Tender For Annual Rate Contract For Day To Day Maintenance Work, Labour And Material Supply At Paota District Hospital Jodhpur
Tender Value
6.53 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
3 days left
EMD
13060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Rate Contract For Day To Day Maintenance Work, Labour And Material Supply At Paota District Hospital Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) |
| 2 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :Deep groove pointing |
| 3 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). |
| 4 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision Old Work |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) |
| 8 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 9 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 10 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 11 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)20mm nominal size |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)25 mm nominal size |
| 14 | Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size. 500mm dia 12 Kg.-do-15 MT centre point load (medium duty). |
| 15 | Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately).Rectangular manhole 90x60 cm |
| 16 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M |
| 17 | Building Rubbish Stone metal (Grit and ballast etc.)For 10 Km. |
| 18 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.IIApplying Epoxy primer on the exposed steel bars.IIIApplying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush.IVSpeading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.VPlastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.VICure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 19 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 20 | Labour and Material Supply for Annual Rate Contract at MG Hospital Jodhpur(i) Manpower supply |
| 21 | Fitter Grade-I - 2 Nos. |
| 22 | Carpenter 2nd Class - 1 Nos |
| 23 | Mason 1st Class - 1 Nos. |
| 24 | Beldar - 3 Nos. |
| 25 | (ii) Supply of material |
| 26 | Stone Aggregate (Single size) : 20 mm nominal size |
| 27 | Bajri |
| 28 | Portland Cement |
| 29 | White Cement |
| 30 | F.P.S. bricks class designation 75 |
| 31 | Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) |
| 32 | 15 mm PTMT bib cock |
| 33 | PTMT Angle Stop cock with Flenge 15mm |
| 34 | C.P. Brass bibcock 15 mm |
| 35 | PTMT pillar cock |
| 36 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I white for EWC. |
| 37 | Jet spray for water closet with C.P. Copper Tube flange |
| 38 | European type white glazed vitreous china Ist quality W.C. pan |
| 39 | over flow pipe 185cm |
| 40 | 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 41 | C.P. Brass angle valve 15 mm |
| 42 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. |
| 43 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. |
| 44 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. |
| 45 | PVC Tank Cover Above 500 Lt. capacity |
| 46 | G.I. pipes 25 mm dia (B Class) |
| 47 | G.I. pipes 50 mm dia (B Class) |
| 48 | G.I. Union 25 mm nominal bore |
| 49 | G.I. Union 50 mm nominal bore |
| 50 | White vitreous china laboratry sink600x450x200 mm |
| 51 | P.V.C Waste pipe with PVC nut 32 mm |
| 52 | C.P. Pillar Cock 15 mm nominal size |
| 53 | U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. |
| 54 | UPVC coupler for UPVC drainage pipes 110 mm |
| 55 | UPVC single equal Tee (with door) 110x110x110 mm |
| 56 | UPVC bend 87.5o 110 mm bend |
| 57 | UPVC plain shoe 110 mm bend |
| 58 | Grating Stainless Steel Sheet size 125mm dia. Heavy Quality |
| 59 | PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball |
| 60 | PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball |
| 61 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 62 | Brass full way valve with C.I. wheel (screwed end) 50 mm dia |
| 63 | SS waste coupling 125 mm |
| 64 | C.P. lugs for toilet seat cover. |
| 65 | 15 mm PTMT bib cock long body with flange |
| 66 | Ceramic Mat finished Tiles Ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades |
| 67 | Ist Qulality MAT and glossy finished ceramic tiles Size : 300mm x 450mm |
| 68 | Vitreous china flat back wash basin Size 610 mm x 510 mm |
| 69 | 15 mm C.P. brass tap with elbow operation lever |
| 70 | P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) |
| 71 | Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm |
| 72 | Oxidised mild steel tower bolt (barrel type) 150x10 mm |
| 73 | Chromium plated Brass curtain rod 20 mm dia 1.25mm thick |
| 74 | Brass brackets (curtain rods) 20 mm |
| 75 | Brass handles 125 mm with plate 175x32 mm |
| 76 | Ply wood 5 ply with commercial ply on both faces 6 mm thick |
| 77 | 25 mm thick particle board |
| 78 | 30 mm thick prelaminated flush door shutter |
| 79 | SS wire gauge |
| 80 | Welded mesh 25x25x2.1 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender