Tender For maintenance of Road ( Road Marking Paint & Road Safety Work At 45 Mtr Wide Road Sec-151 Jp Aman To Sector-156,157 Crossing) Noida.
Tender Value
3.29 Crore
Estimated cost
Bid Submission
17 Aug 2026
11 days left
EMD
7.78 Lakhs
Bank guarantee accepted
Document Fee
5310
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Road ( Road Marking Paint & Road Safety Work At 45 Mtr Wide Road Sec-151 Jp Aman To Sector-156,157 Crossing) Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Flexible Median Marker As Per IRC 79:2019: Flexible Median Marker (FMM) should be used for improving median visibility during dark hours. Use of Median Marker provides safety against collision happening with medians during night time, or severe weather. Flexible Median Markers shall be provided with fluorescent yellow colour retro-reflective sheeting Type XI as per IRC:67. Flexible Median Marker shall be of tough, high impact resistant, injection-molded, thermoplastic body with property of flexibility to provide high durability and U shape structure having rebound/ bounce back property. the sheeting shall be of Type XI conforming to IRC:67 and it should be on both the faces whereby providing maximum reflectivity at 1,anger distances with adequate durability. The logo of the manufacturer shall be embossed on either side of the body during the injection molding process. FMM shall be fixed by a combination bf epoxy adhesive and grouting/drilling on concrete medians or property constructed solid medians. Height: The marker height shall be a minimum of 180 mm. width 120 mm & Body Thickness: 6.5 mm. the shanks shall not be less than 20 mm and depth shall not be less than 30 mm Reflective Area: Shall not be less than 90 cm square. Proof of the same Report shall be uploaded which quoting tender. The body of FMM shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg conforming 40 ASTM D256 adhesion between the body and outer casing body of FMM shall with stand 50 kg f Tensile loads conforming to ASTM D638 method. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. |
| 2 | Solar Power Road Marker ( Solar Studs) The solar Studs shall be Made of Aluminium alloy and poly carbonate Material Which shall be Absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTMD4280, its Colour may be white, Red, Yellow, Green or blue or Combination as directed by the Engineer. its water resistance shall meet the requirement of IP 65 in Accodance with IS:12063:1987 Category 2 for protection against water ingress. the Dimension of Solar Studs shall not be Less than 100 mm X 100 mm x 10 mm. It Flashing rate Shall not be less than 1Hz. Its Should be Able to Give the Prescribed Performance in the temperrature range of -40'C to 55\\"C. Its Life shall be not less than 3 Years. The rate shall include all materials, labour, Equipment, Fabrication, Transpotation, Erection, Installation and incidents all Complete as per Direction of the Engineer-in-Charge. |
| 3 | Providing and applying cold plastic paint two component rolled on surfacing material solvent free, high build two pack seamless, tough, skid resistant, material with has property of attaining 2.0 mm thickness in single coat application white (or as required colour) based on glass and colour retaining acralic cross linking resin system for coloured road surfacing including reflectorising glass beads @ 250 gms per sqm area. Thickness of 2mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royaity etc. all T&P/ machine material and labour required for proper completion of work. including cleaning and cost of all material etc. complete. (All inclusive on bitumen or concrete surface) work shall carried out as per IRC 35 2015 Cluase 2.2) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender