Tender For Repair/ Polishing Of Wooden Furniture And Re-Canning Of Different Types Of Chairs And Fixing Of Ply Top At Various Air Force Stn Under Bso Of Ge (Af) Gurgaon
Tender Value
48 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
15 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Polishing Of Wooden Furniture And Re-Canning Of Different Types Of Chairs And Fixing Of Ply Top At Various Air Force Stn Under Bso Of Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Chair Dining FD 279 & 1105Repair to chair Dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below. The entire chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks. All other work as specified and as directed by Engineer - in - Charge. |
| 2 | Front Leg |
| 3 | Rear Leg |
| 4 | Stiffner |
| 5 | Stiffner H type |
| 6 | Side and back rail with drill canning hole suitable for 2mm thick cane |
| 7 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 8 | Recaning of chair dining with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed |
| 9 | Bed Hard Ply Top ( Drg No FD-246)Repair to Bed hard ply top with repairs/replacement of the following components and the bed shall be set right and the entire bed shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper. |
| 10 | Removing unserviceable ply wood from outer sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed |
| 11 | Removing unserviceable ply wood from inner sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed |
| 12 | Removing unserviceable ply wood from outer sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed |
| 13 | Removing unserviceable ply wood from inner sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed |
| 14 | Replacement of top ply:-Removing unserviceable ply top from Bed Hard and S&F of new ply wood top shall be of 12mm thick BWR Grade face veneer on both side fixed with screws complete all as shown on drg and complete all as specified and as directed. Make: Greenply Duro or Archid with ISI Marked. |
| 15 | Replacement of legsTaking out unserviceable legs from Bed Hard and S&F new leg made out of 1st class hard wood teak as per existing shape and size as shown on drg complete all as specified and as directed |
| 16 | Replacement of Long Rails:Taking out unserviceable/broken long rails from Bed Hard and S&F new long rail as per existing shape and size made out of well seasoned teak wood free from knot and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed |
| 17 | Replacement of stiffner :Taking out broken stiffner and S&F new stiffner made out of teak wood as per existing shape, design and size all as shown on drg complete all as specified and as directed |
| 18 | Table 900x600x760mm with out drawer (Drg No. FD-223 & 284)Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 75x75mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. |
| 19 | Taking out unserviceable top, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg. |
| 20 | Taking out UNSV leg, supply and fixing of new leg of first class sheesham wood, as per Drg. |
| 21 | Taking out UNSV top long rail, supply and fixing of new top long of first class sheesham wood, as per Drg. |
| 22 | Taking out UNSV short rail, supply and fixing of new top short rail of first class sheesham wood, as per Drg. |
| 23 | Taking out unserviceable stiffener, supply and fixing of new \\"H\\" Type stiffener complete of first class sheesham wood, as per Drg. |
| 24 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 25 | Table Dining 6/8 Persons (Drg No. FD-273 & 239) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 100mmx100mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. |
| 26 | Taking out unserviceable top of table dining 6/8 pers, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 27 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 28 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 29 | Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 30 | Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 31 | Table dressing Ladies (Drg No. FD-251) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately. |
| 32 | Taking out unserviceable top table dressing Ladies and supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg. |
| 33 | Taking out unserviceable bottom of table dressing Ladies, supply and fixing of new bottom made out of 18/19 mm block board commercial BWR. Type exterior gde as per Drg. |
| 34 | Taking out unserviceable legs of talbe dressing ladies, supply and fixing of new legs made out of first class teak wood. |
| 35 | Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom with knob 25mm. Bottom shall be 6mm ply wood commercial. Front portion of drawer shall be made out of M.D.F board 18mm with anodize copper plated knob. |
| 36 | Supply of looking mirror 5mm thick superior quality make Saint Gobin/Modigaurd with teak wood frame and ply wood 6mm thick BWR quality on back complete as per Drg. |
| 37 | Taking out UNSV/broken sliding glass, Supply and fixing of new sliding glass shutter 5mm thick dully rounded edges complete as per Drg. |
| 38 | Taking out UNSV aluminium channel, Supply and fixing of new aluminium channel as per Drg. |
| 39 | Taking out back side ply wood and Supply and fixing of new ply wood BWR 12 mm as per Drg. |
| 40 | Table Center (Drg No. FD-274 & 235) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and the entire table shoud be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with Emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately. |
| 41 | Taking out unserviceable top of table centre, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 42 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 43 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 44 | Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 45 | Taking out unserviceable stiffener, supply and fixing of new \\"H\\" Type stiffener complete of first class teak wood, as per Drg. |
| 46 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 47 | Teapoy (Drg No. FD-278&232) Repair to teapoy including dismantling of old broken parts and replace with new parts as mentioned below. Teapoy shall be repolished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned here in after shall be measured and paid separately as supply only. |
| 48 | Taking out unserviceable top, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 49 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 50 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 51 | Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 52 | Taking out unserviceable stiffener, supply and fixing of new \\"H\\" Type stiffener complete of first class teak wood, as per Drg. |
| 53 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 54 | Peg Table (Drg No. FD-235) Taking out unserviceable top, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 55 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 56 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 57 | Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 58 | Taking out unserviceable stiffener , supply and fixing of new stiffener complete of first class hard wood teak as per Drg |
| 59 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 60 | The entire peg table shall be polished with French polish after replacement of above components. |
| 61 | Table Writing (Drg No. FD-275) Taking out unserviceable top of table writing, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 62 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 63 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 64 | Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 65 | Taking out unserviceable drawer, supply and fixing of new drawer of deodar wood except bottom. Which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood with anodize knob. |
| 66 | Taking out unserviceable cub board of table writing, supply and fixing of new cub board with shutter as per Drg. |
| 67 | Taking out unserviceable shutter, supply and fixing of new shutter of table writing made of pre-laminated particle board exterior grade 18mm as per grade. |
| 68 | Taking out unserviceable stiffener, supply and fixing of new stiffener complete of first class teak wood as per Drg. |
| 69 | Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage. |
| 70 | The entire table shall be polished with French polish after replacement of above components. |
| 71 | Hat Stand. Taking out unserviceable looking mirror of hat stand , supply and fixing of new mirror electro copper plated 5mm thick. |
| 72 | Taking out unserviceable peg of hat stand , supply and fixing of new peg CP brass 120x75mm as per Drg. |
| 73 | Polishing one coat to old and two coats to new surfaces to hat stand mirror with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 74 | M & L for replacement of Base made of 18/19mm thick Rosewood/Mahogany Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 6mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 75 | Table Dining 1200x900mm (Drg No.FD/MAP-II/03)Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be repolished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. |
| 76 | Taking out unserviceable top , supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 77 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 78 | Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 79 | Taking out UNSV top short rail, supply and fixing of new top long rail of first class teak wood, as per Drg. |
| 80 | Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage. |
| 81 | Chair computer FD/E6/MAP/01(All Type TP)Taking out unserviceable seat and back of chair computer, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with tapestry cloth as approved by Engr-in-charge complete all as specified and as directed. |
| 82 | Removing old unserviceable coaster wheel and S&F new coaster wheels of chair computer complete all as specified and as directed. |
| 83 | Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed. |
| 84 | Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed. |
| 85 | Removing old unserviceable handles and S&F new handles complete all as specified and as directed. |
| 86 | Removing old unserviceable Machanism Plate and S&F new Machnisum plate complete all as specified and as directed. |
| 87 | Table bed side Drg No. FD/E6/MAP/15 ( R) Taking out unserviceable top of table bed side, supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg. |
| 88 | Taking out unserviceable left/right sides of table bed side, supply and fixing of new right/left side of table bed side made out of pre-laminated particle board 18mm exterior grade. |
| 89 | Taking out unserviceable bottom of table bed side, supply and fixing of new bottom of made out of pre-laminated particle board 18mm exterior grade. |
| 90 | Taking out unserviceable partition of table bed side, supply and fixing of new partition of 6mm ply wood BWR as per Drg. |
| 91 | Taking out unserviceable handles of table bed side, supply and fixing of new handles superior quality as approved by Engr-in-charge. |
| 92 | Removing of old UNSV PVC Shoes, supply and fixing new PVC Shoes of best quality as per Drg. |
| 93 | Sofa Set 5 Seater (Drg No FD-373 and FD-281)Repair to sofa sets including dismantling of old back and seat cushions and replace with new back and seat cushions. 'Cool' Foam of 100mm thick 40 density shall be fixed on back and seat covered with tapestry cloth of superior quality as approved by GE, cost shall not be less than Rs 200/- per mtr. The size of the 'Cool' foam seat and back shall be 530mmx500mm of make Sleepwell or Kurlon. Wooden frame of sofa set shall be set right and polished after repair in original teak shade. The under mentioned unserviceable/broken parts/components of the Sofa set shall be taking out and supply and fixing new parts/components made out of well seasoned teak wood free from knots and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed.(Sleep well-Feather Foam & Kurlon - Goldline) |
| 94 | Long rail |
| 95 | Short rail |
| 96 | Rear leg |
| 97 | Handle/Arms |
| 98 | Chair Easy FD-229Repair to chair easy including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old existing polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed. |
| 99 | Front Leg |
| 100 | Rear leg |
| 101 | Stiffner |
| 102 | Side/back rail with duly drill holes for 2 mm caning |
| 103 | Recaning of chair easy with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed |
| 104 | Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage. |
| 105 | Dressing mirror FD/E6/MAP/16 Replacement of back ply with S&F new back ply made out of 12mm thick BWR Ply, made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge. Make :- Greenply, Model :- Green, Century, Model:- Maxima, Duro, Model :- Duromac, Archid, Model :- Archidply Premium/ Gold |
| 106 | Replacement of mirror with S&F new mirror of size 600mm x 1200mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge (make - Modi gurard/Saint Gobin) |
| 107 | 5.5mm thick glass shelves of size 600mm x100mm made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge (make - Modi gurard/Saint Gobin) |
| 108 | Polishing one coat to old and two coats to new surfaces to Mirror Dressing Gents (MAP) with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 109 | Chair Writing FD-280Repair to chair Writing including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and selling right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old exisiting polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed. |
| 110 | Front Leg |
| 111 | Rear leg |
| 112 | Stiffner |
| 113 | Side/back rail |
| 114 | Recaning of chair writing with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed |
| 115 | Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage. |
| 116 | Chair revolving with arms with cushion seat & back (High Back/ Med Back/ Low Back/TP/Godrej/Royal Koas) Taking out unserviceable seat and back of chair revolving, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with tapestry cloth as approved by GE complete all as specified and as directed. |
| 117 | Removing old unserviceable coaster wheel and S&F new coaster wheels of chair revolving complete all as specified and as directed. |
| 118 | Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed. |
| 119 | Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed. |
| 120 | Removing old unserviceable handles and S&F new handles complete all as specified and as directed. |
| 121 | Removing old unserviceable Machanism Plate and S&F new Machnisum plate complete all as specified and as directed. |
| 122 | Chair visitor with arms with cushion seat & back(TP/MAP/Royal Koas) Taking out unserviceable seat and back of chair Un-revolving with arm, supply and fixing of new seat and back 50mm thick foam cushion for seat, 25mm thick foam cushion for back covered with tapestry cloth as approved by GE complete all as specified and as directed. |
| 123 | Removing of unserviceable rubber shoes of Chairs, supply and fixing of new rubber shoes as per Drg complete all as specified and as directed. |
| 124 | Preparation of old painted surface of chair and apply one coat of synthetic enamel paint Black including denting and welding complete all as specified and as directed. |
| 125 | Removing old unserviceable handles and S&F new handles complete all as specified and as directed. |
| 126 | Table 900x600x760mm with drawer (Drg No.FD-224 & 283) Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. |
| 127 | Taking out unserviceable top of table 900x600x760mm with drawer, supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed. |
| 128 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 129 | Taking out UNSV top long rail, supply and fixing of new top long of first class teak wood, as per Drg. |
| 130 | Taking out UNSV short rail, supply and fixing of new top short rail of first class teak wood, as per Drg. |
| 131 | Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood |
| 132 | Taking out unserviceable stiffener, supply and fixing of new \\"H\\" Type stiffener complete of first class teak wood, as per Drg. |
| 133 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 134 | Table 900x900mmx760mm W/O drawerRepair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repolished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper. |
| 135 | Taking out unserviceable top , supply and fixing of new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hot pressing machine (colour shade as approved by GE) as per Drg complete all as specified and as directed.. |
| 136 | Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg. |
| 137 | Taking out UNSV top rail, supply and fixing of new top rail of first class teak wood, as per Drg. |
| 138 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 139 | Polishing of following wooden furniture with french polish (after removing existing polish and making good surface by scraping/cleaning) till glossy finish of best quality to the entire satisfaction of Engr-in-Charge |
| 140 | Book Case LP |
| 141 | Chair Dining |
| 142 | Chair Easy |
| 143 | Chair Writing |
| 144 | Sofa set 5 seater |
| 145 | Rifle Rack |
| 146 | Bin Linen Multipurpose |
| 147 | Table Dressing Ladies |
| 148 | Table Writing |
| 149 | Table One Piece All Purpose |
| 150 | Chair Dining JCO/OR FD/MAP-II/05Repair to chair dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and selling right all other existing parts. Removing of unsv PVC Seat of Chair Dining MAP and Supply and fixing of 12mm thick plywood with 50mm 40 density cushion duly covered with leather cloth as per approved by Eng-in-Charge, complete on the top of the seat of chair dining. Chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed . |
| 151 | Front Leg |
| 152 | Rear Leg |
| 153 | Stiffner |
| 154 | Stiffner H type |
| 155 | Nylone buffer |
| 156 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 157 | CHAIR SCHOOL WITH HARD BOARD : FD/E6/MAP/05 |
| 158 | S & F new seat and back (Blow plast) as per drg. |
| 159 | Replacement of old existing broken top of any description with S&F new top shall be made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick PVC edging shall be fixed on all sides of top with strong bonded chemical adhesive through hotpressure method and openable with PVC edging (Hinged on RHS) screwed to 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame as per drg. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make of MDF:-Century or equivalant as approved by GE). |
| 160 | S & F new MS bars at base tray with proper welding with frame of tray as shown in drg. |
| 161 | Replacement of rubber shoe with S & F new hard rubber shoe of superior quality. |
| 162 | Welding work wherever required as directed by EIC. |
| 163 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair school with hard board, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 164 | CHAIR CBT STEEL WITH ARMS/ WITHOUT ARMS : FD-75 (M) |
| 165 | Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seat made out of 12 mm thick Plywood Commercial Quality ISI mark covered with 75mm thick, 40 density PU form (Make- Sleepwell/Godrej/Kurlon) and best quality tapestry cloth of rate ranging Rs 250-300/- as well seat should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of black enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews completed all as shown on drg, specified & directed by the Engr-in- Charge. (Make of Ply :- Greenply/ Century/ Duro) |
| 166 | Replacement of Arms rest with S&F new Arms rest made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised all as shown on drgs specified & directed by the Engr-in- Charge. |
| 167 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 168 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the chair CBT steel with arms/without arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 169 | Chair Dining Officer :- FD/MAP-II/04Repair to chair Dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below. The entire chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks. All other work as specified and as directed by Engineer - in - Charge. |
| 170 | Front Leg |
| 171 | Rear Leg |
| 172 | Stiffner |
| 173 | Stiffner H type |
| 174 | Taking out unserviceable seat of chair dining officer, supply and fixing of new seat 50mm thick foam cushion and covered with tapestry cloth as approved by GE complete all as specified and as directed. |
| 175 | Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge. |
| 176 | Bin Linen Multipurpose :- FD/E6/MAP/09 Taking out unserviceable top of Bin Linen Multipurpose, supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade with 4mm teak wood edging shall be providing all round the expose edge of the board as per Drg. |
| 177 | Taking out unserviceable left/right sides of Bin Linen Multipurpose, supply and fixing of new right/left side of table bed side made out of pre-laminated particle board 18mm exterior grade. |
| 178 | Taking out unserviceable bottom of Bin Linen Multipurpose, supply and fixing of new bottom of made out of pre-laminated particle board 18mm exterior grade. |
| 179 | Taking out unserviceable back of Bin Linen Multipurpose, supply and fixing of new back of made out of 12mm commercial plywood as per ISI-303. |
| 180 | Taking out unserviceable handles of Bin Linen Multipurpose, supply and fixing of new handles superior quality as approved by Engr-in-charge. |
| 181 | Removing of old UNSV PVC Shoes, supply and fixing new PVC Shoes of best quality as per Drg. |
| 182 | Taking out unserviceable drawer, supply and fixing of new drawer of pre-laminated particle board 12mm exterior grade and shall be on telescopic channels of best quality as per Drg. |
| 183 | TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276 Dismantle, take out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. |
| 184 | Replacement of old existing broken table top of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 2mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 185 | Replacement of side of table bed side with S&F new sides with 12 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 2mm PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/GE. (Make:- Century or equivalant as approved by GE). |
| 186 | Replacement of shelf & bottom with S&F 12 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 2mm PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method.Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 187 | Replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood. Rest as specified in drg and directed by Engineer-in-Charge/ GE. Make :- Greenply, Model :- Green / Make :-Century, Model:- Maxima / Make:- Duro, Model :- Duromac / Make:- Archid, Model :- Archidply Premium/ Gold |
| 188 | Polishing one coat to old and two coats to new surfaces to table bed side with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 189 | BOOK CASE : FD-45(M), FD-237, FD-355 Dismantle, take out carefully & replace old components of book case. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-15 |
| 190 | Removing of existing U/S top and S & F new top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make of HDHRM Century or equivalant as approved by GE). |
| 191 | Replacement of bottom & S & F new bottom |
| 192 | Replacement of side & S & F new side |
| 193 | Replacement of shelf with S&F 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 194 | Replacement of partition. |
| 195 | Polishing one coat to old and two coats to new surfaces to Book Case with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 196 | SOFA SET TO SEAT 5 (3 seater +1 seater +1 seater) : (FD/MAP-II/02) |
| 197 | Taking out U/S rear legs and provn of new rear legs made of 1st class HW for sofa single/ three seater. |
| 198 | Taking out U/S front legs and provn of new front legs made of 1st class HW for sofa single/ three seater. |
| 199 | Taking out U/S short rails and provn of new rails made of 1st class HW for sofa single/three seater. |
| 200 | Taking out U/S long rails and provn of new long rails made of 1st class HW for sofa three seater. |
| 201 | Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa three seater. (Make of Ply :- Greenply/ Century/ Duro) |
| 202 | Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa single seater. (Make of Ply :- Greenply/ Century/ Duro) |
| 203 | Taking out U/S back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa three seater. (Make of Ply :- Greenply/ Century/ Duro) |
| 204 | Taking out U/S back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa single seater. (Make of Ply :- Greenply/ Century/ Duro) |
| 205 | Taking out U/S arm and provn of new arm made of 1st class HW. |
| 206 | Removing u/s cushion and provn of new cushion made of 100 mm thick 'PU' foam, 40 density, ISI marked (Make- Sleepwell/Godrej/Kurlon) of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern. Rest as specified by Engineer-in-Charge/ GE. |
| 207 | Polishing one coat to old and two coats to new surfaces to Sofa three seater with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 208 | All as per item No. 10.11 here-in-before but Sofa single seater. |
| 209 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender