Tender For Special Repair To Building No. P- 255 And P-251 At Hisar Mil. Stn Under Ge West Hisar
Tender Value
74 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
1.36 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. P- 255 And P-251 At Hisar Mil. Stn Under Ge West Hisar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | SPL REPAIR TO BLDG NO P 255 AND P 251 AT HISAR MIL STN UNDER GE WEST HISAR | Date | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each and complete all as specified and directed. |
| 3 | S&F made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 4 | -ditto- all as per item No 3 above but of frame size 65 x 100mm |
| 5 | -ditto- all as per item No 3 above but of frame size 65 x 125mm |
| 6 | Factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: Stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 7 | S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 75mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note 1: Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the disturbed surfaces complete all as specified and directed.2 Front Face shall only be measured for payment purpose. |
| 8 | S & F in repair of 18 mm thick PVC solid board for making cupboard with partition and door complete all as specified and directed by Engr in Charge. |
| 9 | S&F 30mmthick factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum an door to be panelled with SS mosquito mesh an XTN aluminium meshfor aditional strength and safety purpose hologram to be clearly visible on material, Manufacturer test certificates to be submitted complete all as specifie and as directed by Engr-in-Charge. Note : Stainless steel butt hinges and necessary S S screws shall be paid separately |
| 10 | S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded. The rates include for painting with 50 micron thickness of powder coated painting over a shop coat of zinc chromate primer with approved colour as directed by Engineer-in-Chage. |
| 11 | S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with 50 micron thickness of powder coated painting over a shop coat of zinc chromate primer with approved colour as directed by Engineer-in-Chage. |
| 12 | S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed. The rates include for painting with 50 micron thickness of powder coated painting over a shop coat of zinc chromate primer with approved colour as directed by Engineer-in-Chage. |
| 13 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather roof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 14 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 15 | S&F Powder coated Anodised aluminium frame for doors with one or more rebates including joining cleat for fixing etc. including joining cleats and rubbers as required for fixing etc. complete all as specified and directed. |
| 16 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 17 | S&F in repair door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete |
| 18 | S&F sheet glass 4.8 mm thick ordinary quality in squares exc 0.5 sq m each pane all as specified. |
| 19 | S & F mild steel, 4-lever, mortice lock, vertical type, size 100mm complete all as spd. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 21 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed. |
| 22 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410-W (Gde -E-250) quality-A. |
| 23 | Dismantling plain or corrugated steel sheeting of any type asbestos/steel, any gauge, thickness, including Nainital or similar pattern roof covering sheets |
| 24 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 25 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 26 | M&L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed. |
| 27 | S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters. |
| 28 | Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and complete all as specified and directed. |
| 29 | Supply and fixing acrylic frosted/figured sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including and complete all as specified and directed. |
| 30 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 31 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 32 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 33 | S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 34 | S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 35 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 36 | M&L for 50 mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 37 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 38 | M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with Epoxy to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed. |
| 39 | M&L Vitrified dark shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, and not exc 1 sqm in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 40 | M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxy to match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 41 | Demolition of stone slabs and tiles of any description or thickness in floors,walls aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 42 | M&L Black Granite(of any type), 20 mm thick machine cut laid over cement screed as in Cooking Platform, counter table & in vertical and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 15mm thick (1:6) screed bed or bedding in cement mortar 1:6 complete all as specified and directed. |
| 43 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area). |
| 44 | M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed (Note : Single piece tiles will be placed on the surface of stair case riser area). |
| 45 | Grinding and polishing of existing kota stone floor as directed by Engineer-in-Charge complete |
| 46 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 47 | Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storeys ,RCC Water tanks and similar suspended work of any type and description not otherwise described for and all as spd and directed. |
| 48 | M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form works complete all as specified and directed. |
| 49 | M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like incl necessary form works complete all as specified and directed. |
| 50 | S&F TMT Mild Steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips. |
| 51 | M&L for formwork of soffits of suspended slabs such as roof slab, floor slabs, landings, shelves and similar work, not exc 200mm thick fair finished surfaces of concrete complete all as specified and directed. |
| 52 | M&L for formwork of Formwork to fins, louvers, fascia and similar work, not exc 200mm thick fair finished surfaces of concrete complete all as specified and directed. |
| 53 | Dismantling roof tiles, single layer on roofs complete all as specified & directed. |
| 54 | Demolition of mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof) complete all as specified & directed. |
| 55 | M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 50 mm thick (average) PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope as in bedding, coping and kerb complete all as specified and directed. |
| 56 | M&L for providing 10mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30%) over slab and applying priming coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm over dried 1st coat complete all as specified and directed. |
| 57 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one. |
| 58 | Supply & fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe and flushing cistern 10 ltr capacity etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 60 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) |
| 61 | S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 62 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 63 | Supply&Laying of CPVC pipe, SDR 11 , 20mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe |
| 64 | S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed. |
| 65 | S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed. |
| 66 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 67 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 68 | Re-fixing old 20mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd in new or old position and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 69 | Dismantling water tanks, open or closed, in position and removing to store of capacity exc 500 ltr but n.exc 1000 ltr. |
| 70 | S&F 15mm dia CP angle valves complete all as specified and directed. |
| 71 | S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. Make Jaquar cat pat No MQT-519KN or equivalent in list of makes |
| 72 | S&F CP Central Hole Basin Mixer with Popup waste with 450 mm long mm Long Braided Hoses complete all as specified and directed. Make Jaquar Cat pat No COS-101051B or equivalent in list of makes |
| 73 | S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 74 | S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 75 | S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 76 | S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed. |
| 77 | S&F SS , premium type, peg set 6. heavy weight complete all as specified and directed. |
| 78 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 79 | S&F 750 x 1200mm with smooth edges along with fixing accessories of selected quality glass, complete all as specified and directed. |
| 80 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 81 | S&F chromium plated Tubular towel rail, 18/20mm dia, D type, 60cm long between flanges, fixed withl screws complete all as specified and directed. |
| 82 | S&F superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos of each opening and fency type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed. |
| 83 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waste pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate co,mplete all as specified and directed. |
| 84 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 85 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 86 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 87 | S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 88 | S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 89 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 90 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 91 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 92 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 93 | M & L for Brick work with Fly Ash Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete and all as specified and directed. |
| 94 | M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete and all as specified and directed. |
| 95 | Taking down cement plaster of any description upto three storeys including necessary scaffoldings including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 96 | M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed. |
| 97 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make complete all as specified and directed. |
| 98 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make with and including complete removal of existing treatment of any layer of wall by sanding with internal dust extraction system for clean environment and complete all as specified and directed. |
| 99 | M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed. |
| 100 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed. |
| 101 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed. |
| 102 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed. |
| 103 | Supply only liquid water proofing compound. |
| 104 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of acrylic smooth exterior paint over and incl of a coat of exterior wall primer as aprproved by Manufacture. |
| 105 | M&L for Complete removal of existing treatment by sanding with internal dust extraction system for clean environment and washing down of distempered and painted surfaces and M&L applying two coats of acrylic smooth exterior paint over and incl of a coat of exterior wall primer as aprproved by Manufacture. |
| 106 | S&F rotational moulded polythene three layer water storage tank 1000 ltrs in white colour (cylindrical vertical with closed top made up of 1mm thick MS steel sheet cover with locking arrangements) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 107 | S&F 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 108 | S&F 20mm bore dia nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed. |
| 109 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed. |
| 110 | S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed. |
| 111 | M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors all as specified. |
| 112 | Dismantling of stone slabs and tiles of any description or thickness in floors,walls aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 113 | M&L Chequered cement concrete tiles 20 cm X20 cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and pigment and complete all as spd and directed |
| 114 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 115 | M&L for sand cushioning layer for laying PCC interlocking paver block complete all as spd and directed. |
| 116 | Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed. |
| 117 | Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200mm dia complete all as specified and directed. |
| 118 | S&F RCC pipe class NP-2 laid to slope in trenches jointed and tested complete with collars for 150 mm dia pipe complete all as specified and directed. |
| 119 | All as per above item No 118 but 200 mm dia. |
| 120 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed. |
| 121 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe complete all as specified and directed. |
| 122 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed |
| 123 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 124 | Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 125 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete. |
| 126 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete. |
| 127 | M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:6 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete |
| 128 | Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete. |
| 129 | S&F for pipe supporting clamping - Single pipe of dia of 110mm (4\\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \\"C\\" channel with ribs to be used of size 50mm (10\\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01. |
| 130 | S&F for pipe supporting clamping - Single pipe of dia of 75mm (3\\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \\"C\\" channel with ribs to be used of size 50mm (10\\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01. |
| 131 | S&F for pipe supporting clamping - Single pipe of dia of 20mm(3/4\\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \\"C\\" channel with ribs to be used of size 50mm (10\\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01. |
| 132 | Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storeys, RCC Water tanks and similar suspended work of any type and description not otherwise described for and all as spd and directed. |
| 133 | M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and complete all as specified and directed. |
| 134 | All as per above item No 133 above but here-in-after in beams |
| 135 | All as per above item No 133 above but here-in-after but in columns |
| 136 | All as per above items No 133 but in foundations, including rafts, footings, foundation beams : plinth beams : bases for columns etc; basement slabs under reamed piles and mass concrete. |
| 137 | M&L for formwork of soffits of suspended slabs such as roof slab, floor slabs, landings, shelves and similar work, not exc 200mm thick rough finished surfaces of concrete complete all as specified and directed. |
| 138 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 139 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 140 | S&F TMT Mild Steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips. |
| 141 | Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete. |
| 142 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge |
| 143 | All as per Item no. 142.00 (here-in-before) but excluding conduit |
| 144 | Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs,MCBs, etc) and making good to disturbed surfaces of walls, floor etc. |
| 145 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in existing PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified |
| 146 | All as per item No 145.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board |
| 147 | All as per item No 145.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board |
| 148 | All as per item No 145.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd. |
| 149 | All as per item No 145.00 above but point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable for one 3 pin 15 Amps socket FOR AC |
| 150 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic new concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified |
| 151 | All as per item No 150.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board |
| 152 | All as per item No 150.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board |
| 153 | All as per item No 150. above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd. |
| 154 | All as per item No 150. above but point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable for one 3 pin 15 Amps socket FOR AC |
| 155 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed |
| 156 | S&F Modular switch 1 way 16A 1 module all as specified and directed |
| 157 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 158 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type 230 Volts, AC complete all as specified and directed. |
| 159 | S&F Modular lamp holder, insulated body with back plate including LED Bulb of 9 watt suitable for batten fittings and complete all as specified and directed |
| 160 | S&F of 12 Watt LED bulb suitable for holder complete all as specified and directed. |
| 161 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 162 | M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked,all as specified & directed |
| 163 | Supply and fixing modular bell push 6A 1 module all as specified and directed. |
| 164 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed |
| 165 | Supply & fixing Modular type (1/2 module as per site requirement) ceiling fan regulator electronic step type suitable for 1200mm/1400mm sweep fan complete all as specified. |
| 166 | S&F LED light fitting 1x40watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification (i) surge protection of minimum 2 KV (ii) power factor should be more than 0.90 (iii) cool white colour, (iv) total hormonic distoration (THD) should not be more than 15% (v) lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin |
| 167 | S&F Inverter type Rechargeable LED Batten light fitting 40 watt 4 feet long includes LED tube complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks. Led Batten fitting should be of Elegant design offers high Brightness,Energy Saving,and Upto 4 hrs Back up( when Mains supply is off but switch is on condition), having Powerful lithium battery-2600 mah, battery life -500+ Recharge Cycle,Charging Time-8 hrs to 10 hrs with lumen output should not be less than 100 lumens/Watt ,Corelated colour should be minimum 6000 degree Kelvin, sleek and modern design, emergency light is suitable for use in a variety of indoor, and automatically charges when switch is ON complete all as specified and directed by Engr-in-Charge. |
| 168 | S&F i Sheet metal enclosure distribution board SP&N,12 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed |
| 169 | S&F i Sheet metal enclosure distribution board SP&N,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed |
| 170 | Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB |
| 171 | Supply and fixing MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB |
| 172 | S&F i Sheet metal enclosure distribution board VTPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCCB as incoming and /TPNMCB's as outgoing in DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed |
| 173 | Supply and fixing MCCB 4 Pole 63 Amps, 415 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the TPN should be the same as that of DB |
| 174 | Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. all as specified and directed. |
| 175 | M & L for submain wiring alongwith earth wire with the 2x6.0 sq. mm +1x6.0 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required(The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). |
| 176 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP Please Enable Macros to View BoQ information |
| 177 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender