item includes cost of all inputs of designing,labour for fabricating and installation of aluminium grid, installation ofglazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes orcradles etc. as described above and as specified.The item includes the cost of getting all the structural and functionaldesign including shop drawings checked by a structural designer, dullyapproved by Engineer-in-charge. The item also includes the cost of allmock ups at site, cost of all samples of the individual components fortesting in an approved laboratory, field tests on the assembled workingstructural glazing as specified, cleaning and protection till the handingover of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristicsetc. all complete as required, as per the Architectural drawings, as peritem description, as specified, as per the approved shop drawings and asdirected by the Engineer- in-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadowboxes, extruded aluminium section capping for fixing in the grooves ofthe curtain glazing and vermin proof stainless steel wire mesh shall bepaid for separately under relevant items under this sub- head. However,for the purpose of payment, only the actual area of structural glazing(including width of grooves) on the external face shall be measured insqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structuralglazing system if area of structural glazing exceeds 2500 Sqm from thecertified laboratories accreditated by NABL(National Accreditation Boardfor Testing and Calibration Laboratories), Department of Science &Technologies, India. Cost of testing is payable separately.The NIT approving authority will decide the necessity of testing on thebasis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing system Tests to be conducted inthe NABL accredited lab or any other accreditation body which operates inaccordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 170251. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) &(+50pa to +300pa) as per ASTM E-283-04 testing method for a range oftesting limit 1 to 200 mVhr2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09testing method for a range up to 2000 ml.3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05testing method for a range upto 2000 ml4. Structural Performance Deflection and deformation by static airpressure test (1.5 times design wind pressure without any failure) as perASTME-330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testingmethod for Qualitative test, Tests to be conducted on site.6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa(35psi) upto 2000 ml |
| 50 | Providing, assembling and supplying vision glass panels (IGUs)comprising of hermetically-sealed 6-12- 6 mm insulated glass (doubleglazed) vision panel units of size and shape as required and specified,comprising of an outer heat strengthened float glass 6 mm thick, ofapproved colour and shade with reflective soft coating on surface # 2 ofapproved colour and shade, an inner Heat strengthned clear float glass6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item above)For payment, only the actual area of glass on face # 1 of the glass panels(excluding the areas of the grooves and weather silicone sealant) providedand fixed in position, shall be measured in sqm.(i) Coloured tinted float glass 6 mm thick substrate with reflective softcoating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clearGlass of approved make having properties as visible Light transmittance(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflectionexternal 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement |
| 51 | Extra for openable side / top hung vision glass panels (IGUs) includingproviding and supplying at site all accessories and hardwares for theopenable panels as specified and of the approved make such as heavyduty stainless steel friction hinges, min 4 -point cremone locking sets withstainless steel plates, handles, buffers etc. including necessary stainlesssteel screws/ fasteners, nuts, bolts, washers etc. all complete as per theArchitectural drawings, as per the approved shop drawings, as specifiedand as directed by the Engineer- in-Charge. |
| 52 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately)For fixed portion.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 53 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 54 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 5.50 mm thickness |
| 55 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With brass cover plate minimum 1.25 mm thickness |
| 56 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 57 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 58 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying a) First layer of slurry of cement @ 0.488 kg/sum mixed with water proofing cement compound @ 0.253 kg/sum. This layer will be allowed to air cure for 4 hours.b) Second layer of slurry of cement @ 0.242 kg/sum mixed with water proofing cement compound @ 0.126 kg/sum. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 59 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 60 | Providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one steps cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the wall etc20 mm nominal dia pipes |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with onestep CPVC solvent cement, trenching, refilling & testing of joints completeas per direction of Engineer in Charge.25 mm nominal dia pipes |
| 62 | 65 mm nominal dia Pipes |
| 63 | 100 mm nominal dia Pipes |
| 64 | 150 mm nominal dia Pipes |
| 65 | Providing and fixing brass bib cock of approved quality20mm nominal bore |
| 66 | Providing and fixing uplasticised PVC connection pipe with brass unions30 cm length20mm nominal bore |
| 67 | Providing and fixing C.P brass shower rose with 15 or 20 mm inlet120 mm diameter |
| 68 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings 7 C.I brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling and approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors whereever requiredW.C. pan with ISI marked white solid plastic seat and lid |
| 69 | Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting painting of fittings and brackets, cutting and making good walls wherever requireWhite vitreous china wash basin size 550x400 mm with a pair of 15mm C.P brass pillar taps |
| 70 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever requiredKitchen sink with drain board510x1040mm bowl depth 250 mm |
| 71 | Providing and fixing PVC waste pipe for sink or wash basin including pvc waste fittings completeFlexible pipe32 mm dia |
| 72 | Providing and fixing 100 mm sand cast iron grating for gully trap |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete |
| 74 | Providing and fixing toilet paper holderC.P brass |
| 75 | Providing and fixing soil, waste and vent pipes100mm diaSand cast iron S&S pipe as per IS:1729 |
| 76 | Providing and fixing plain bend of required degree100mm diaSand cast iron S&S as per IS - 1729 |
| 77 | Providing and fixing CP brass single lever telephonic wall mixer of quality & make as approved by engineer in charge15mm nominal dia |
| 78 | Providing and fixing PTMT liquid soap container 109mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 79 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 rms |
| 80 | Providing and fixing 8mm dia CP/SS jet with flexible tube upto 1 metre long with SS triangular plate to european type WC of quality and make as approved by engineer-in-charge |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 82 | Concealed Wiring in looping system with 2x1.5 sqmm PVC insulated single core copper cable of 600 V grade in heavy gauge PVC Pipe including occuping and fitting of elbows, bend, Tees, Junction boxes, ceiling rose etc including required size/capacity MS concealed boxes ,front plate , switches, sockets, fan regulator, bell push etc complete to light point. Long Point wiring upto 10 meter |
| 83 | Medium Point wiring upto 6 meter |
| 84 | Short Point wiring upto 3 meter |
| 85 | Concealed Wiring in looping system with 2x1.5 sqmm PVC insulated single core copper cable of 600 V grade in heavy gauge PVC Pipe including occuping and fitting of elbows, bend, Tees, Junction boxes etc including required size/ capacity MS concealed boxes ,front plate , 6Amp switches, sockets, etc complete to a light plug point when fixed elsewhere with continuous earth wire complete. Long Point wiring upto 10 meter |
| 86 | Medium Point wiring upto 6 meter |
| 87 | Short Point wiring upto 3 meter |
| 88 | Concealed Wiring in looping system with 2x4 sqmm PVC insulated single core copper cable of 600 V grade in heavy gauge PVC Pipe including occuping and fitting of elbows, bend, Tees, Junction boxes etc including required size MS concealed boxes ,front plate , 16 A switches, sockets, etc complete to a Power plug point with continuous earth wire complete. Long Point wiring upto 10 meter |
| 89 | Medium Point wiring upto 6 meter |
| 90 | Short Point wiring upto 3 meter |
| 91 | Concealed Wiring in looping system with 2x1.5 sqmm PVC insulated single core copper cable of 600 V grade in heavy gauge PVC Pipe including occuping and fitting of elbows, bend, Tees, Junction boxes, ceiling rose etc including required size/capacity MS concealed boxes ,front plate , switches, fan regulator etc complete to a Ceiling/ Exhaust Fan point. Long Point wiring upto 10 meter |
| 92 | Medium Point wiring upto 6 meter |
| 93 | Short Point wiring upto 3 meter |
| 94 | Concealed Wiring in looping system with 2x1.5 sqmm PVC insulated single core copper cable of 600 V grade in heavy gauge PVC Pipe including occuping and fitting of elbows, bend, Tees, Junction boxes, ceiling rose etc including required size/capacity MS concealed boxes ,front plate , bell push etc complete to calling bell/ bell indicator point. Long Point wiring upto 10 meter |
| 95 | Supplying and drawing of the following size of PVC insulated copper wire, Surface/ Concealed in the existing surface/Concealed PVC / Steel Conduit.2x1.5 sqmm PVC Copper Wire |
| 96 | 2x4 sqmm PVC Copper wire |
| 97 | Concealed Wiring, drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 volt grade copper conductor using heavy gauge PVC rigid pipe complete with all accessories with 2X6 sqmm copper conductor |
| 98 | with 2X16 sqmm copper conductor |
| 99 | Supplying and drawing of the following size of PVC insulated copper wire, Surface/ Concealed in the existing surface/Concealed PVC / Steel Conduit.3x2.5 sqmm PVC Copper Wire |
| 100 | Supplying fitting & fixing of copper coated Chemical Earthing electrode filled with CCM and Black fill compound (BFC)Diameter:50mm length: 2 meter |
| 101 | Supplying and laying of 15mmx5mm GI / Copper Strip at 0.5 mts below ground.with 25mmx6mm GI strip |
| 102 | Supplying fitting and fixing of copper lightning arrestor with 5 nos finger at the top and copper base plate at the bottom complete.With 3ft high copper rod. |
| 103 | Supplying fixing connecting testing and commissioning of calling bell/ bell indicator type suitable for 230V as well as battery operated complete with all accessories.Dingdong Bell/ b) Bird Bell |
| 104 | Supplying and fitting of ceiling fan AC operated type 220/250 volt.Complete with 3 Nos of blades down rod canopy hanning shackle & 30mm length of down rod supplied with the fan by the dealer but the extra length will be [email protected]/mrts.AC ceiling fan '1200' mm sweeps |
| 105 | Supplying fitting and fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all accessories.Bulb5 watt |
| 106 | Candle LED Bulb5W |
| 107 | Supplying fitting and fixing of LED Batten surface or wall mounted with all necessary accessoriesa) With poly carbonate housing & integrated electronic driver 20 watt |
| 108 | Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A.Single Pole 240/410 V6-32 Amp |
| 109 | Supplying, fitting and fixing of DX3 Isolators for AC application upto 125 ADouble pole 240 V63 Amp |
| 110 | Supplying fitting and fixing of Distribution Board SPN DB,s for MCB, Isolator, RCCB and RCBO.IP 30 -#1K08 16way+16Module |
| 111 | Supplying fitting and fixing of water heater (Geyser) of 1.5KW/ 3KW with pressure release valve including all necessary accessories as required.15 litres capacity |
| 112 | Supplying fitting and fixing of exhaust fan double bearing self lunricating type single phase 50 Hz 250V AC operated with supporting frame fan blades nuts and bolts and pretty accessories as reuired.Domestic Exhaust Fan250 mm |
| 113 | Design, fabrication, supply installation testing and commissioning of cubical type Compartmentalised pedestal/ floor mounted power supply panel board of approved size and 450mm deep made out of 2mm thick CRCA sheet steel with suitable size compartments, Al Bus bars, switchgears, voltmeters, ammeters ith selector switches etc including powder powder coating painting with accessories hardwares etc required for completeness and as per arrached specification direction of Engineer and electrical inspectorate standardThe panel board shall house.1 no 4 pole 300A MCCB, 45 KA normal supply incomer1 set 4 pole 300 A Al Busbar3 nos Current Transformer of 200/5A1 no Ammeter with selector switch1 no. 0-500V voltmeter with selector switch3 nos LEDs for each MCCB incomer16 nos 40-63 A DP MCB, 25 KA as outgoing |
| 114 | Supplying fitting and fixing of 440 Volt grade FP Change Over Main Switch (Best Quality)1 no. 320 A, 440 V grade, 4 Pole Change Over Switch Incommer |
| 115 | Supplying fitting and fixing of Moulded Case Circuit Breaker (MCCBs) of the following Amp Capacity.With breaking Capacity of 45 KA Four Poles 300 Amp |
| 116 | Supplying fitting fixing of single phase energy meter of 230V/250V grade of 2.5-5,5-10,10-20,20-40 Amp Capacity. |
| 117 | Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A.Double Pole 240/410 V40-63 Amp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender