Tender For Special Repair / Replacement Of Stp At Raspunja Mil C Under Ge (C) Kolkata
Tender Value
43.82 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
87640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair / Replacement Of Stp At Raspunja Mil C Under Ge (C) Kolkata
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Aug-2026 | BOQ | BOQ | 21-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: SPL REPAIR / REPLACEMENT OF STP AT RASPUNJA MIL CAMP UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismentling of AC (corrugated, semi corrugated) sheet in roof covering incl ridges complete all as specified and directed. |
| 3 | Dismantling steel poles/struts, any size complete all as specified and directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 6 | Taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 7 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm each complete all as specified and directed |
| 8 | All as item No. 49 here in before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 9 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | Dismantling of stone slab and tiles of any desecription or thickness in floor aprons etc complete all as specified and as directed. |
| 11 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as spcified and directed. |
| 12 | S&F steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with galzing bars dovetailed complete all as specified and directed |
| 13 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 14 | M&L rolled mild steel section Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing for (Fe-410 E-250) quality 'A' grade complete all as specified and directed. |
| 15 | M&L preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 16 | M&L for applying Preparation new or previously untreated surface of steel and iron work of any description not otherwise described over 10cm width or grith and two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed |
| 17 | Excavation in post holes in soft /loose soil nexc 0.50 Cubic metter each and getting out, returning, filling and ramming earth or broken rubble moxed with earth around, in layer nexc 25cm, watering and removing of surplus soil to distance not exc 50meter and making good surface complete all as specified |
| 18 | M&L brick work using fly ash pulverized bricks old size class designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 19 | All as item No. 17.00 here in before but half brick thick brickwork to any radius built in CM 1:4 complete all as specified and directed. |
| 20 | M&L Rendering 15mm thick in CM (1:4) fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and as directed.Note : WPC shall be measured and paid separately |
| 21 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 22 | \\"Supply only\\" liquid water proofing compound as required. |
| 23 | S&F PVC coated chain link fencing mild steel galvanised 3.00mm dia (minimum weigth 3Kg/Sqm) of wire and spacing 75mm x 75mm including line wires to any standards, rails and straining bolts including provision of binding wire complete all as specified and directed.Note :- Line wire, round bar, Flat iron and bolts/nuts shall be measured and paid separetaly under relevant item of BOQ |
| 24 | M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 25 | S&F for 4.80mm thick sheet glass, selected quality and glazing with oil putty/rubber bedding in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 26 | S&F Mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 27 | S&F Mild Steel Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 28 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 29 | M&L Plain Cement Concrete 1:3:6 (40 mm graded crushed stone aggregate) type C2 as in foundation filling and mass conc, etc., complete all as specified and as directed. |
| 30 | M&L 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor, path/hard standing complete all as specified. |
| 31 | M&L preparing old plastered surfaces and applying 3 coat of white wash complete all as specified and directed. |
| 32 | M&L preparing new plastered surfaces and applying 3 coat of white wash complete all as specified and directed. |
| 33 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 34 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade; New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 35 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 36 | M&L for preparation of old surfaces of steel or steel based materials of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified. |
| 37 | Excavation in trenches n.exc 1.5 mtr wide and not excedding 1.5 mtr in depth for laying GI/CI pipes & cable also and gettings insoft /loose soil complete all as specified and directed. |
| 38 | Returning filling including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 39 | Removal of excavated soil to a distance not exc 50 metre away from starting point where directed at a level not exc 1.5m above the starting point. |
| 40 | Taking out existing GI/ CI/ DI/ MS water pipe line of any size (dia) from trenches, walls, vertical position including cleaning and removing any blockages for refixing or removal of unserviceable pipe from site complete all as specified and directed.Note:-(a) Excavation,earth work shall be measured and paid separately. (b) Other all things shall be deemed to be included in the quoted rates. |
| 41 | (a) 100mm bore |
| 42 | (b) 80mm bore |
| 43 | (c) 50mm bore |
| 44 | Supply & fix in Repair of chemical dosing pump of min cap 6 litres/hr @ 4 kg back pressure used in chlorin dosing system working in pulsar rating plastic body including injecting valves, NRV & PVC Injecting pipe, connection & other material required for functioning complete all as specified and directed.Make-RMCO or Declibac |
| 45 | M & L for removing existing sewage pump set of capacity 3/2 HP from base frame after disconnecting suction & delivery lines replacing bearings, gland bush, impellar etc complete and reassembling and fixing back to original position and testing, commissioning etc complete all as directed :- Notes :-(1) Replacement of major parts will be measured & paid separately; (2) Except major, all minor part like nuts & bolts, stud etc including transportation, if required, will be provided by contractor without any extra cost. |
| 46 | (a) Angular contact bearing |
| 47 | (b) Line bush (UBH & LBH) Gun metal |
| 48 | (c) Lock nut S.S |
| 49 | (d) Impeller CI |
| 50 | (e) Line shaft SS |
| 51 | Supply and fixing in repairs MS lamella clarifier of existing size and shape with lamella settler suitable for 200 LPD STP duly painted with synthetic enamel paint for protection in existinng tank including all connected items for smooth operation & taking down the old unserviceable complete all as specified and directed |
| 52 | M & L filling Cultured Bacteria in liquid or powder form used to degrade organic compounds for sewage decomposition complete all as specified and directed. |
| 53 | M & L refilling plastic media in MBBR tanks made up of polypropylene, cylindrical in shape with 80% void to generate bio film in STP including replacing old complete all as specified and directed. |
| 54 | M & L for removing existing blower pump of capacity 250 m3/hr @ 0.37 Kg/cm2.& 7.5 HP motor from base frame after disconnecting pipelines lines for overhauling by cleaning the inlet air vent by replacing filters, bearings, gears, lobes etc required for smooth functioning of motor & pump and reassembling back after paintning and fixing back to original position and testing, commissioning etc complete all as specifeid and directedNote : (i) If any part required for overhauling is deemed to be included in the quoted rate.(ii) Spray painting will carried out before |
| 55 | Supply only Calcium based High strength Chlorination chemical, Make - Purichlor/Altoc GP contains chlorine contents not less than 65% with water in proportionate way for maintaining adequate chlorine at all time at Pump Houses as directed by competent authority for water Disinfection complete all as specifed & as Directed. Make : Aquafit / ALTOCH GP/Chlorotech-90, |
| 56 | M&L for Lifting and lowering of mono block/ submersible pump & motor from open well/sump of any capacity with the help of chain pully including sporting chain ,clamp, nuts and bolts for repair and disconnecting connection and reassembling back etcall as directed Note :One lifting, and one lowering should be measured as one job. |
| 57 | M & L for removing non clogging sewage submersible pump set 7.5/10 HP from well after disconnecting suction & delivery lines for repairing after cleaning, derusting, and replacment of minor spares i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer, machining etc. reassembling & lowering the pump back to its original position testing and commissioning complete all as speicfied and directed.Notes :- (1) Replacement of major parts will be measured & paid separately; (2) Any minor part like nuts & bolts, stud, transportation if required will be provided by contractor without any extra cost. |
| 58 | (a) Suction Bush |
| 59 | (b) Stage Casing Bush |
| 60 | (c) Shaft |
| 61 | (d) Sleevs |
| 62 | (e) Impeller |
| 63 | (f) NRV |
| 64 | (g) Sort piece with flange |
| 65 | (h) Diffuser |
| 66 | (i) Pump Bearing |
| 67 | (j) Motor Bearing |
| 68 | Supply and fixing in repairs fine bar SS Screen not less than 1.5 m x 1.o mtr or existing size in RCC chamber of tank complete all as directed & specified. |
| 69 | Supply & laying GI tubing medium grade galvanised with all fittings ( Tee, socket, elbow, long bend, reducer socket) laid on wall/floor/roof etc including flanges & welding complete all as specifed and as directed for the following bores |
| 70 | (a) 100mm bore |
| 71 | (b) 80mm bore |
| 72 | (c ) 50mm bore |
| 73 | Supply, laying and Jointing in trenches DI pipes 100mm class K-9 ISI marked of standard length spigot and socketed end push type joint with and including rubber gasket as jointing material, internal cement morter coating and external surface with bituminious paint complete all as specified & directed. |
| 74 | M & L for Relaying existing DI pipes of size 80 mm Bore (dia) obtained from above item including jointing material like gasket or lead in New or Old Position complete all as specified and as directed. |
| 75 | Supply, laying and Jointing in trenches DI pipes 80mm class K-9 ISI marked of standard length spigot and socketed end push type joint with and including rubber gasket as jointing material, internal cement morter coating and external surface with bituminious paint complete all as specified & directed. |
| 76 | S&F CI sluice valve (class PN 1.6) 150mm bore ISI marked with SS spindle both ends flanged, iron wheel with necessary size of gaskets nuts, both washer etc complete including taking down the unserviceable all as specifed & directed, Make : Upadhayay/Kalpana/ any ISI mark |
| 77 | S&F CI sluice valve (class PN 1.6) 100mm bore ISI marked with SS spindle both ends flanged, iron wheel with necessary size of gaskets nuts, both washer etc complete including taking down the unserviceable all as specifed & directed, Make : Upadhayay/Kalpana/ any ISI mark |
| 78 | All as per item No. 26 here in before but for 80mm bore all as specified and directed including taking out u/s oneMake : Upadhayay/Kalpana/ any ISI mark |
| 79 | S&F cast iron Non return valve double flanged (class-'B) high pressure conforming to IS-5312 150 mm bore complete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one all as directed & specified , Make : Kirloskar/leader/Venus |
| 80 | All as per item No. 28 here in before but for 100mm bore all as specified and directed including taking out u/s. |
| 81 | Cutting drilling & tapping of existing CI/DI pipe line by necessary tools with out damaging the pipe line as required upto 150mm dia complete all as specified. |
| 82 | S&F CI/ DI bends of any type radius & angle, tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc for spigot and socketed fitting upto size 150mm after taking out old UNSV one complete all as specified and as direcred. |
| 83 | S&F CI/ DI bends of any type radius & angle, tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc for flanged fitting upto size 150mm after taking out old UNSV one complete all as specified and as direcred. |
| 84 | S&F butter fly valve double flanged (class-'B) high pressure conforming to IS-5312, 100 mm bore complete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one complete all as directed & specified |
| 85 | S&F butter fly valve double flanged (class-'B) high pressure conforming to IS-5312, 80 mm bore complete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one complete all as directed & specified |
| 86 | S&F butter fly valve double flanged (class-'B) high pressure conforming to IS-5312, 50 mm bore complete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one complete all as directed & specified , Make : Kirloskar/leader/Venus |
| 87 | Material and Labour for rewinding of submersible electric motor AC 3 phase 415 volts 50 HZ by dismantling of burnt motor, cutting and taking out burnt stator winding from motor, cleaning the stator and rewinding with super enamelled water proof copper wire of original gauge/size and replacement of bush bearing etc to make fully functional including painting, testing & commissioning complete all as specified and directed. |
| 88 | M & L for removing existing 0.75 HP pump set from base frame after disconnecting suction & delivery lines replacing all bearings, gland bush, overhauling etc including all required items, rewinding with super enameled copper winding wire of original gauge / size complete and reassembling and fixing back to original position and testing, commissioning etc complete all as directed :- |
| 89 | M & L for repair of pump panel board by disconnecting the electrical connections and transporting to workshop for taking out old unserviceable wires, busbars & accessories, cleaning with blower, removing existing paint, preparaing the panel for repair for body damges, painting and rewiring with same size solid copper wire, replacement of colour coded insulated bus bar of size 150 Amps -04 Nos on insulators, replacement of nut & bolts with washers and other accesories like MCCB, meters, starter, reinstalling back to its original position, testing and commisioning complete all as specified & directed Note: Any other Electrical fittings connecting to panel board should be measured and paid separately. |
| 90 | S&F Fully automatic star delta starter with steel enclosure AC 3 phase, 415 volt 50 Hz, power contactors, relay range 9-15 Amps, bimetallic overload relay, single phase preventor suitable for 7.5/10 HP pump motor set fixing on existing LT panel board complete all as specified and as directed. |
| 91 | Supply and fix in replacement Contactor ML-2, 32A capacity, 2NO + 2NC, 415 V ratings complete all as directed |
| 92 | S&F in replacement CT Coil of 100/5 complete all as specified and as directed |
| 93 | Supply and fixing in repairs, bi-metallic overload relay mounted on the contactor with current carrying capacity ranging from 13-21 A complete all as specified and as directed. |
| 94 | S & F in repairs Single phase preventer and connected to existing strater suitable for 3 phase pump set of any capacity complete all as specified and directed |
| 95 | S&F in repairs Voltmeter meter, digital type, 0-500 Amps with in-built selector switchin existing panel complete of size 96 x 96 mm including taking down of old UNSV complete all as specified. |
| 96 | S&F Ampere meter, digital type, 0-500 Amps with in-built selector switch, complete with suitable size of CT's, size 96 x 96 mm including taking down of old UNSV complete all as specified. |
| 97 | S&F Indicator lamp, LED type of colour red, blue and yellow including taking down of old UNSV complete all as specified. |
| 98 | M&L for construction of valve pit chamber of size 1200 X 1200 X 900mm internal dimention using sub class-'B' bricks (1:6) plastering in cement mortar (1:4) externally & internally extended to 15CM below ground level incl pcc bed 10 cm in PCC 1:3:6 type C2 with MS frame fabricated by angle of size 50x40x6mm complete with top cover of 3mm ms sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of damaged valve pit and removing the demolished one not more than 50m from defence area all as specifed & directed. |
| 99 | M&L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strep 32x6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earth work GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc., connected to panel board as indicated including testing complete all as specified and as directed. |
| 100 | M & L for desilting / taking out accumulated sludge, Silt, Sand and Mud (cleaning with suitable chemical) etc. from sewage service/collection tank18 Metre long ,12.50 mtr width and 3.20 Metre deep installed near STP at Raspunja military camp complete all as specified and as directed. |
| 101 | M & L for cleaning the raw sewage sump with oil grease trap / MBBR tank (Primary & secondary) with inlet / treated water tank / tube settler tank by removing deposited mud silt along the wall & cleaning, washing etc. at the bottom of tanks & depositing the same to a distance not less than 150 mtr away from the installation complete all as specified and as directed. |
| 102 | M&L Opening of the first top cover from the sump of 50000 gallon capacity and pumping out all dirt water from sewage sump,Blocking the sewage line to sump providing jute bags at first manhole and cleaning the sump thoroughly with the help of wire brush after removing the sludge/silt and other foreign materials complete removing the blockage from sump complete of any capacity including removing the sludge from the pump house premises and depositing away from cantonment area |
| 103 | Materials and Labour Cutting / Horizontal boreing of existing road / path , hardstanding etc for passing cable, water pipe and making good the disturbed road top surfaces with filling cement concrete (1:3:6) type C-2 upto a suitable depth and finished complete all as directed. |
| 104 | Supply and laying GI pipe light grade with all fittings in trenches 150mm bore of GI pipe complete all as specified and as directed. |
| 105 | S&F UPVC pipes of pressure rating 10 KGA per CM2 of dia 50 mm with all tube fittings (such as bend, elbows, tees, short pieces) of medium grade, connectors, back nuts, caps , plugs and unions etc) laying in trenches/floor/ducts and also cutting pipes, screwing and for making bends on piping as required including taking up/down old pipe, complete all as specified and directed. |
| 106 | Supply and laying UPVC pipes of pressure rating 10 KGA per CM2 of dia 40mm with all tube fittings (such as bend, elbows, tees, short pieces of medium grade, connectors, back nuts, caps , plugs and unions etc) laying in trenches/floor/ducts and also cutting pipes, screwing and for making bends on piping as required including taking up/down old pipe and complete all as specified and directed |
| 107 | Supply and fix in replacement 18'X18' Hydrolic filter press with 17 Nos plate installed on PCC founadation of suitable size as recommended by OEM including dismantling old complete all as specified and directed. |
| 108 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge.Note:- Thickness after punning down shall be measured for payment. |
| 109 | Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed. |
| 110 | Laying in trenches Bricks, retrieved from demolition laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed. |
| 111 | Taking out the old unserviceable LT underground cable of any size & any description 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors from trenches/wall/floor/road/ culverts or pole etc including brick cover complete all as specified and directed.Note : Excavation and earth work, shall be measured & paid for separately under relevant items of BoQ. |
| 112 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 185 Sqmm 4.0 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed. |
| 113 | Supply and fixing LED fittings with lamps of 35 watts for bldg security light IP 66 power Coated pressure die cast aluminium compact high power LED street light with compact size & rough design 32 mm GI Bend complete all as specified and as directed. inclduing taking down old one as specified as directed. |
| 114 | M & L for glow sign board alongwith joy pipe bracket, accessories and supply and fixed 0.20mm thick white rubber coated vinyl or synthetic vinyl 1 sheet painted with scotch/computer inject printing with out door ink and with 300x720 DPI and also 140 DPI laminated with average 0.15mm high quality weather protected with chemical and including 1.5mm thick poly carbonated PVC milky/transparent sheet drawing art work computer designing including 22 SWG sheet frame work arrangement for fixing LED tube light fittings 1 no/sqm incl connection with 1.5 sqmm single core copper conductor cable and 50mm dia light grade pipe 3 RM x 2 nos duly grouted in ground 0.8 m deep in PCC/ fixing on top of the gate incl all arrangement & T&P required and testing complete all as specified and as directed. |
| 115 | Supply & fix in replacement MCCB 250 Amp, 4 pole, 36 KA,415V adjustable thermal and fixed magnetic type,Ics=100%,Icu” including making arrangement for cutting or welding, painting in existing panel if required complete with spreader terminals (legs) and with proper lugs complete all as specified and as directed. |
| 116 | Supply & fix in replacement MCCB 200 Amp, 4 pole, 36 KA,415V adjustable thermal and fixed magnetic type,Ics=100%,Icu” including making arrangement for cutting or welding, painting in existing panel if required complete with spreader terminals (legs) and with proper lugs complete all as specified and as directed. |
| 117 | Supply & fix in replacement MCCB 160 Amp, 4 pole, 36 KA,415V adjustable thermal and fixed magnetic type,Ics=100%,Icu” including making arrangement for cutting or welding, painting in existing panel if required complete with spreader terminals (legs) and with proper lugs complete all as specified and as directed. |
| 118 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation base of Old poles / old pannel other similar locations all as specified & directed including demoltion of old PCC/broken PCC |
| 119 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate with and including all necessary form work complete all as specified & directed.including demoltion of old PCC/broken PCC complete |
| 120 | M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form work and finishing with plastering complete all as specified & directedincluding demoltion of old PCC/broken PCC. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender