Tender For Repair/Maintenance Of Geyser/Solar Water Heaters And Connected Works Under Ge(West)Pathankot
Tender Value
14.94 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
14 days left
EMD
29880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Geyser/Solar Water Heaters And Connected Works Under Ge(West)Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | M&L for attending the Received/ recorded complaint lodged by occupant for the not functioning / breakdown of geyser including taking down and dismantling with complete address along with nature of fault and stores required.The contractor will collect the complaint from the concerned JE in charge and will attend the complaint as per the address and make good the the faulty appliance (Storage type hot water Geyser of any capacity upto 50 Ltrs of any make and type ) with replacement of the necesary parts as required . All the spare parts will be measured and paid seperately in respective following items. Note: Contractor will deploy sufficient Technician and Helper daily to attend the complaint as mentioned. Technician and Helper will report daily at compliant cell of AGE E/M Sub division at 8.30 AM to collect complaints and depart 5pm after attending all complaints. In case of none attending complaints in same day, recovery @ RS 250 per complaints will be recovered from contractor. Quoted rate to be included the Labour charge to replacement of items. |
| 2 | Glass lined incoloy triangular/ threaded type heating element ISI Marked of rating 2.0 KW of size and type as per site requirement incl rubber washers suitable for water heater storage of capacity 25/50Ltrs complete all as specified. |
| 3 | Glass lined incoloy round/square shaped heating element cum assembly ISI Marked of rating 2.0 KW suitable for geyser of make Bajaj/Havells/Racold/Crompton incl rubber washers complete all as specified. |
| 4 | Thermostat 7 inches ISI marked suitable for geysers upto 50 Ltrs capacity of type as per site requirement. The adjustable range shall be 0-75 degree celsius complete all as specified an directed. |
| 5 | Thermostat 11 inches ISI marked suitable for geysers upto 50 Ltrs capacity of type as per site requirement. The adjustable range shall be 0-75 degree celsius complete all as specified an directed. |
| 6 | Capillary Thermostat switch 30-110 for electric water heater storage type suitable for AC 230 volts for geysers upto 50 Ltrs capacity of size as per site requirement. The adjustable range shall be 0-75 degree celsius complete all as specified an directed. |
| 7 | Syphon assembly 6 Hole made out of Stainless steel suitable for 25/50 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified. |
| 8 | All asper Srl item No 7 here-in-before but for 9 Hole assembly. |
| 9 | Thermally insulated stainless steel tank for geyser of capacity 25 Ltrs complete all as specified and directed. Notes: (i) The tank shall be able to withstand water pressure of 8bar. |
| 10 | All as per Srl item No.9 here-in-before but 50 Ltr capacity. |
| 11 | Glass wool suitable for water storage geyser of any cap. |
| 12 | Rubber Gasket heavy duly suitable for 25 ltrs capacity Geyser Make : ISI Make |
| 13 | Outer body of geyser of capacity 25 Ltrs made out of (ABS) Acrylonitrile butadiene styrene material, vertical type of shape as per site requirement with mouting arrangements incl glass wool thermal insulation complete all as specified and directed. |
| 14 | Indicator LED bulb square/round type complete with necessary connection wire of red & green colour all as specified and directed. |
| 15 | NRV made of brass for geyser of capacity upto 50Ltrs complete all as specified and directed. |
| 16 | S&F in replacement stainless steel braided flexible connection pipe with brass hexagonal adopters/nuts on both sides, 15mm bore (450mm long) complete suitable for cold & hot water upto 0-80 degree celcius complete all as specified. |
| 17 | All as per item Srl No 14 here-in-before but of length 600mm. |
| 18 | S&F in replacement 3 Pin Plug Top 16Amps stranded all as specified and directed. |
| 19 | S&F in replacement CP connection heavy duty with nuts, washers and bolts end of size 450mm large. Make : ISI Make |
| 20 | S&F in replacement metal clad plug top 20Amps, 2P+E complete all as specified. |
| 21 | S&F in replacement metal clad plug socket 20Amps, 2P+E complete all as specified. |
| 22 | M&L for carbon steel anchor bolts, nut and washer of size 12mm dia & 100mm length by grouting in wall complete for mounting Geyser of any size all as specified and directed |
| 23 | S&F in repair single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20Amps with breaking cap 10kA complete all as specified and directed. |
| 24 | M&L for Painting of geyser complete at site with synthetic white enameled paint by spraying using standart spary gun for fine finish including fitting cavaties with filler one coat after complete cleaning of dust with sand paper for proper finishing and shape etc. |
| 25 | S&F in replacement MCB SP 240V, 50Hz of rating 20 Amp with breaking capacity of 10 kA incl suitable size pin type copper thimbles complete all as specified and directed. |
| 26 | S&F in repair PVC insulated and PVC Round Sheathed, 3 Core Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt of size 2.5Sqmm and connecting with suitable size of copper/brass thimbles complete all as specified an directed. |
| 27 | S&F in replacement Angle valve heavy duty cast copper alloy polished bright chromium plated Fancy type (ISI Marked) confirming to IS-781 screwed down high pressure with crutch handle screwed both ends for iron pipe of size 15mm bore dia complete all as specified and as directed. |
| 28 | S&F in replacement (MFV) valve complete with fixing arrangement suitable for 25 lts ISI Mark |
| 29 | S&F in replacement fusible plug . |
| 30 | S&F in replacement bottom lid suitable for 25 lts Geysers complete with fixing arrangement etc as required at site. |
| 31 | S&F in replacement NEON bulb suitable for Geyser 25 ltrs . |
| 32 | S&F in replacement clamps complete with suitable size of nuts, bolts and washes (150mm Longe) |
| 33 | S&F in replacement half door set suitable for 25 ltrs capacity Geyser Make : PEARL |
| 34 | S&F in replacement mounting plate suitable for 25 ltrs capacity Geyser Make : ISI Make |
| 35 | Servicing of solar water storage heater of capacity upto 300 LPD after carefully disconnecting cold water and hot water pipes, dismantling evacuated collector tubes, and cleaning/descaling of rust/rubbish material from the water storage tank by chemical washing and refixing the evacuated glass tubes and testing complete all as specified and directed. |
| 36 | All as per ser item No 24 here in before but for capacity 500LPD. |
| 37 | S&F in replacement stainless steel hot water tank for solar water storage heater of cap 100Ltrs with heat exchanger having heat resistant protective coating and insulated with polyurethane foam with scarificial anode and electric back up with 2KW heating element. |
| 38 | All as per ser item No 26 here-in-before but for capacity 300Ltrs. |
| 39 | All as per ser item No 26 here-in-before but for capacity 500Ltrs. |
| 40 | S&F in repair horizontal flat plate collector for 100 LPD solar water heater with dimensions not less than 2000x1200x80mm having low iron tampered toughened glass of thickness note less than 3.0mm, header and riser pipes of red copper, galvanised iron back sheet with glass wool insulation, titanium coated absober plate having absorptance ≥95%±2% & emittance: ≤5%±2% with Aluminium alloy frame complete all as specified and directed. |
| 41 | S&F in repair collector stand for flat plate collector of 100 LPD solar water heater fabricated of 5mm thick powder coated structural steel C channel including cross arms, bracings, supports, clamps, nuts, bolts, washers, welding, bending to shape, drilling holes for bolts, in any shape or size complete all as specified and directed. |
| 42 | S&F in repair evacuated tube collector for solar water storage heater of dia not less than 58mm and length not less than 1800mm with outer tube made of borocilicated glass and inner tube made of copper coated with heat absorption coated material as per existing size complete all as specified and directed. |
| 43 | M&L for Lagging to hot water pipes all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for GI pipes of dia upto 20mm complete all as specified and directed. |
| 44 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender