Tender For Welcome Maintenance Of Offrs, Jcos & Or Md Accommodation At Birpur Under Age B/R-Ii Of Ge Dehradunn.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Of Offrs, Jcos & Or Md Accn At Birpur Under Age B/R-Ii Of Ge Dehradunn.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 3 | Material and Labour for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed. |
| 4 | Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 5 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement complete all as specified and directed. |
| 6 | Material and labour for rendering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed . |
| 7 | Material and labour for rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement) complete all as specified and directed |
| 8 | Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 9 | Material and labour for preparation of newly plastered surface of external wall by application of 1mm wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. |
| 10 | Material and labour for white washing three coats on wall including preparation of newly plastered surfaces.complete all as specified and directed. |
| 11 | Material and labour for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of pink primer complete all as specified and directed |
| 12 | Material and labour for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coats of synthetic enamel paint (Ist quality)over a coat of red oxid primer. Complete all as specified and directed |
| 13 | Material and labour for complete removal of existing treatment to wall and applying one coat of wall putty 1mm thick applying two coats of oil bound distemper on internal wall putty surface on walls in any height complete all as specified and directed. |
| 14 | Material and labour for preparation of old plastered/ treated surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed. . |
| 15 | Description all as per itme No 13 but two coats of oil bound distemper. |
| 16 | Material and labour for preparation old treated surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 17 | Material and labour for preparation old treated surfaces of ceiling and applying one coat of oil bounnd distember complete all as specified and directed. |
| 18 | Material and labour for preparation old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 19 | Material and labour for preparation of old decorated surfaces of wood and wood based materials, wooden, plastered, concrete surfaces of any descriptions not otherwise described over 10Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 20 | Material and labour for preparing old painted steel and Iron surfaces of any description over 10 cm Width /Girth and applying one coats of synthetic enamel paint of any tint complete all as specified and directed. |
| 21 | Material and labour for complete removal of existing treatment of external wall and application of 1mm wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. |
| 22 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of cement base paint in any tint complete all as specified and directed. |
| 23 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 24 | Material and labour for cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) 75 mm thick as in sub bases of floor complete all as specified and directed. |
| 25 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 3.0 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 26 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed. |
| 27 | Material and labour for joint free Non- skid coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (square/rectangular) area of each tile 400X400X7 to 8 mm thic in floor etc incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 28 | Material and labour for joint free Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 29 | Material and labour for joint free coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white of coloured cement to match the shade of the tiles complete all as specified and directed. |
| 30 | Material and labour for coloured vitrified light shade tiles of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 31 | Description all as per item No 29 above but as in skirting/dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 32 | Material and labour for of 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15 mm thick screed bed in cement mortar 1:6 incl full round bull nosing and dismentling of old stone complete all as specified and directed. |
| 33 | Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 34 | Material and labour for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 35 | Material and labour for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like including necessary formwork etc complete all as specified and directed. |
| 36 | Material and labour for polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed. |
| 37 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.Complete all as specified and directed |
| 38 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each.Complete all as specified and directed |
| 39 | Taking down door shutters of size exc 1 Sqm and n exc 2 sqm removing from site complete all as specified and directed. |
| 40 | Supply and fixing of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 41 | Supply and fixing of 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 42 | Supply and fixing of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | Supply and fixing in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 44 | Supply and fixing of PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed. |
| 45 | Supply and fixing of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 46 | Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 125x65 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 47 | Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 105x65 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 48 | Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 49 | Supply and fixing 30 mm thick WPC factory made Glazed and skeleton shutter (conforming as per IS-4020) made from 100% lead free single extruded open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 50 | Supply and fixing of SS butt hinges 100mm long medium weight cold rolled mild steel complete all as specified and directed. |
| 51 | Supply and fixing of stainless steel tower bolt 150mm long of extruded section complete all as specified and directed. |
| 52 | Supply and fixing of aluminium alloy, anodised, sliding door bolt 250mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 53 | Supply and fixing of stainless steel bow handle \\"D\\" type anodized 150mm long complete all as specified and directed of make prayag and equivelent.. |
| 54 | Supply and fixing of stainless steel bow handle \\"D\\" type anodized 100mm long complete all as specified and directed. |
| 55 | Supply and Fix in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified and directed. |
| 56 | Supply and Fix in repair 300 mm mild steel, ordinary rat tail rod pattern springs of brass including roller and roller plate, complete all as specified and directed. |
| 57 | Supply and Fix in repair Aluminium extreded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 58 | Supply and Fix for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod ,incl taking down old curtain rod or pelmet boxes complete all as specified and directed. |
| 59 | Dismantling boarding any description, fixed in any position with nails complete all as specified and directed |
| 60 | Supply and fixing of 18 mm thick PVC board one side prelaminated, density 600 and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 61 | Supply and Fix of 18 mm thick PVC board , density 600 and both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 62 | Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed. |
| 63 | Supply and fixing of magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 64 | Supply and fixing of Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 65 | Supply and fixing of D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.Make Hettich/Harrison/Dorsel. |
| 66 | Supply and Fix in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 67 | Supply and Fix in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 68 | Supply and Fix in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 69 | Supply and Fix in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 200 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 70 | Supply and Fix in repair chrome plated stainless steel wire basket (bottle pull out basket) pull out type for large utensils of size 120 x 500 x 432 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 71 | Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed. |
| 72 | Supply and Fix for Glazing with plain sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed |
| 73 | Supply and Fix for Glazing with frosted sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed |
| 74 | Supply and fixing of aluminum powder coated three track sliding windows with two sliding shutters with glass panes and one sliding shutters with SS wire cloth) including suitable beading channel gasket, rollers Maruthi lock with handles etc complete with following specification including taking down existing window etc complete all as specified and directed:-Frame :- 30mmx100mmx1.50mmShutter stiles, top & bottom :- 40x18mmPanel :- 5.50mm thick tinted sheet glass of selected quality fixed to aluminum frame with beadind, rubber gasket. Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with approprriate size powder coated aluminum section on external faces of window. |
| 75 | Supply and fixing of aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification including taking down existing window etc complete all as specified and directed:-Frame :- 60mmx40mmx1.50mmPanel :- 4mm thick ACP sheet / 4mm thick tinted/frosted glass of approved colour and design |
| 76 | Supply and Fixing of aluminum anodized powder coated door shutter with frames of size - 40x45x1.5 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.5 mm thick fixed to wall with necessary screws and plug complete including taking down existing door etc complete all as specified and directed:-. (rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item ) |
| 77 | Supply and Fixing in repair of hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 78 | Material and labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width including dismantling of old ceiling complete all as specified and directed. |
| 79 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia .complete all as specified and directed. |
| 80 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia .complete all as specified and directed. |
| 81 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good existing surface, cutting not exc 10 cm girth in brick walls etc complete all as specified and directed. |
| 82 | Refixing old steel tubing of 15 mm bore medium grade, to walls and ceilings or laying in floors complete all as specified and directed |
| 83 | Refixing old steel tubing of 20 mm bore medium grade, to walls and ceilings or laying in floors complete all as specified and directed |
| 84 | Supplying, fixing, jointing and testing galvanised steel water tubing 15mm dia bore medium grade (ISI Marked) with all fittings (ISI Marked) such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors complete all as specified and directed |
| 85 | Supplying, fixing, jointing and testing galvanised steel water tubing 20mm dia bore medium grade (ISI Marked) with all fittings (ISI Marked) such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors complete all as specified and directed Please Enable Macros to View BoQ information |
| 86 | Supplying, fixing, jointing and testing galvanised steel water tubing 20mm dia bore medium grade (ISI Marked) with all fittings (ISI Marked) such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender