Tender For Repair / Replacement Of Plumbing, Sunken Repairs, Waterp Roofing, Plastering, Repairs To Windows And Other Connected Items Of Certain Buildings Of Moora, Nsv And Mhada Area At maintenance of (Mb) Ghatkopar Under Ge (Nw) Bhandup
Tender Value
30 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Plumbing, Sunken Repairs, Waterp Roofing, Plastering, Repairs To Windows And Other Connected Items Of Certain Buildings Of Moora, Nsv And Mhada Area At maintenance of (Mb) Ghatkopar Under Ge (Nw) Bhandup
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc outside MD land complete all as specified and directed. |
| 2 | M & L for Non-skid ceramic tiles (coloured) 7 to 8 mm thick rectangular area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) laying floor finished complete all as specified and directed. |
| 3 | M & L for glazed ceramic coloured tiles 300 x 200 mm x 7 mm thick in vertical surfaces such as skirting / dado and risers to steps over and including 10 mm thick rendering in CM (1:3) on fair faces of brick / concrete surfaces as in backing coat for tiles. etc complete all as specified and directed. |
| 4 | M & L for 9 to 10 mm thick glazed coloured ceramic tiles (square / rectangular) with border, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 5 | Demolition of concrete in ground floors (un reinforced) and paving not exceeding 15 cm thickness (below or above ground level) and removal of rubbish / demolished materials out of MD land complete all as specified and directed. |
| 6 | M & L for 100 mm thick cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate in flooring finishes the surfaces even and smooth without using extra cement etc complete all as pecified and directed. |
| 7 | M & L in repairs for machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface, as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM (1:4) complete all as specified and directed. |
| 8 | M & L in repairs for machine cut kota stone slab 20 - 25 mm thick over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over in floors over and including 20 mm thick screed bed in cement mortar (1:4) finished even and fair complete all as specified and directed. |
| 9 | M & L for 75 mm thick cement concrete (1:3:6) type C1 (20 mm graded aggregate) as in plinth protection finished fair and even without using extra cement including forming 12 mm thick expansion joint filled with sealing compound Grade 'A' etc complete all as specified and directed. |
| 10 | M & L for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed. |
| 11 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15 mm complete all as specified and directed. |
| 12 | S & F 15 mm bore U-PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings complete all as specifiec and directed. |
| 13 | S & F 15 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 14 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20 mm complete all as specified and directed. |
| 15 | S & F 20 mm bore U-PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings complete all as specifiec and directed. |
| 16 | All as per description of item No 13 above but 20 mm bore. |
| 17 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25 mm complete all as specified and directed. |
| 18 | S & F 25 mm bore U-PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings complete all as specifiec and directed. |
| 19 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40 mm complete all as specified and directed. |
| 20 | S & F 40 mm bore U-PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings complete all as specifiec and directed. |
| 21 | M & L for cutting and grooving of wall for fixing of pipe lines and after fixing of GI pipe line and making good of all cutting surfaces complete all as specified and directed. |
| 22 | S & F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed. |
| 23 | S & F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 40 mm bore complete all as specified and directed. |
| 24 | S & F in repairs 600 x 450 mm looking mirror of selected quality with chromium plated brass screws and cup washers etc complete all as specified & directed. |
| 25 | S & F in repairs for 20 mm dia fancy type chromium plated curtain rods with fixing fancy brackets, brass screws etc complete all as specified and directed. |
| 26 | S & F in repair plastic water closet seat cover as per required colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed. |
| 27 | S & F in repair brass chromium plated towel rail 20 mm dia 'D' type 600 mm long between flanges, of with and including chromium plated brass screws etc complete all as specified and directed. |
| 28 | S & F in repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per required colour with flat bottom and seat cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern) etc complete all as specified and directed. |
| 29 | S & F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests, and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc complete all as specified and directed. |
| 30 | S & F in repairs wash hand basin, vitreous china white of size 550 x 400 mm, 32 mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15 mm dia pillar taps chromium plated fancy type etc complete all as specified and directed. |
| 31 | Supply and fix in repair 10 litre, PVC, valveless, syphonic action type, flushing cistern, low level / high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed. |
| 32 | S & F in repair fancy type 150 mm size square brass CP shower rose complete all as specified and directed. |
| 33 | S & F in repair fancy type chromium plated brass two way bib cock suitable for 15 mm bore pipe complete all as specified and directed. |
| 34 | S & F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. |
| 35 | S & F in repairs 15 mm bore PVC connections, with PTMT nuts of length 450 mm complete all as specified and directed. |
| 36 | S & F in repair fancy type brass chromium plated soap dish of 160 x 160 x 90 mm complete all as specified and directed. |
| 37 | S & F in repair brass CP health faucet with 8 mm dia 1.0 meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed. |
| 38 | S & F in repair PTMT cabinet mirror of overall size 350 x 450 mm and fixed to wall complete all as specified and directed. |
| 39 | S & F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed. |
| 40 | S & F in repairs CP angle cock 15 mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 41 | S & F in repairs CP bib tap 15 mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 42 | S & F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15 mm bore fancy type complete all as specified and directed. |
| 43 | S & F in repairs vitreous china counter top oval type coloured wash basin suitable size including pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified and directed. |
| 44 | S & F in repairs brass chromium plated moca wall mixer 3 in 1 fusion, 15 mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. |
| 45 | S & F in repair fancy type 15 mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified and directed. |
| 46 | S & F in repairs rimless single piece WC with UF soft close seat cover, hinges, fixing accessories, accessories set and cistern fittings, size (360 x 675 x 750 mm), S Trap-300 mm including making good to floor complete all as specified and directed. |
| 47 | S & F in repairs stainless steel railing special alloy (grade 304) pipe 1.50 mm thick and any dia of pipe, including necessary cutting, notching organ welding, grinding and drilling counter sunk holes and bending required shape by mechanical means in factory as per requirement withou forming wrinkles and butting polishing complete all as specified and directed. |
| 48 | M & L in repair for Aluminium composite panel work for partition wall and necessary fittings and fixing arrangement and finishing complete all as specified and directed. |
| 49 | M & L for preparation of old surface of wall by filling cracks by fill paste of Asian or equivalent make as approved by GE, removing loose paint etc removing nails etc and making good surface by applying two coat of white birla / JK wall care putty in complete area, smoothen surface by sand paper and applying two coat of Royale of asian or Equivalent make over coat of primer complete all as specified and directed . |
| 50 | S & F in repairs vitreous china half stall urinal white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, with brackets complete all as specified and directed . |
| 51 | S & F in repair 160 mm bore PVC rain water pipe single socketed any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps 8 mm dia with two nuts wall nails etc including taking down and filling nail holes on the walls to prevent seepage and making good complete all as specifed and directed. |
| 52 | S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 53 | S & F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed. |
| 54 | S & F 160 mm bore PVC (SWR) bends any radius diminishing pieces or tapers etc, complete all as specified and directed. |
| 55 | S & F 110 mm bore PVC (SWR) tee of any radius complete all as specified & directed. |
| 56 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 57 | S & F PVC (SWR) 75 mm bore bends any radius complete all as specified and directed. |
| 58 | S & F CI floor trap 75 mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & taking down old trap complete all as specified and as directed. |
| 59 | S & F CI floor trap 100 mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & including taking down old trap complete all as specified and as directed. |
| 60 | S & F aluminium section in doors / windows / kitchen cupboards, any type, powder coated in approved colour (thickness of powder coating not less than 50 micron) aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing bakelite sheet and all necessary fittings complete, screws, plugs, locking arrangements for cupboard, nylon ball bearing, hinges, handle, tower bolt, etc including taking down complete all as specified and directed.Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet will be measured and paid separately. |
| 61 | S & F aluminum anodised grill DG-202 (10 mm x 8mm) of Deco grill or equivalent fixed with 'F' section (Min wt should not be less then 3.6 kg/sqm) of approved make complete all as specified and directed.Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE.(ii) Minimum thickness of anodizing shall be 15 microns. |
| 62 | Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane etc complete all as specified and directed. |
| 63 | Demolition of the existing brick coba treatment over roof slab completely including throughly cleaning complete all as specified and removal of the demolished material to outside MD land complete all as specified and directed. |
| 64 | M & L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in levelling course over RCC roof surface to achieve required slope including making rounded or chamfered on edges mixed with WPC @2% by weight of cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately as supply only. |
| 65 | M & L for application of roof treatment including surface preparation opening of cracks and application of cement based coat as per manufacturing instruction having minimum service life of 10 years warranty and complete all as specified & directed by Engr -in-charge Make:- Thermacool or Dr Fixit or Asian Paint or techno commercial equivalent make as approved. |
| 66 | M & L for application of wall treatment including surface preparation opening of cracks and application of cement based coat as per manufacturing instruction having minimum service life of 5 years warranty and complete all as specified & directed by Engr -in-charge. Make:- Thermacool or Dr Fixit or Asian Paint or techno commercial equivalent make as approved. |
| 67 | Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specifed and directed. |
| 68 | M & L for rendering 10 mm thick in CM (1:6) on brick walls surface finishing even and smooth (without using extra cement) etc complete all as specified and directed by EIC. |
| 69 | Material and labour for rendering 15 mm thick in cement plaster (1:4) on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement coat including using water proofing compound 2% by weight of cement etc complete all as specified & directed. Note:- Supply only water proofing compound will be measured and paid separately |
| 70 | Supply only integral water proofing compound complete all as specified and directed. |
| 71 | M & L for rendering 5 mm thick in CM (1:3) on concrete surfaces as in ceiling and finishing the surface even and smooth complete all as specified and directed. |
| 72 | M & L for preparation of new plastered surfaces on walls, chajjas, filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed. |
| 73 | M & L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper including application of wall care putty for smooth finish etc with roller over one coat of alkali resistant primer including chalk whiting complete all as specified and directed. |
| 74 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of wall care putty including primer complete all as specified and directed. |
| 75 | Material and labour for cracks with polymer based chemical Dr fixit cracks shrink free or equivalant for cracks not exceeding 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonry including scaffolding etc complete all as specified and directed. |
| 76 | M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller one coat of oil bound distemper including wherever necessary filling of nail holes / inequalities with putty for smooth finish etc complete all as specified and directed. |
| 77 | M & L for preparation of old decorated surfaces of ceiling brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying two coats of oil bound distemper ove a coat wall care putty complete all as specified and directed. |
| 78 | M & L for preparation of old decorated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | M & L for preparation of old wooden surfaces of any description, not other wise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 80 | M & L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss effloresence salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed . |
| 81 | M & L for preparation of old surfaces of walls / ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots, washing down with water, filling of cracks with Dr fixit crack filler or equivalent make and applying one coat of 100% antifungal weather resitant exterior acrylic paint over one coat of primer of approved shade including necessary scaffolding work etc complete all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of valley gutter and expended metal any description not otherwise provided for complete all as specified and directed. |
| 83 | S & F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, angle, channel or flat section, plain plates) including distance pieces, cleats, welding and braceing etc, Fe-410W(Gde-E-250) quality-B, including necessary scaffolding etc complete all as specified and directed. |
| 84 | S & F Mild steel angles, bars, flats, plane, angle cleats for securing to vallay gutter supports, wall ties,securing purlins J or L hook clamps with nut bolts, washers and similar small articles confirming to Fe 290 or Gde-E165 complete all as specified and directed. |
| 85 | S & F in repairs Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 86 | M & L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed. |
| 87 | S & F in repair fancy type sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. |
| 88 | S & F in repair fancy type glass corner 300 mm radius of 10 mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed. |
| 89 | Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removal of rubbish / demolished materials out of MD land complete all as specified and directed. |
| 90 | M & L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specifed and directed. |
| 91 | Cleaning of PVC water tanks at any height (on accessible / inaccessible of roofs) by removing all scale, dirt, mud, any foreign material and removing accumulated silt other dirty substance, algae, fungus and other bacterial material from sides / bottom of tank cleaning shall be done by means of wire brushes / water jet application of UV radiator and approved chemical (chloriten) unpluging flushing out complete, cleaning the tank and again cleaning with fresh water and plugging back from mouths of circulating pipes. The entire cleaning process shall be carried out without damaging the water tank. After cleaning writing letter / figurers in black back ground with white enamel paint of the capacity upto 500 litres:(i) Date of Cleaning(ii) Next due date of cleaning(iii) Remove of the existing lettering / figures completly |
| 92 | All as per item no. 91 above but for capacity exceeding 500 litres but not exceeding 1000 litres |
| 93 | All as per item no. 91 above but for capacity exceeding 1000 litres but not exceeding 2000 litre |
| 94 | All as per item no. 91 above but for capacity exceeding 3001 litres but not exceeding 5000 litres |
| 95 | S & F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 20 mm dia complete all as specified and directed. |
| 96 | S & F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 25 mm dia complete all as specified and directed. |
| 97 | Dismantling water tanks 500 litres and not exceeding 1000 litres and removing to store all retrieved material complete all as specified and directed. |
| 98 | Dismantling water tanks 1000 litres and not exceeding 2000 litres and removing to store all retrieved material complete all as specified and directed. |
| 99 | S & F of 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 100 | S & F of 1000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed |
| 101 | S & F of 2000 litres Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed |
| 102 | M&L for special treatment for sunken portion of WCs/ Bath & toilet executed in following stages:-Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc.Stage 2 :- Providing 10 mm thick plaster in CM (1:3) mixed with integral water proofing chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion / quantity all as per Manufacturer's instructions.Stage 3 :- Apply Dr Fixit Primeseal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as per Manufacturer's instructions.Stage 4 :- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions.Stage 5 :- Rendering 10 mm thick in CM (1:3) mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacture's instructions.Stage 6 :- All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP all as per Manufacturer's instruction. Stage 7 :- Making halls in wall and fixing 600mm long 40mm dia medium grade GI spout for draining the surplus water if any.Stage 8 :- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion. water tightness of repaired sunken portion and filling of sunken portion for cement concrete Type E2 (1:5:10) using 40 mm graded aggregate as in lean concrete complete all as specified and directed. Note :- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's / Baths shall be upto 35 cm, which is to be taken into account while quoting the rate against this item. (c) Rate quoted by Contractor shall be deemed to be included for all the horizontal and verticale treated surfaces of sunken portions of WC & Bath. |
| 103 | Water proofing treatment to Sunken floor are as under-(a) Cleaning the surface of any description with wire brush, detecting sources of leakages / seepages and removing / taking down unsound treatment / surface (b) M & L for making holes with drill machine of dia 18 mm for carrying out non-destructive waterproofing treatment to floors, sunken portion of toilet / bathroom and junctions of floor and walls of bath / WC and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting with first course of injection MDI based PU foam and second course of injection with PU plain all as per manufacturers instruction etc and MSL for fixing the metallic packer for hydrofobic PU foam sealer as per manfracture specification Note:-(a) The PU foam and PU plain shall have 100% solids and solvant free and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 500.(b) Shall have minimum 100 CPS viscosity and shore hardness minimum 50DMake: PIDILITE or equivalent make in other brand as approved by GE. |
| 104 | M & L for tile joint chemical cleaning a and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white / matching colour) epoxy tile grout of Pidlite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender