Tender For Special Repair To 04 X Bathroom In Building No P-81 (Otm Accn) Under Age B/R-I At Mil Stn Yol
Tender Value
28 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To 04 X Bathroom In Building No P-81 (Otm Accn) Under Age B/R-I At Mil Stn Yol
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Aug-2026 | Corrigendum1 | BOQ | 05-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete. |
| 2 | S&F for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified |
| 3 | M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, complete all as specied and as directed |
| 4 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed. |
| 5 | Dismantling of Factory made PVC cubical partition complete all as directed. |
| 6 | Factory casted 12 mm High Pressure Laminated (HPL) sheet certified to IS-2046 for toilet and shower room partition with approved design and shade by Engr-in-charge; comprising of good quality and high pressure resistance with proper resistance from scratch, abrasion, heat, chemical, impact and moisture resistance along with anti-bacterial resitsance complete all as specified and directed. |
| 7 | Factory made stainless steel hardware set comprising of :- Spring Loaded auto Closed Hinges 3 No., (SS 304) - Coat Hook Cum Door Stopper 1 No., ( SS 304)- Lock cum privacy indicator 1 No., (SS 304)- Round Door Knob 1Pair, (SS 304)- Adjustable Leg height 120mm to 150mm 1 No., (SS 316)- Screw- Rubber and all accesories reqd to make cubicle partition. Note:The hardware quality,size and grade shall be approved by Engineer-in-Charge and of stainless steel grade of certified warranty. Make \\"SUPERFIT/GODREJ/HITACHI\\". |
| 8 | S&F SS Finish chromium plated top rail of suitable length having section 50 x 32mm or other size to receive 12 mm thick HPL sheet well fitted and make proper finish with the help of screws, adhesives supported by walls or clamps complete all as specified and directed. |
| 9 | S&F SS Finish chromium plated U shaped rail of suitable length having section 25mm x 16mm or other size to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. |
| 10 | S&F SS Finish Anodize Chromium plated door stopper /H type channel section of suitable length having section 20mm x 12.5 mm or other to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. |
| 11 | S&F SS Finish chromium plated 90' sectionor F channel section or other for corners of suitable length having section 20mm x 12.5 mm or other to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. |
| 12 | Mild steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-w, Gde-E-250 quality-A, complete all as specified and directed. |
| 13 | Mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6, Type C1 (using 20mm graded crushed stone aggregate) nominal mix as in holdfast etc, complete all as specied and as directed |
| 15 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged and glazed skelton shutter (double shutter) ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window.(ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf.(iii) MS tower bolt 150mm long - 2 No per leaf(iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf.(vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf.(vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed |
| 17 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 18 | S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with finned tacks of galvanised wire staple fixed with stainless steel wire staples, complete all as specified. |
| 19 | S&F for 75mm size butt hinges medium weight , cold rolled MS and fixed complete all as specified and directed. |
| 20 | S&F for 150 mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed. |
| 21 | S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed. |
| 22 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed. |
| 23 | S&F 2nd class hardwood Plain, solid, straight, cupboard chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 24 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination, fixed with screws to timber frame work and wall complete all as specified and directed. |
| 25 | S&F for Extra over rates of block board or veneered particle board for 18/19 thick external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed. |
| 26 | S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 40mm, complete all as specified. |
| 27 | S&F 75mm size Extruded aluminium alloy handles, fabricated type, anodised, decorative type, fixed to shutter complete complete all as specified and directed. |
| 28 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, complete all as specified. |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 31 | Non-skid Mat finish coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | M&L for Glazed ceramic, premium quality, coloured/ printed tiles 350mm x 250mm/ 450mm x 350mm/ 300 x 450 x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 33 | Demolition of stone slabs/tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 34 | M&L for Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase complete, all as specified. |
| 35 | Polishing of existing laid kota stone and surface like mirror finish complete all as specified and directed. |
| 36 | M&L for Plain cement concrete M-10, nominal mix, type C-2, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved). |
| 37 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for sunken portion including removal of debris to a distance exc 1.5 Km but n exc. 2 Km, complete all as specified. |
| 38 | Broken brick bats for loose filling in sunken floor slab of gauge 80 mm to 150 mm graded complete all as specified. |
| 39 | Plain cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floors, complete all as specified. |
| 40 | Water proofing treatment of sunken portion and roof treatment using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'E', high solid content component water based liquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.50 mm having solid content of more than 80 % elongation of 500 + (-) 50 % laid over reinforcing layer on non woven geotextile mesh of 40/50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and preparation of surface complete all as directed. |
| 41 | 25mm thick PCC 1:2:4, type B-1 (Using 20 mm graded crushed stone aggregate) for sunken portion complete all as specified and directed. |
| 42 | S&F for 32 mm dia, 450 mm long, galvanised iron, medium grade pipe as in spout of sunken floor all as specified and directed. |
| 43 | Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 44 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 45 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. fair finished flat surface complete all as specified & directed. |
| 46 | M&L for reinforced cement concrete type B1, 1:2:4 (20 mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; complete all as specified and directed. |
| 47 | M& L 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking or WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. Note: The size,shade and design will be approved by GE. |
| 48 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed. |
| 49 | S&F for Pre- painted galvalume aluminum zinc (AZ-150) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 50 | Dismantling PVC drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings all as specified and directed. |
| 51 | S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed. |
| 52 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified. |
| 53 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or floors of bore 75 mm, laid in repairs complete, all as specified. |
| 54 | S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete, all as specified. |
| 55 | S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified. |
| 56 | S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified. |
| 57 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. |
| 58 | S&F for 110 mm PVC (SWR) vent cowl complete, all as specified. |
| 59 | S&F for Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down of old tank, all as specified. |
| 60 | S&F in repair Vitreous china wash basin, white, corner or flat of size 450 X 300mm or any suitable size as directed by Engr-in-charge and excluding taps, waste, chain and plug and pocelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as directed |
| 61 | Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified |
| 62 | Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supply & fixing automatic flushing cistern 5 litre with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as directed. |
| 63 | Granite stone slab, 18mm thick, of approved shade, table rubbed, edges rounded and polished on both sides; fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 6 mm nominal size) complete all as directed by Engineer-in-Charge. |
| 64 | 15mm Push tap button cast copper alloy, chromium plated, fancy type screwed for iron pipe and fixed, suitable for urinals (Minimum weight 15mm-50gms) complete all as directed by Engineer-in-Charge. |
| 65 | S&F of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specfied |
| 66 | S&F of 32 mm dia Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms ) complete all as specified. |
| 67 | S&F of 32 mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms ) in repairs complete all as specified. |
| 68 | S&F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) , complete all as specified |
| 69 | Pillar tap with long extension body with provision of hot & cold water lever operated having long braided hoses pipe with PVC Connection of length 450mm screwed down for iron pipe 15mm bore and fixed complete all as specified and directed., all as specified and directed. |
| 70 | S&F for angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. |
| 71 | S&F for Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. |
| 72 | Bath and shower CP mixer 3 in 1 for mixing hot & cold water water with provision for overhead shower area with Long bend pipe on upper side with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified. |
| 74 | S&F Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including fixing of plastic water closet seat cover, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device with CP Jet Spray etc. complete all as specified.(Note: All fittings required for operation are covered in this item). |
| 75 | Supply only PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. |
| 76 | S&F for 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified. |
| 77 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified. |
| 78 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screw, complete all as specified. |
| 79 | S&F for Brass chromium plated tubular towel rail 20 mm dia, \\"D\\" type, 60 cms long between flanges fixed with and including chromium plated brass brackets, brass screws complete all as specified |
| 80 | S&F in repair Polyethylene and unplasticised PVC pipe 32 mm bore low density polyethylene (LPDE) pipes of pressure rating 6 kgf/sq. cm, complete all as specified. |
| 81 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 82 | M&L for 15mm thick rendering on fair faces to brick work surface in CM 1:6 finished the surface even and smooth without using extra cement on internal wall surface, complete all as specified. |
| 83 | M&L for 15mm thick rendering on other than fair faces to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth without using extra cement on external wall surface with water proofing compound, complete all as specified. |
| 84 | Supply only integral water proofing compound |
| 85 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces/ceiling surfaces, finished surface evan and smooth without using etra cement complete all as specified & directed. |
| 86 | M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 87 | M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint oil bound distemper over a coat of alkali based primer complete all as specified and directed. |
| 88 | M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 89 | Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. and also applying one coat of anti corrision paint to visible reinforcement if any. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick rendering in two layers using shot gun or pressure nozzle or manually well bonded with surface (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc complete all as specified and directed. |
| 90 | Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specified . |
| 91 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 92 | G I tubing medium grade of 32mm bore with all fittings fixed as over flow pipe complete all as specified and directed |
| 93 | Demolition of stone/boulders or brick masonary built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. |
| 94 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 95 | M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1: 4 complete all as specified and directed. |
| 96 | Rolled mils steel works as in framing for cladding, glazing and staging for existing water tanks and the like fixed with angle cleats and connecting plates, etc. complete all as specified and as directed. |
| 97 | Disconnecting existing tanks any, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including repairing cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required complete all as specified. |
| 98 | 50mm thick, PCC 1:2:4 Type B0 (Using 12.5mm graded crushed stone aggregate) for padding in floors; finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 99 | Preparation of new steel surfaces and applying two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified. |
| 100 | Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified. |
| 101 | Complete removal of existing plaster & treatment including raking out joints etc;. Rendering the surface with 15mm thick cement plaster in CM 1:4, finished the surface even and smooth without using extra cement and applying water proofing of exterior surfaces by applying two coats of acrylic polymer modified high performance coating ( Smartcare Ultra Block 2K). The treatment shall be done from ground level complete all as specified and directed.Note : All treatment shall be done by authorised OEM with the help of mechanical means.Make : ''ASIAN PAINTS/BERGER/NEROLAC'' |
| 102 | Demolition of existing treatment on roof slab, taking down cement plaster including existing tarfelt from roof, preparation of old roof surfaces by brushing with wire brushes for removing caked etc; sweeping with brooms and finally fanning the cleaned surface to remove all loose dirt etc. on roof and applying the following :-(i) 15mm thick rendering in CM 1:4 mixed with WPC @ as per manufacturers instructions, the surface shall be finished even & smooth without using extra cement. Note:- WPC shall be measured and paid separately as supply only.(ii) FIRST COURSE : One coat of bitumen primer confirming to IS -3384 @ 0.40 Kg/Sqm.(iii) SECOND COURSE : One coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/sqm. (iii) THIRD COURSE : A layer of APP modified polymeric membrane, Centre core of 100 mm micron HMHDPE, outer film 20 micron each, thickness 3mm, minimum weight of water proofing membrane shall be 3 Kg per Sqm, complete all as specified and directed. |
| 103 | Preparetion of newly APP membrane surface and applying one coat of aluminium paint over APP membrance, complete all as specified. |
| 104 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 105 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 106 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender