Tender For Annual Rate Contract Forconstruction Of 200 Mm & 150Mm Dia Tw & Supply , Installation Of Pump Sets, Feeder Panels & Allied Works At Various Schemes Under Jurisdiction Of Dn Baran, Dist. Baran
Tender Value
1.49 Crore
Estimated cost
Bid Submission
17 Aug 2026
9 days left
EMD
2.98 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baran → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract Forconstruction Of 200 Mm & 150Mm Dia Tw & Supply , Installation Of Pump Sets, Feeder Panels & Allied Works At Various Schemes Under Jurisdiction Of Dn Baran, Dist. Baran
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe. |
| 2 | Nominal bore 150 mm dia. |
| 3 | Nominal bore 200 mm dia. |
| 4 | Add 15% extra on above item (Item No 2 to 3) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. |
| 5 | Add 30% extra on above item (Item No 2 to 3) for drilling depth beyond 200 mtr and from ground level, rate shall be applicable for only extra depth beyond 200 mtr . |
| 6 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes |
| 7 | 150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) |
| 8 | 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) |
| 9 | Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. |
| 10 | 150 mm dia nominal bore of 4.8 mm thickness |
| 11 | 200 mm dia nominal bore of 5.4mm thickness |
| 12 | Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply. |
| 13 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. |
| 14 | 32 mm dia |
| 15 | Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. |
| 16 | Up to 2.0 KW |
| 17 | Above 2.0 KW |
| 18 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. |
| 19 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 20 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 21 | 7.5 KW (10 HP) & head up to 120 mtr. |
| 22 | 7.5 KW (10 HP) & head above 120 mtr. |
| 23 | 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 24 | 9.3 KW (12.5 HP) & head above 120 mtr. |
| 25 | 11 KW (15 HP) & head up to 120 mtr. |
| 26 | 11 KW (15 HP) & head above 120 mtr. |
| 27 | 13 KW (17.5 HP) & head up to 120 mtr. |
| 28 | 13 KW (17.5 HP) & head above 120 mtr. |
| 29 | 15 KW (20 HP) and above, head up to 120 mtr. |
| 30 | 15 KW (20 HP) and above, head above 120 mtr. |
| 31 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. |
| 32 | Above 5 HP and up to 10 HP |
| 33 | Above 10 HP and up to 15 HP |
| 34 | Above 15 HP and up to 20 HP |
| 35 | Above 20 HP and up to 30 HP |
| 36 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. |
| 37 | 3 core 4.0 Sq.mm |
| 38 | 3 core 6.0 Sq.mm |
| 39 | 3 core 10.0 Sq.mm |
| 40 | 3 core 16.0 Sq.mm |
| 41 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 42 | 10.0 Sq.mm, 4 core |
| 43 | 16.0 Sq.mm, 4 core |
| 44 | 25.0 Sq.mm, 3.5 core |
| 45 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. |
| 46 | 50 mm dia |
| 47 | 65 mm dia |
| 48 | 80mm dia |
| 49 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 50 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere meter, volt meter, phase preventer, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. |
| 51 | Up to 5.00 HP |
| 52 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 53 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. |
| 54 | 150 mm dia |
| 55 | 200 mm dia |
| 56 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. |
| 57 | 40 mm dia |
| 58 | 50 mm dia |
| 59 | 63 mm dia |
| 60 | 75 mm dia |
| 61 | Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. |
| 62 | Nominal bore 150 mm dia. |
| 63 | Nominal bore 200 mm dia. |
| 64 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended up to date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia. |
| 65 | 50 mm dia |
| 66 | 65 mm dia |
| 67 | 80 mm dia |
| 68 | Proving and Fixing 32 mm dia Full way valve or wheel valve as per IS:778 or amended up to date of approved make, on pump delivery pipe. |
| 69 | P & F Bib cock (IS : 781 mark), superior quality of approved make , brass 400 gm, 15 mm nominal bore. |
| 70 | Providing and Fixing of ISI marked PVC storage tank of following capacity as per IS: 12701-1989 (of approved make) with cover, 25 mm dia. 1 mtr long GI overflow pipe, 25 cm long 25 mm dia washout GI pipe with plug & socket, including P&F 32 mm dia Ball Cock (Float valve) IS 1703 marked with rod and PVC ball complete with brass weight 1000 gm, including P&F 15mm dia CI quarter turn heavy duty Bib Cocks four no's of superior quality and approved make, including interconnections complete job. |
| 71 | 2000 litre capacity |
| 72 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. |
| 73 | Fabrication & Fixing M.S. Stand of specified class of angle iron L-shaped of 50 mm size with four legs grouted by 300*300*300 mm CC Block M-15 in the ground and all legs tied up with each other through same size of angle iron along with cross bars to support the bottom of 1000 Ltr./ 2000 Ltr. PVC tank complete in all respect. |
| 74 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 75 | Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes |
| 76 | 65 mm dia |
| 77 | 80 mm dia |
| 78 | Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge. |
| 79 | Testing verticality of tube well by plumbing system and yield test and draw down test by pumping system as per IS : 2800 (Part – II) – 1979 or as per amended up to date. |
| 80 | SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 35Amp. AC-3 duty PMC based DC contactors (For Star and Main), 45Amp. 1 Pole Contactor for APSC, 25Amp. Contactor for Delta,Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 5 kVAR, and all necessaryhardware.The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, Complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying fieldconditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 81 | Above 10 HP and up to 15 HP (star delta type ) |
| 82 | SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 32Amp. AC-3 duty PMC based DC contactors (For Star and Main), 40Amp. 1 Pole Contactor for APSC, 22Amp. Contactor for Delta,Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 3 kVAR, and all necessaryhardware.The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, Complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying fieldconditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 83 | Above 5 HP and up to 10 HP (star delta type ) |
| 84 | SITC of Digital Type Star Delta Starter Electrical Control FeederPanel, 100A, suitable for operation of 3-phase pump set on 415VAC supply, comprising input 100Amp. MCCB (TP), GFU withauxiliary contact for earth fault protection, 40Amp. AC-3 duty PMCbased DC contactors (For Star and Main), 45Amp. 1 Pole Contactorfor APSC, 32Amp. Contactor for Delta,Microprocessor based DigitalMotor Protection Unit with necessary protections, RTC timer, MCBsfor power and control circuits, LED indications, Heavy duty terminalconnectors, complete internal wiring with copper conductors (forcontrol and power), capacitor bank of 7 kVAR, and all necessaryhardware.The panel shall be housed in outdoor type fabricated GIenclosure of 1.6 mm thickness, Complete with all standardprotections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying fieldconditions, complete in all respects as per specification and directionof Engineer-in-Charge. |
| 85 | Above 15 HP and up to 20 HP (Star Delta type) |
| 86 | SITC of Digital Type Single Phase DOL Starter Electrical ControlFeeder Panel, 63A, suitable for operation of Single-phase pump seton 215V AC supply, comprising input MCB (DP 63A.), GFU withauxiliary contact for earth fault protection, AC-3 duty PMC based DCcontactors 50 Amp. 1P (DOL type), Microprocessor basedDigitalMotor Protection Unit with necessary protections, RTC timer, MCBsfor power and control circuits, LED indications, Heavy duty terminal,connectors, complete internal wiring with copper conductors (forcontrol and power), capacitor bank and all necessary hardware.Thepanel shall be housed in outdoor type fabricated GI enclosure of 1.6mm thickness, Complete with all standard protections, indicationsand automation features required for safe, efficient and reliableoperation of pump sets under varying field conditions, complete in allrespects as per specification and direction of Engineer-in-Charge. |
| 87 | Upto 5 HP (Single Phase) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender