Tender For Construction Of 2Nos D Type Quarter At Phc Building At Ambajhari 2026-27
Tender Value
66.27 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
11 days left
EMD
66270
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Boudh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2Nos D Type Quarter At Phc Building At Ambajhari 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in hard soil in embankments roads etc. within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying I llayers not exceeding 0.3m in depth and compaction with PRR including hire and running charges of PRR etc. complete as per specification and direction of the Engineer-in-charge. |
| 2 | Providing filling good clean river sand of approved quality including watering to complete saturation ramming complete including cost conveyance, royalty, additional charges, DMF 10 PERCNT EMF 5 PERCNT over royalty Cess taxes of all materials cost of all labour TP required for the work etc complete as per specification direction of Engineer in Charge. |
| 3 | Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground leveL bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10PERCNT EMF 5PERCNT over royalty taxes of all materials etc. with all labour and T P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer in charge |
| 4 | Cement concrete proportion (1:2:4) with hard black broken granite chips of 12mm size clean hard black and broken granite metal of approved quality from approved quarry including hoisting lowering and laying concrete including shuttering centering and finishing the exposed surface smooth including watering curing with all cost conveyance royality and taxes labour T P articles required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Footing |
| 6 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Column |
| 7 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Plinth Beam |
| 8 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Lintel |
| 9 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Chajja |
| 10 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Shelves |
| 11 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Roof beam |
| 12 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Roof Slab |
| 13 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Staircase |
| 14 | Supplying fitting fixing placing uncoated HYSD bar reinforcement for R.C.C. work including cutting, bending and tying grills and placing in position including cost, conveyance of rods and binding wires etc.complete as per drawings etc. complete as per direction of the Engineer-in-charge. |
| 15 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10 percnt EMF 5 percnt over royalty taxes of all materials etc, cess with T P required for the work with all taxes and royalties etc. with all T P complete in all respect as per direction of the Engineer in charge. |
| 16 | Flyash brick masonary in cement mortar (1:6) in superstructure with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10 percnt EMF 5 percnt over royalty taxes of all materials etc, cess with T P required for the work with all taxes and royalties etc. with all T P complete in all respect as per direction of the Engineer in charge. |
| 17 | 16mm thick cement plaster (1:6) finished smooth to inside surface of bricks walls stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge |
| 18 | 12mm thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 19 | Supplying,fitting and fixing of M.S. Window grill gate confirming painted with Red Oxide Primer as per design including cost of all materials with cost of conveyance, taxes, Cess etc. as per direction of Engineer-in-Charge. |
| 20 | Supplying, fitting fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters all fittings fixtures. |
| 21 | Supplying, fitting fixing of Openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters all fittings fixtures. |
| 22 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame section No. 4095, 4096, 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including llocking arrangement including all fitting including cost of materials all taxes labour, T P etc. complete as per direction of Engineer-in-charge. |
| 23 | Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32x32x2mm at 0.90Mtr. C C and stainless square pipe bracing of size 32x32x2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc. with cost, conveyance, taxes of all materials, labour T P etc. required for the work as per direction of the Engineer-in-charge. |
| 24 | Supplying, fitting and fixing Chequered tiles, in floor and wall tiles of approved make with application of polymer modified cement based water resistant adhesive bet of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, takes labour T P etc. complete as per specification and direction of the Engineer-in-charge |
| 25 | Providing, fitting and fixing of 8 mm to 12 mm thick matte vitrified tile of size (600 x 600mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in floowing in all floors at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. |
| 26 | Providing, fitting and fixing of 8 mm to 12 mm thick matte vitrified tile of size (600 x 600mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in dados at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. |
| 27 | Providing, fitting and fixing of antiskid tile in floor of step tread and riser of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in KITCHEN of C.M. (1:1) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. |
| 28 | Painting one coats with any approved water bound cement primer paint and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. |
| 29 | Finishing surface of wall with Acrylic putty (water based) of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. |
| 30 | Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of of labour T P etc. complete as per specification aid direction of the Engineer-in-charge. |
| 31 | Finishing of two coat on surface of wall with weather coat of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. |
| 32 | Painting of two coat enamel paint of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. |
| 33 | Cement concrete proportion (1:2:4) with hard black broken granite chips of 12mm size clean hard black and broken granite metal of approved quality from approved quarry including hoisting lowering and laying concrete including shuttering centering and finishing the exposed surface smooth including watering curing with all cost conveyance royality and taxes labour T P articles required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 34 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Column FIRST FLOOR |
| 35 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Lintel FIRST FLOOR |
| 36 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Chajja |
| 37 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Shelves FIRST FLOOR |
| 38 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. rOOF BEAM FIRST FLOOR |
| 39 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. rOOF SLAB FIRST FLOOR |
| 40 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. STAIRCASE FIRST FLOOR |
| 41 | Supplying fitting fixing placing uncoated HYSD bar reinforcement for R.C.C. work including cutting, bending and tying grills and placing in position including cost, conveyance of rods and binding wires etc.complete as per drawings etc. complete as per direction of the Engineer-in-charge. FIRST FLOOR |
| 42 | Flyash brick masonary in cement mortar (1:6) in superstructure with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10 percnt EMF 5 percnt over royalty taxes of all materials etc, cess with T P required for the work with all taxes and royalties etc. with all T P complete in all respect as per direction of the Engineer in charge. FIRST FLOOR |
| 43 | 16mm thick cement plaster (1:6) finished smooth to inside surface of bricks walls stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge FIRST FLOOR |
| 44 | 12mm thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge. FIRST FLOOR |
| 45 | 20mm thick cement grading plaster (1:4) finished smooth including watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge FIRST FLOOR |
| 46 | Painting one coats with any approved water bound cement primer paint and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. FIRST FLOOR |
| 47 | Finishing surface of wall with Acrylic putty (water based) of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge FIRST FLOOR |
| 48 | Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of of labour T P etc. complete as per specification aid direction of the Engineer-in-charge. FIRST FLOOR |
| 49 | Finishing of two coat on surface of wall with weather coat of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. FIRST FLOOR |
| 50 | Painting of two coat enamel paint of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. FIRST FLOOR |
| 51 | Providing, fitting and fixing of 8 mm to 12 mm thick matte vitrified tile of size (600 x 600mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in floowing in all floors at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. FIRST FLOOR |
| 52 | Providing, fitting and fixing of 8 mm to 12 mm thick matte vitrified tile of size (600 x 600mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in dados at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. FIRST FLOOR |
| 53 | Providing, fitting and fixing of antiskid tile in floor of step tread and riser of printed series confirming to IS specification having minimum breaking strength 1400 kg per Sq.cm in KITCHEN of C.M. (1:1) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials labour T P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. FIRST FLOOR |
| 54 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Lintel HEAD ROOM |
| 55 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Chajja HEAD ROOM |
| 56 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. rOOF BEAM HEAD ROOM |
| 57 | R.C.C. work M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10 PERCENT EMF 5 percent over royalty taxes of all materials etc, cess with T P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. rOOF SLAB HEAD ROOM |
| 58 | Flyash brick masonary in cement mortar (1:6) in superstructure with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10 percnt EMF 5 percnt over royalty taxes of all materials etc, cess with T P required for the work with all taxes and royalties etc. with all T P complete in all respect as per direction of the Engineer in charge. HEAD ROOM |
| 59 | 16mm thick cement plaster (1:6) finished smooth to inside surface of bricks walls stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge HEAD ROOM |
| 60 | 12mm thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge. HEAD ROOM |
| 61 | 20mm thick cement grading plaster (1:4) finished smooth including watering and curing with cost and conveyance of all materials and labour, cess with T P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge HEAD ROOM |
| 62 | Painting one coats with any approved water bound cement primer paint and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. HEAD ROOM |
| 63 | Finishing surface of wall with Acrylic putty (water based) of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge HEAD ROOM |
| 64 | Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of of labour T P etc. complete as per specification aid direction of the Engineer-in-charge. HEAD ROOM |
| 65 | Finishing of two coat on surface of wall with weather coat of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. HEAD ROOM |
| 66 | Painting of two coat enamel paint of approved make with cost conveyance and taxes of all materials and labour with TP required for the work etc., complete in all respect as per direction of the Engineer-in-charge. HEAD ROOM |
| 67 | Recessed wiring to light point fan point exhaust fan point call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group A (1.1.1) |
| 68 | Recessed wiring to light point fan point exhaust fan point call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group B (1.1.2) |
| 69 | Recessed wiring to light point fan point exhaust fan point call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group C (1.1.3) |
| 70 | S F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base cover (1.24.2) |
| 71 | S F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base cover in front including cutting the wall and making good the same in case of recessed conduit as required.4 Modular box with base cover (1.24.3) |
| 72 | S F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base cover in front including cutting the wall and making good the same in case of recessed conduit as required.8 Modular box with base cover (1.24.5) |
| 73 | S F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base cover in front including cutting the wall and making good the same in case of recessed conduit as required.12 Modular box with base cover (1.24.6) |
| 74 | S F of 5A. Modular Switch 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 75 | S F of extension board of 4 modular Metal box with modular base cover in recess including providing and fixing of 3pin 5 6amp modular socket out let 5 6 amp piano type modular switch, connection, painting etc as required. (1.25.1+1.25.4)+4 MODULE BOX |
| 76 | S F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5 6 amp. Modular Socket out let 5 6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 77 | S F of Power point with 4 modular metal box with modular base cover in recess including providing and fixing of 5 pin 15 16 amp. piano type Modular switch Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 78 | S F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator |
| 79 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694 1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 80 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694 1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required 2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 81 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694 1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 82 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694 1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required 2x6sqmm +1x2.5sqmm ( 1.8.4 ) |
| 83 | Supply, Installation testing and commissioning of 63 Amp. ICDP Main Switches (IS13940 part 3 1993) with supply of metal box of following capacity on existing surface Wall mounting complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (2.15.a) |
| 84 | 250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICDP Main switch. |
| 85 | S Fof B series SP MCB of 5A to 32 Amp rating 240Volt B series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 86 | S F of following 8way single door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.2 |
| 87 | S F of Call bell/ Buzzer ISI marked sutiable for DC AC single Phase 230 volts complete as required.(1.30) |
| 88 | S F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (1.29-1.28) |
| 89 | Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2) |
| 90 | Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17) |
| 91 | S F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator |
| 92 | S F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38) |
| 93 | S F of Fan hok S type made of 16mm MS rod as per specificationn |
| 94 | Supply, Installation, Testing and commissioning of 10W LED bulkhead fittings |
| 95 | S F of 30-35 wt. LED St. Light fitting with LED Electronic driver with all accessories connection |
| 96 | S F of 18 25 watt LED Tube light fitting compoete with all connection. including fixing and all accessories as per direction of Engineer-In-charge |
| 97 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb |
| 98 | S F of 15A modular socket on 2 Modular Metal box for A.C |
| 99 | S F of 32A C series D.P. MCB for A.C |
| 100 | S F of 25A Moter Starter switch for A.C |
| 101 | S F of 300 Exhaust fan with all accessoriesand connections |
| 102 | wiring to sub main with 1x1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm) |
| 103 | S F of 2000 VA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake Luminous Exide) |
| 104 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (a)110mm dia.U PVC SWR pipes |
| 105 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (b)110mm dia.U PVC P trap |
| 106 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (c)110mm dia.U PVC SWR Single junction door |
| 107 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (d)110mm dia.U-PVC SWR Offset |
| 108 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (e)110mm dia.U-PVC SWR plain bend |
| 109 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (f)110mm dia.U-PVC SWR Door bend |
| 110 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(g)110mm dia.U-PVC SWR vent cowl |
| 111 | Supplying all materials,labour,T P and fitting fixing of 4.0 kgf cm2 U PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (h)125mm dia CP greatings |
| 112 | Supplying all materials,labour,T P cutting holes through brick stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe fitting etc. all complete as per PH specification and direction of E.I.C.(a)250mm thick wall |
| 113 | Supplying all materials,labour,T P and fixing water closet,squatting pan (Indian type W.C pan Orissa pattern squatting pan) duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan |
| 114 | Supplying all materials,labour,T P and fixing wash down water closet(E.W.C)with integral S or P trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with P S trap plain |
| 115 | Supplying all materials,labour,T P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 116 | Supplying all materials,labour,T P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB |
| 117 | (b)Pedestrial for WHB |
| 118 | supplying all labour,T P materials fixing wash Kitcken Sink with CI MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C.(a)600mmx450mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets. |
| 119 | Supplying all materials,labour,T P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder |
| 120 | Supplying all materials,labour,T P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror |
| 121 | Supplying all materials,labour T P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf |
| 122 | Supplying all materials,labour,T P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail |
| 123 | (a)CP Towel Ring |
| 124 | Supplying all materials,labour T P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass PVC ball valve with polythene float,CP Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L L Cistern(Parry ware) |
| 125 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. |
| 126 | Supplying all materials,labour,T P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.(a)In Ground Floor |
| 127 | (b)In 1st Floor |
| 128 | Supplying all materials,labour,T P and fixing porcelain glazed tiles in dados skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(a)In Ground Floor |
| 129 | (b)In 1st Floor |
| 130 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.(a) Initial lift up to 1.50m |
| 131 | (b)From 1.5m to 3.00m depth |
| 132 | Supplying all materials labour T P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C. |
| 133 | Supplying all materials,labour,T P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C |
| 134 | Supplying all materials,labour,T P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 135 | Supplying all materials labour T P and providing brickwork with KB bricks having crushing strength not less than 75kg cm2 with dimensional tolerance 8 perct including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 136 | Supplying all materials,labour,T P and providing cement plaster on brick stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 137 | Supplying all materials labour T P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 138 | Supplying all materials labour T P and providing rigid and smooth centering shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 139 | Supplying all materials labour T P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 140 | Supplying all materials labour T P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 141 | Supplying all materials labour T P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 142 | Supplying all materials labour T P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 143 | Supplying all materials,labour,T P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 144 | Supplying all materials,labour,T P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. (a)Inside size760mm x760mm x 460mm |
| 145 | Supplying all materials,labour,T P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. (b)Construction of Gully Trap Chamber (0.25 x 0.25 inside Size) |
| 146 | Supplying all materials,labour,T P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. (c)Bore Protection Chamber |
| 147 | Supplying all materials, labour, T P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110 mm dia PVC pipe line (Haunch top) |
| 148 | Supplying all materials, labour, T P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.20m dia x 2.00m Deep (Inside Size) |
| 149 | Supplying all materials, labour, T P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)2000 lits capacity on the roof of 1st floor |
| 150 | Supplying all material,labour,T P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701 1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)2000 lits capacity on the roof of 1st floor |
| 151 | Supplying all materials,labour,T P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785 89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)32mm dia PVC(ASTM) pipe(Internal) |
| 152 | Supplying all materials,labour,T P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785 89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(b)25mm dia PVC(ASTM) pipe(Internal) |
| 153 | Supplying all materials,labour,T P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785 89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(c)25mm dia Outer dia C-PVC pipe(Internal) |
| 154 | Supplying all materials,labour,T P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785 89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(d)20mm dia Outer dia C-PVC pipe(Internal) |
| 155 | Supplying all materials,labour,T P and cutting holes for taking G.I PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 156 | (a)In 1st Floor |
| 157 | Supplying all materials,labour,T P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor |
| 158 | Supplying all materials,labour,T P and cutting grooves in pucca floor and walls for taking G.I PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 159 | (a)In 1st Floor |
| 160 | Supplying all materials,labour,T P and fixing brass CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C. (a)15mm dia CP SB Bib cock |
| 161 | (b)15mm dia CP(LB) Bib cock |
| 162 | (c)15mm dia CP Two way Bib cock |
| 163 | (d)15mm dia CP Angle stop cock |
| 164 | (e)15mm dia CP Pillar stop cock |
| 165 | (f)15mm dia CP Concealed stop cock |
| 166 | (g)15mm dia CP Revolving Shower with shower Arm |
| 167 | (h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 168 | (i)25mm dia U-PVC Ball Valve[Metal Ball] |
| 169 | (j)32mm dia U-PVC Ball Valve[Metal Ball] |
| 170 | (k)15mm dia CP Flange |
| 171 | Supplying all materials,labour,T P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800 2200Lit Hour a head-55 70mtr.of reputed make Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 172 | Supplying all materials,labour,T P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 173 | Supplying all materials,labour,T P and fitting fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 174 | Supplying all materials,labour,T P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company connecting the pump starter including cost conveyance taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 175 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend socket including all cost,taxes etc all complete as perdirection of the E.I.C. |
| 176 | Supplying fitting and fixing of HDPE Pipes pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 177 | Sinking of 125mmx100mm Size Bore Well Through DTH Method Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm 200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools plants and consumable etc. for lowering 125mm dia PVC GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard boulder formation(PCV GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No)(a)Drilling of 125mm. dia. Bore:- |
| 178 | Lowering the following G.I PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC G.I) supplied by the contractor (including cost of pipe)(a)Lowring of 125mm dia pipes 0.00mtr to 30.00mtr |
| 179 | (b)Cost of 125mm dia PVC casing pipes-0.00m to 30.60m |
| 180 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender