Tender For Repair/Maint To Mes W/S Installation (E/M And B/R Wk) At Poonch Under Age B/R-Ii Of Ge 881 Ews
Tender Value
25 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Mes W/S Installation (E/M And B/R Wk) At Poonch Under Age B/R-Ii Of Ge 881 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR/MAINT TO MES W/S INSTALLATION (E/M AND B/R WK) AT POONCH UNDER AGE B/R-II OF GE 881 EWS Contract No : GE/PNH-58/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B&R PORTION:-Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed. |
| 4 | Dismantling water tank and removing to store of capacity exc 250 Ltrs and not exc 500 Ltrs all as specified and directed. |
| 5 | Dismantling water tank and removing to store of capacity exc 500 Ltrs and not exc 1000 Ltrs all as specified and directed. |
| 6 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. |
| 7 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. |
| 8 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed. |
| 9 | 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified. |
| 10 | 75 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 11 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, laid in trenches or in floor as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 12 | 75mm bore PVC (SWR) bends any radius fixed in floor in repair all as specified and directed. |
| 13 | 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fixed in repair all as specified and directed. |
| 14 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet,complete all as specified and directed. |
| 15 | PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint fixed in repairs, to walls as soil pipe with & including clamps, complete all as specified and directed. |
| 16 | 110 mm bore PVC (SWR) bends any radius fixed in repair all as specified and directed. |
| 17 | PVC (SWR) vent cowl for 110mm dia fixed in repair, all as specified and directed. |
| 18 | Non skid joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 19 | Glazed ceramic coloured tiles of size 450x350mm x 7mm/350X250X7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 20 | Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | Machine cut kota stone slab 18-20mm thick in riser or steps,skirting,dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 22 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 23 | Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe, fixed in repair complete all as specified and directed. |
| 24 | PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed, complete all as specified and directed. |
| 25 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin or urinal incl all necessary brackets etc 32mm dia all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair wash basin, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe as specified and directed. |
| 27 | S&F in repair 20mm dia aluminium anodised tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 28 | S &F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 29 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 30 | Bib taps 15mm bore two way of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 31 | 15mm bore Stop valve cast copper alloy chromium plated concealed type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 32 | Supply & fixed in repairs Angle valve cast copper alloy, high pressure with crutch or butterfly handle, 15 mm bore complete all as specified and directed. |
| 33 | Chromium plated shower roses with or without swivel joints, of size 200mm x 200mm, including Shower arm 15 mm size, 195mm long with bend of 45degree with flangeand fixing to steel pipe or union in repair complete all as specified and directed. |
| 34 | S & F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 35 | S&F in repair PVC valve less, symphonic action type flushing cistern 07 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 36 | 20mm OD 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc including taking down of existing pipes of any description all as specified and directed. |
| 37 | 25 mm OD 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls,ceilings or in floors etc including taking down of existing pipes of any description all as specified and directed. |
| 38 | S&F in repair 15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 39 | 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) fixed in repairs, complete all as specified and directed. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 41 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 42 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 43 | Taking down chowkhats or frames n. exc 1.5 Sqm but (without taking off shutters from frame) complete all as specified and directed. |
| 44 | Taking down shutters of any description exc 1.0 sqm but n exc 2.0 sqm each complete all as specified and directed. |
| 45 | 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 46 | 30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 47 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 48 | 300mm long aluminium alloy anodized sliding door bolt with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 49 | 150mm size MS anodised door handles complete all as specified and directed. |
| 50 | 150mm long MS barrel tower bolts complete all as specified and directed. |
| 51 | Mild steel butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 52 | 100mm long MS barrel tower bolts complete all as specified and directed. |
| 53 | Mild steel butt hinges, medium weight, cold rolled,75mm long fixed, complete all as specified and directed. |
| 54 | Extruded aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 55 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 56 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 57 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 58 | S&F in repair floor door stopper of aluminium alloy body with over all length of cover plate of 140mm and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 59 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 60 | False ceiling calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 4mm thick having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) fixed with and including grid system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall and suspended with hangers at every 1200 mm c/c in both directions using 4.0mm dia pre-straightened GI wire fixed with suitable cleats and fastners complete all as specified and directed. |
| 61 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 62 | Rendering 15mm thick on fair faces of brick or stone masonry wall surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 63 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 64 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 65 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. One or more coats on old surfaces including preparation of old surfaces complete all as specified and directed. |
| 66 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of Camouflage Pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified nd directed. |
| 67 | Material & Labour for applying One or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of Camouflage Pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces including preparation of old surfaces all as specified and directed. |
| 68 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as specified and directed. |
| 69 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 70 | Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed. |
| 71 | Walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 72 | All as per Srl item no 70 above but except stone. |
| 73 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 74 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and directed. |
| 75 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. |
| 76 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 77 | 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 all as specified and directed. |
| 78 | 0.63mm Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings fixed with L-type or J-type or cranked hook bolts including Nainital or similar pattern roof coverings all as specified and directed. |
| 79 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 80 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws asspecified complete all as specified and directed. |
| 81 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces including preparation of surfaces, complete all as specified and as directed. |
| 82 | Chequered cement concrete tiles 300mmx300mmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors/path including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 83 | 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified. |
| 84 | Sand filing under floor all as specified and directed. |
| 85 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and colour pigment, any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade complete all as specified and directed. |
| 86 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone/ concrete, glazed with putty or fixed with beads, complete all as specified and directed. |
| 87 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares not exceeding 0.50 Sqm in each pane fixed in repairs, complete all as specified. |
| 88 | Taking down existing tarfelt including tiles and demolition of concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 1.50 Km and n exc. 5.0 Km including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc and , complete all as specified and as directed. |
| 89 | Water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment /specification including ponding test as specified:- |
| 90 | Applying a coat of cement slurry @ 3Kg cement/sqm on cleaned surface of RCC roof slab complete all as specified and directed. |
| 91 | PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling to existing slab complete all as specified and directed. |
| 92 | 10mm thick screed bed or bedding layers in cement mortar (1:4) on roof slab icluding parapet and including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement bag complete all as specified and as directed. |
| 93 | Applying bitumenous primer conforming to IS-3384 @ 0.3 ltrs per Sqm over plastered surfaces of roof slab including parapet surface complete all as specified and directed. |
| 94 | Applying a coat of hot blown VG-20 paving grade (60-80 panetration) bitumen conforming to IS-3384 @ 1.20 kgs per Sqm over priming surfaces of roof slab including parapet surface complete all as specified and directed. |
| 95 | Providing a layer of APP based polymembric water proofing membrane ISI marked minimum 3mm thick laid with overlaps, bonded with hot blown bitumen with torch application method including end operlaps not less than 150mm and side lap 75mm, membrane shall be five layered with centre core as 90 microns high density polyethylene film, minimum weight of membrane shall be 3.60 Kgs/Sqm, overlap shall be sealed with suitable adhesive as per manufacturer's instructions, polymetic membrane shall be taken to a height of 60cm(min) and inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed. |
| 96 | Applying a coat of hot blown VG-20 paving grade (60-80 panetration) bitumen conforming to IS-3384 @ 1.2 kgs per Sqm over APP membrane and blinded with dry fine sand @ 0.50 kg/sqm dusted over bituemn complete all as specified and directed. |
| 97 | Dismantling fencing wire mess and any type of fencing etc, complete all as specified and directed. |
| 98 | Dismantling posts and struts (wood, steel, or RCC ) any section, including taking out embeded portion and making good disturbed ground complete all as specified and directed. |
| 99 | Excavation in post holes (or similar holes) each n exc 0.50 cum , getting out in any type of soil (soft/loose and hard/dense soil), returing, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 100 | Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in mass concrete, filling in foundation complete all as specified and directed. |
| 101 | S & F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 102 | Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including driling holes in iron and fixing complete all as specified and directed. |
| 103 | Supply Chain link MS galvanised fencing, any size or type. |
| 104 | Mild steel screw bolts (machine made) 5 to 10mm dia of nect with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips including complete all as specified and directed. |
| 105 | Mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 106 | Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 107 | E/M PORTION:-Taking down carefully copper/ aluminium unserviceable/ perished point wiring with casing caping (light, fan, socket or power complete) including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 108 | Taking down unserviceable sub mains wiring including earth continuity any type / size with surface casing / caping / TW batten / PVC conduit surface or recess and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 109 | Point wiring with two single core, 1.5 Sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm (nominal area) size copper conductor cable, as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC casing capping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, Collers, Bend, PVC Conduits for crossisng etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc for the followings:- |
| 110 | One light point controlled by one switch complete all as specified and directed. |
| 111 | One fan point (ceiling and exhaust) controlled by one switch complete all as specified and directed. |
| 112 | One 5 Pin switch socket combination 6 Amp on same board complete all as specified and directed. |
| 113 | One 5 Pin switch socket combination 6 Amp on independent board complete all as specified and directed. |
| 114 | All as per item No.108 above but with two 2.5 sqmm size cable as phase and neutral and one 1.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 115 | Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed. |
| 116 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. |
| 117 | Switch bell push flush type 6 Amp single pole one way (ISI marked) complete all as specified and directed. |
| 118 | Socket outlet multipurpose combination 2 in 1, 3 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 119 | Switch socket multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 120 | Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal,complete all as specifed and directed. |
| 121 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 122 | Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 123 | Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified directed. |
| 124 | LED tube light fittings mirror type with high out put diffuser 2 feet , 10 watt 220 volt AC decorative box type with driver and connecting up with three core flexible copper conducor cable of suitable size from ceiling rose complete all as specified and directed. |
| 125 | S&F in repair building security light fittings, 30 watt LED,230v, AC out door type pre-wired, IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 126 | S&F in repair Inverter LED Lamp, CDL, 12 watt, B22 base all as specified and as directed. |
| 127 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 4 Ways, Double Door (IP-43), with neutral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 128 | All as per item No 126 here-in-before but for 8 way. |
| 129 | All as per item No 126 here-in-before but for 12 way. |
| 130 | S&F in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. |
| 131 | S&F in repair MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 40 amps, complete all as specified and as directed. |
| 132 | S&F in repair including taking out unsv exhaust fan from site and replace with new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including all connecting accessories complete and as directed by engineer-in-charge. |
| 133 | LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. |
| 134 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 135 | Supply and fix in replacement submain wiring with two single core 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade and one single core 2.5 Sqmm as earth continuity conductor drawn in and including PVC casing caping of suitable size with accessories complete all as specified and directed. NOTE: (i) Two run of 4 Sqmm and one run of 2.5 Sqmm copper cable including casing caping shall be measured as one unit. |
| 136 | S&F in repair incl taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep and replacement with and incl new BLDC ceiling fan of 1200 mm sweep 230 V , 50 HZ incl all connecting accessories complete all as directed by Engineer-in-charge. |
| 137 | Twin core luminium cable of size 10 sqmm 2 core 1100 volts grade heavy duty cable PVC insulated,served with inner sheateing of PVC sheated in service connection suspended by insulating hangers not more than 1 Mtr apart incl taking down old Unsv cable all as specified and directed by Engineer-in-charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender