Public Administrative Department Local Bodies Closing in 8 days TDR #56805038

Tender For _1_Installation Of Decorative Lights At Kunjabihari Pond, Chauliaganj In Ward No. 42.

Issued by Local Bodies · Cuttack, Odisha
Tender Value
7.31 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
8 days left
EMD
7300
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for _1_Installation Of Decorative Lights At Kunjabihari Pond, Chauliaganj In Ward No. 42.

BOQ

Name of Work:- _1_Installation of Decorative Lights at Kunjabihari Pond, Chauliaganj in ward No. 42.
Sl. No. Item Description
1Supply, fabrication, testing and delivery of 3 mtr long decorative steel Poles manufactured from hot-dip galvanised steel pipe, comprising two sections, namely a bottom section of 1000 mm length with 114 mm diameter and a top section of 2000 mm length with 50 mm diameter. the bottom portion shall be provided with an aesthetic ornamental base made of FRP / GRP to conceal foundation bolts, and a cast aluminium ornamental spigot shall be provided at the joint of the bottom and top sections. the base plate shall be 12 mm thick and 300 mm diameter with 200 mm PCD, suitable for 4 nos. foundation bolts of 16 mm diameter and 600 mm length. A service window shall be provided at the bottom of the pole for connector, MCB and cable management. The pole shall undergo extensive surfacetreatment including sand blasting, PU-based etch primer and PU matt finish paint, making it completely rust and corrosion resistant and providing a superior aesthetic finish. CMC logo shall be securely fixed on each Pole complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (Make- Bajaj / HAVELLS / CROMPTON /Philips / Sleex or equivalent make).
2supply, fitting and fixing of 40 Watt. Post-top pathway luminaires complete with spun aluminium housing and pressure die-cost heat sink, ring spun aluminium with black finish powder coating, clear polycarbonate cover, mains terminal 3-way 10 A suitable for terminating up to maximum 2.5 Sq.mm incoming cable, cable entry through mounting pipe, stainless steel hardware, IP65 ingress protection , potted driver BIS approved (electrical safety as per IS 15885) with high surge protection including 4 KV internal and 10 KV SPD, electrical protections against high voltage and short circuit, rated voltage 240 V, frequency 50 Hz, operating voltage range 120-270 V, current 0.657 A @ 240 V, Wattage 150 Watts @240 V, reverse polarity and open voltage protection, THD 0.95, and correlated color temperature (CCT) 3000 K, complete in all respects as per Specifications. (Make: BAJAJ / HAVELLS / CROMPTON /Philips and equivalent make )
3Supply of all materials, labour, T&P and transporation for providing earth work, filling in foundation with clean coarse river sand, RCC M-20 grade RCC foundation (1:2:4) with nominal reinforcement for lighting poles, including provision of two numbers flexible PVC pipes of suitable diameter inserted within the RCC foundation for cable entry, complete with supply and fixing of anchor / tor rods, excavation in all kinds of soil, shuttering, concreting, backfilling, curing and all associated works etc. all complete as per the OPWD specification & direction of Engineer in charge. (For Foundation & erection of Supply and erection of 3 mtr long decorative steel Poles)
4Erection of 3 mtr long decorative pole with the help of suitable tools and tackles & wiring, connection of luminaries with all wiring materials & labouretc as required direction of Engineer in charge.
5Supply, fitting and fixing of Coil Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.
6Supply and laying of 3 core x 6 sq mm PVC insulated PVC sheathed armoured Undarground aluminum cable for interconnection of power supply for the 3 mtr long single arm Decorative Poles to Pole including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineerir-in-charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)
7Supply and laying of 1½\\" OD HDPE Pipe for laying of cable under 700mm (depth may vary as per side condtion) including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. For Laying of cable for power supply from LT Pole to outdoor Feeder Panel and Pole to Pole interconnection of road for the 3 mtr long Decorative Poles as per direction of the Engineer-in-charge.
8Earth work in excavation of foundation trenches in all kinds of soil including ordinary soil, hard soil or gravelly soil, stoney earth & gravel mixed with slushy soil (in water up to 0.6m depth requiring the aid of pans & vessels) including dressing, leveling the bed up to required depth & within initial lead of 50mtrs & 1.5mtrs initial lift etc. complete including cost of all labour charges, T&P required for the work & as per direction of Engineer in charge. 1 x 180 Mtrs. x 0.15 Mtrs.x 0.15 Mtrs. = 4.05 cum.
9Providing and laying un-reinforced plain cement concrete pavement with (1:1½:3) using 12 mm size crusher broken hard granite chips including hoisting, lowering, laying, watering, curring etc. complete as per direction of the Engineer-in-Charge. 1 x 180 Mtrs. x 0.15 Mtrs.x 0.15 Mtrs. = 4.05 cum.
10Supply and drawing of 3 core x 1.5 sq.mm. FR PVC insulated multistrand Copper Flexible Cable of the pole (i.e. at the bottom Section of the pole) to the Fitting which will be fixed at the top of the Post-top Light as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard)
11Supply and fixing of in built junction box with connector, 16Amp. MCB in each pole as per the direction of the Engineer-in-Charge.
12Supply and fixing of LED Strip Tri Colour Light including Driver with Ingress protection : IP65 in the existing Tubular Pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (MAKE: BAJAJ / HAVELLS / CROMPTON / PHILLIPS or equivalent make)
13S/F \\"B\\" SERIES, SP MCB : Supply and fixing of 6 Amp to 32 Amp rating 240 Volts \\"B\\" searies Miniature Circuit Braacker (MCB) for lighting and otherr loads of the following poles in the existing MCB DB ISI marked comple with connections, testing and commissioning etc. as required for power supply to above LED Strip Light as per the direction of the Engineer-in-Charge. (SR Sl. No.2.6). (A) Single Pole (SP) (SR Sl. No.2.6.1)
14Supply and fixing of 2 core x 1.5 Sq.mm. PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming for power supply to above LED Strip Light as per direction of the Engineer- in- charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)
15Supply and fixing of Single Phase outdoor type Panel Board with double door locking arrangement made of 16 SWG C.R sheet of size 2'-0\\" x 1'-6\\" x 1'-0\\" and painting with 2 coats of approved paints i. e. D.A.grey with foundation of size 3'-0\\" x 1'-6\\" x 1'-0\\" . The Panel Board consisting of the following accessories.(i) 100 Amp. Kit Kat - 2 nos. (Make-Anchor/HPL/Havelle/L&T),(ii) 63 Amp. 2 pole \\"C\\" series MCB - 1 no,(iii) 40 Amp. 2 pole NHD Series Contactor – 1 no.(iv) Timer - 1 no(iii) Indicator Lamp - 1 no.,(iv) Danger Board - 1 no., with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the Engineer- in- charge.
16Supply, fitting and fixing of Chemical Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (For Panel Earthing) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56805038
AUTHORITY Local Bodies
TENDER VALUE 7.31 Lakhs
LAST DATE 12-08-2026
Authority
Authority Name Municipal Bodies
Work Description Tender for _1_Installation Of Decorative Lights At Kunjabihari Pond, Chauliaganj In Ward No. 42.
Basic Detail
Tender No MC(KMC)KTC_EL_No.2/2026-27
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 03 Aug 2026
Submission Date 12 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 7.31 Lakhs
Tender Fee 4720
EMD 7300
Exemption Available
Document List
BOQ_603986.xls
db33b162-d0b2-4f25-a4da-a981ae0bf5e0.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_603986.xls

html

db33b162-d0b2-4f25-a4da-a981ae0bf5e0.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders