Tender For Provn Of Certain Sanctioned Minor Works And Revenue Works In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
Tender Value
43.48 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
9 days left
EMD
86960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanctioned Minor Works And Revenue Works In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Aug-2026 | Revised BOQ | BOQ | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed. |
| 3 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Filling under floor, spreading and levelling in layers n exc 25cm thick well raming including watering as requred complete all as specified and directed |
| 5 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 6 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and as directed. |
| 7 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed . |
| 8 | M&L for RCC M25 design mix, using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 9 | M&L for brick work with sub class 'B' old size bricks in CM 1:6, straight or curved on plan exc 6 m mean radius complete all as spd & directed. |
| 10 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 11 | Ditto as per Item No 10 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 12 | M&L for 15mm thick cement plaster on brick or concrete surface in CM 1:4 finished even and smooth surface using extra cement complete all as specified and as directed. |
| 13 | M&L for applying Two or more coats of 100% Premium Acrylic Emulsion paint having VOC less than 50gm/ltr and UV resistant as per IS 15489:2004,Alkali &fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/10Sqm over and incl priming coat of exterior primer applied @0.90 ltr/10 sqm over new surface with including 1mm thick wall care putty complete all as specified and directed |
| 14 | M&L for Glazed ceramic coloured tiles in vertical surface,450x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles in patch work repair including 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed. |
| 15 | M&L for joint free non skid colour ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.16 sqm, in floors etc, in patch work repair, set jointed in neat cement slurry & pointed in coloured cement to match and including 15 mm thick screed bed in CM (1:4) including dismantling old tiles with backing complete all as spd and directed. |
| 16 | M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed. |
| 17 | S&F for 1000 ltr capacity rotational moulded polyethylene three layered water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position complete all as spd and directed. |
| 18 | S&F Gate valve 25 mm fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for GI pipe complete all as specified and as directed.. |
| 19 | S&F 25mm float ball valve high pressure of PTMT with epoxy coted aluminium rod & high density plastic bal serewed for ison pipe complete all as specified and as directed. |
| 20 | M&L for Bib tap fancy type, chromium plated for 25mm bore of pipe, cast copper alloy with crutch or butter fly handle, screwed for iron pipe complete. complete all as specified and as directed. |
| 21 | M&L for stop vale/gate vave cast copper alloy chroumium plated fancy type for 15mm bore dia of pipe complete all as specified and as directed. |
| 22 | M&L for 75mm out let diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 23 | S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and as directed. |
| 24 | S&F 110mm bore PVC (SWR) bends any radius all as specified and direction. complete all as specified and as directed. |
| 25 | Excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in Soft / loose soil all as specified & directed by Engr-in-Charge. |
| 26 | M&L plain cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 27 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint (including preparation of surface) complete all as specified & directed by Engr-in-Charge. |
| 28 | S&F mild steel framed work in doors frames ,tank staging or support of granite slab of angle or other section with rail, braces, holdfast, etc complete incl fixing of hinges and fixing in position including complete all as specified and directed. |
| 29 | S&F Pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour haing tensile strerngth of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for preparation of new steel & iron surfaces, eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of syntethic enamel paint complete all as specified & directed by Engr-in-Charge. |
| 31 | Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in soft/loose soil and removing debrish beyond MOD land complete all as specified and directed. |
| 32 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 33 | M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 34 | M&L for Pre polished machine pressed Chequred cement concrete tiles glossy finish 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm screed bed in cm 1:6 complete all as specified and directed. |
| 35 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed. |
| 36 | M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 37 | M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 38 | S&F 5.5mm thick frosted glass, selected quality and fixed to aluminium joinery in square n exc 0.5 sq. m in each pane complete all as spd & directed. |
| 39 | Providing, fitting & fixing 12mm thick Toughened glass full height DOUBLE SLIDING DOOR with AUTOMATIC SENSOR MOTOR with locking system, 4.15 mtr full system and arrows pointing inward towards the preferred entry (2 Fixed & 2 sliding panels - approx. 8.50 sqm (plus/minus 0.50 Sqm), and combination of stainless steel patch fittings, soft nose seal 12mm, along with 12mm thk Toughened glass full height Fixed Partitioning system combination of stainless steel fitting like Wall to glass clamping patch , Top, Bottom & Side patch fittings. (Reference model :Dorma ES 200 easy). The Automatic Sensor door should also have the provision of manual operation. The work also includes, cost of Supply of MS C Channel, Hollow Pipe, Plate, Fastener with accessories and fixing. The rate shall include labour, loading, transportation, other incidental charges, film on toughened glass if reqd etc., complete as per direction of Engineer in Charge. Material and fittings brand shall be of Ozone, Hafele, Dorma or equivalent. |
| 40 | Providing, fitting and fixing 12mm thk frameless Toughened glass double leaf swing full height door with making holes/ cut outs as required, making edges clear smooth polished with various stainless steel fittings like SS Hinges with necessary Pivot accessories along with fittings like Over Panel , Top Patch , Bottom patch , Over Panel , Wall to Glass clamping patch, Hydraulic hinges, Glass Door Handle back to back installation of 600mmx32mm, door locking system, and necessary door assemblies, rubber gasket, fixed on double action floor spring with proper closing force, etc., as per direction of Engineer in Charge. Material and fittings brand shall be Ozone, Hafele, Dorma or equivalent. The rate shall include labour, loading, transportation, other incidental charges etc.,complete all as specified and as directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 42 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete including demolition of brick work and removal of rubbish beyond MOD land all as specified and directed. |
| 43 | S&F for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bedding in CM 1:6. includig dismantling old plaster complete all as specified and directed. |
| 44 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 45 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 46 | M&L for Pre-polished 80mm thick precast PCC glossy interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 coloured tile to make a pattern as directed, laid over and including 30mm thick sand cushion complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F of brass chromium plated standard quality jet system including jet pipe suitable for European water closet complete all as specified and directed. |
| 48 | S&F in repair 15mm bore 2 in 1 angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed. |
| 49 | S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 50 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed. |
| 51 | S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed. |
| 52 | S&F Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. |
| 53 | S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and directed. |
| 54 | Removing of surplus soil to exc 250 mtr but n.exc 500 mtr and deposited and levelled where directed as a level n.exc 1.5 mtr above the starting point complte all as specified. |
| 55 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping, kerbs, bed plates incl weathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 56 | M&L for Cement concrete 1:2:4 type B2 using 20mm graded stone aggregate as in surface channels and drains |
| 57 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 58 | S&F SFRC manhole covers 900mm x 500mm x 75mm thick factory made, complete all as specified and directed. |
| 59 | M&L for Reinforced concrete pipe class NP2, 300mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed. |
| 60 | M&L for cutting of road as required for laying RCC pipe line etc. including repair/make good with filling of earth, boulders, WBM, BM etc. with top surface finished with 30mm thick ready mixed patch filter. Complete all as specified and as directed by Engr in Charge. |
| 61 | Demolition of cement concrete of any description and in any position not other specifically provided and removing debrish beyond MOD land for complete all as specified & directed. |
| 62 | M & L for Point wiring in complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic concealed rigid PVC conduit medium grade ISI Marked and all conduit accessories etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, with fabricated modular metal flush box duly make embossed, concealed in walls and with suitable size of modular inner and outer cover plates as required for housing modular switches , socket outlet and fan regulators etc , complete all as specified and directed for the followings:- |
| 63 | (a) One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely) complete all as specified and directed |
| 64 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. complete all as specified and directed |
| 65 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 66 | M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified |
| 67 | M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified |
| 68 | M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified |
| 69 | M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified |
| 70 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body, complete all as specified |
| 71 | S&F factory made, sheet steel distribution boards, double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar SPN 08 ways complete all as specified and directed. |
| 72 | M&L MCB SPN 240 volt 32 Amp \\"C \\" curve complete all as specified and directed. |
| 73 | M&L MCB SP 5 to 32 Amp \\"C\\" curve complete all as specified and directed. |
| 74 | Supply and fix LED batten luminaire surface mounted 4 feet system wattage of 20 watts and system lumen≥100 output, CRI>80, power factor>=0.95, THD<10%, color temperature 3000K-6500K, IP-20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range-150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. |
| 75 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary - is >100lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%,THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 76 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed |
| 77 | Supply and fixing, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC armoured, PVC sheathed 10 sq. mm nominal cross section, 2 core. Complete all as specified and directed. |
| 78 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point earth plate surrounding use of charcoal dust and salt in layer including excavation and earth work , GI pipe 20 mm dia light grade for watering with wire mess and funnel and GI pipe 15 mm dia medium grade for protection of earth lead complete upto main DB making of PCC earth pit using 1:2:4 type B1 using 20mm dia stone aggregate provision of MS PIT cover 300mm x300mm with handle complete all as specified or indicated including testing on completion all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender