Tender For Repairs To Leakage/Seepage Internal Water Supply, Plumbing/Sanitary And Connected B/R Works Under Age B/R-I At Ge Jhansi
Tender Value
49 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Leakage/Seepage Internal Water Supply, Plumbing/Sanitary And Connected B/R Works Under Age B/R-I At Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed. |
| 2 | Material & Labour for application/forming of waterproofing liquid membrane moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k as per manufacturers specifications. The treatment shall be carried out to the entire bottom surface and vertical surface upto the bottom height of wall tiles. Adequate curing to be done on vertical surfaces and ponding test for 48 hours on the bottom surface to be carried out complete all as specified and directed. Make :- M/s Asian paint, M/s fosroc, M/s Sikka, M/s BISNOTE :(a) Treatment shall be done through authorised applicator/representative of the manufacturer only.(b) Warranty for water proofing to be submitted by the contractor as per manufacturer norms |
| 3 | Material & Labour for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as preparatory works to water proofing treatment complete all as specified and directed by Engr in charge.Note:-liquid water proofing solution shall be mixed as per manufacturer's instructionst and cost of liquid water proofing solution measured and paid separate item complete all as directed. |
| 4 | Material & Labour Plain cement concrete 1:5:10 Type E2 with 40mm brick coarse aggregate as in mass filling for sunken floor and like complete all as specified and directed |
| 5 | Material & Labour Plain cement concrete 1:4:8 Type D2 using 40mm graded stone aggregate as in mass filling complete all as specified and directed |
| 6 | Material & Labour medium grade 50mm dia G.I pipe as in spout to drain out if any leakage occurs in the sunken portion complete all as specified |
| 7 | Supply only liquid water proofing compound for mixing in cement mortar as per manufacturer instruction, complete all as specified and directed. |
| 8 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 9 | Material & Labour for 25 mm thick PCC 1:2:4 type B0 using 20 mm graded stone aggregate as in sub base etc, complete all as specified and directed by EIC. |
| 10 | Material & Labour for semi skid ceramic colour tiles of size exceeding 0.18 sqm not exceeding 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 11 | Material & Labour for 1st class premium quality jointless Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished dark shade/Double charged/ultra charged , area of each tiles exceeding 0.42 sqm but n exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed by Engr-In-Charge. |
| 12 | Material & Labour for 1st class premium quality Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | Material & Labour for 1st class premium quality Glazed ceramic coloured tiles in vertical surface 300mm X 600mm or 300mm x 450mm set and jointed in neat cement slurry and pointed in white or colour cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. |
| 14 | Supply & Fix in repairs 15 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors including taking down old unserviceable GI tubing complete all as specified and as directed. |
| 15 | Supply & Fix in repairs 20 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors including taking down old unserviceable GI tubing complete all as specified and as directed. |
| 16 | Supply & Fix in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks, white colour, Triple Layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve all as specified in SSR Part I and including disconnecting and dismantling old unserviceable PVC water tank complete all as specified and as directed. Note: The old Unserviceable tank shall be removed from site. |
| 17 | Supply & Fix in repairs 1000 litres capacity Rotational moulded polyethylene water storage tanks, white colour, Triple Layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve all as specified in SSR Part I and including disconnecting and dismantling old unserviceable PVC water tank complete all as specified and as directed. Note: The old Unserviceable tank shall be removed from site. |
| 18 | Disconnecting existing tanks, setting aside (or lowering if required) for replacement, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks, Date of cleaning of tank will be marked on the tank by stencil with synthetic enamelled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. |
| 19 | Disconnecting existing tanks, setting aside (or lowering if required) for replacement, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank by stencil with synthetic enamelled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. |
| 20 | Supply & Fix in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142 gms ) |
| 21 | Supply & Fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) |
| 22 | Supply & Fix of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as directed. |
| 23 | Supply & Fix of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,,including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as directed. |
| 24 | Supply & Fix 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 25 | Supply & Fix 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 26 | Supply & Fix 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed. |
| 27 | Supply & Fix 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed. |
| 28 | Supply & Fix PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in cement solvent complete all as specified and directed. |
| 29 | Providing and fixing Table Top white Vitreous China wash basin of specified size and model, 32mm CP brass waste coupling, C.P brass pillar cock 15mm size having long neck and Aerator, C.P brass bottle trap 32 mm size, extension pipes, wall flanges and concealed G.I clamps complete including making necessary holes and other cutting in the counter top and fixing the wash basin, pillar cock rigidly including making good the walls wherever required all complete as per the architectural drawings and as directed by Engineer-in-Charge. Make of Wash Basin : Cat No.91097 of Hindware (390x390x150 Oval shape) or equivalent of approved makes. CP brass pillar cock Model No. 570012 of Hindware make or equivalent) C.P. Brass bottle trap (Model No. F85003 250X175 of Hindware make or equivalent) (The rate is inclusive of wash basin, waste coupling, pillar cock, bottle trap, brackets, all other fittings and accessories required for completion of work. For the purpose of payment, only the number of wash basins provided and fixed in position shall be considered). |
| 30 | Supply and Fix in replacement of 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long complete all as specified and directed. |
| 31 | Supply & Fix in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but excluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. |
| 32 | Supply & Fix in replacement of 1st quality vitreous china ware European type WC with \\"P\\" or \\"S\\" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as specified and directed. |
| 33 | Supply & Fix in replacement ceramic One Piece Water Closet including soft closing seat cover and all necessary fittings of suitable size all as per Hindware cat part No 20107 (P-18/S-22) or equivalent as approved complete all as directed. |
| 34 | Supply & Fix SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with CM to floor/nahani traps etc, complete all as specified and directed. |
| 35 | Supply & Fix in replacement 600x450mm size and 4mm thick bevelled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and including fixing accessories, complete all as specified and directed. |
| 36 | Supply & Fix in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | Supply & Fix in repairs 15 mm bore Bib taps long body fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 38 | Supply & Fix in repairs 15 mm bore stop/angle cock fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 39 | Supply & Fix in repairs 15 mm bore concealed type stop cock fancy type, chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 40 | Supply & Fix in repairs 15 mm bore Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 41 | Supply & Fix in replacement 15 mm bore Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. |
| 42 | Supply & Fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 43 | Supply & Fix in replacement of Corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as specified and directed. |
| 44 | Supply & Fix in replacement brass bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. |
| 45 | Supply & Fix in replacement Stainless Steel Foldable towel rack 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed. |
| 46 | Supply & Fix in replacement 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 47 | Supply & Fix in repair Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling, including PTMT PVC connection 600mm complete all as specified and directed Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). |
| 48 | Supply & Fix in repairs CP Pillar cock, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed. |
| 49 | Supply & Fix in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 50 | Supply & Fix in repairs Stainless steel Shower arm 20mm dia 450mm long with wall flange (Similar to Model No: SHA 479L450) with Shower rose of 200mm dia round shaped Chrome plated ABS body complete all as specified and directed. |
| 51 | Supply & Fix in replacement Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed. |
| 52 | Supply & Fix in replacement PVC waste pipe 32 mm dia 750 mm long for wash hand basin or for kitchen sink, complete all as specified and directed. |
| 53 | Supply & Fix in repair waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as directed. |
| 54 | Supply & Fix in repair sink coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as directed. |
| 55 | Supply & Fix in repair of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed. |
| 56 | Supply & Fix in repair of towel rail 20mm dia 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed. |
| 57 | Supply & Fix in replacement hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed. |
| 58 | Supply & Fix in replacement 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 59 | Supply & Fix in replacement 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 60 | Supply and fixing in repair for Stainless steel sink with Drainage board , With Sound Reduction Pad on Bottom and All Sides With Anti-Condensation Coating Depth :228 mm (9″) Thickness :1 mm Radius : R10 Product Dimensions Over all Size : 1400×500 mm(55″x20″) Bowl Size : 460x460x228 mm (18″x18″x9″) including with Plastic Sink Connector of Required size and sink waste pipe of approved brand including painting fitting & brackets, cutting and making good the wall wherever required complete all as specified and directed. |
| 61 | Demolition of RCC Not exceeding 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab, RCC jalli and similar suspended work complete all as specified and directed. |
| 62 | Dismantling for Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in any mortar, complete all as specified and directed. |
| 63 | Material & Labour for RCC M-20(Nominal Mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed. |
| 64 | Material & Labour for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 65 | Material & Labour for machine cut granite (of any type) tiles 20mm thick, bedded and jointed in counter with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe complete all as specified and as directed. |
| 66 | Supply & Fix in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and including 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx. size 550 mm x 450 mm with approx. bowl size of 500 mm x 375 mm x 200 mm etc, complete all as specified and directed |
| 67 | Material & Labour for providing ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and replugging holes etc in apron complete all as specified and as directed. |
| 68 | Material & Labour for treatment soil under existing floor using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand) to match the existing floors. |
| 69 | Material & Labour for providing ATT at point of contacts of wood work by chemical emulsion in oil or kerosene based solution ) @ 0.50 litres/per holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and as directed. |
| 70 | Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 71 | Material & Labour for brick work subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in built in cm (1:6), complete including demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed |
| 72 | Material & Labour for rendering 10mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 73 | Material & Labour for 15 mm thick rendering in CM (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 74 | Material & Labour for Rendering 5mm thick in CM (1:3) as in ceilings concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 75 | Material & Labour for preparation of new plastered surface and of wall and applying two coats of oil bound distemper, over and including a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 76 | Material & Labour for preparation of new surface of wall by brush , sand paper, surface replacement if required etc on surface and applying two coat of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 77 | Material & Labour for preparation of new ceiling surfaces and applying three coat of white wash, complete all as specified and directed. |
| 78 | Material & Labour 18mm thick prelaminated WPC, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work including dismantling of old board in any position, complete all as specified and directed. |
| 79 | Supply & Fix 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work including dismantling of old board in any position, complete all as specified and directed. |
| 80 | Providing and fixing 100 mm long stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 81 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make long with screws etc. complete as per directions of Engineer in-charge. |
| 82 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 83 | Supply & Fix fanlight magnetic catch with 14mm catch cast brass and fixed to cupboard shutters all as specified and as directed |
| 84 | Supply & Fix continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed |
| 85 | Material and labour for preparation of old plastered surface and applying Two coat of oil bound distemper using auto roller for making the surface uniform complete all as specified and directed. |
| 86 | Material & Labour for preparation of existing surface of walls by complete removal of existing treatment and applying two coats of Oil bound distemper over and including a layer of wall care putty for complete smooth finish of surfaces complete all as specified and directed. |
| 87 | Material & Labour for preparation of existing surface of walls by complete removal of existing treatment and applying two coats of distemper oil bound (using Roller) white or any tinted on ceiling complete all as specified and directed. |
| 88 | Material & Labour for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 89 | Material & Labour for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 90 | Material & Labour for preparation of existing surface of walls by complete removal of existing treatment and applying two coat of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 91 | Material & Labour for preparation of old surface of wall by brush , sand paper, surface replacement if required etc on surface and applying a coat of cement based paint complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender