Tender For Provn Of Trg Shed, Addn/Altn Of Floor, Provn Of 07 X Split Ac, 07 X Air Conditioning System, Addn/Altn External Electrification And Provn Of Standby Lt Cable Inside Vijay Durg Under Ge(Vd) Kolkata
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
8 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Trg Shed, Addn/Altn Of Floor, Provn Of 07 X Split Ac, 07 X Air Conditioning System, Addn/Altn External Electrification And Provn Of Standby Lt Cable Inside Vijay Durg Under Ge(Vd) Kolkata
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | CORRIGENDUM 1 | BOQ | 22-Aug-2026 |
| 2 | 11-Aug-2026 | CORRIGENDUM | BOQ | 22-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified |
| 2 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. |
| 3 | S&F 12 mm thick decorative CNC PVC grills (jali) of any colour including fittings complete all as specified and as directed.. |
| 4 | Material & Labour for preparation of old painted surface (complete removal) and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces. complete all as specified and as directed. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and as directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge. |
| 7 | M&L 18-20 mm thick granite slab (of any type, Z- black or red in colour / in platform , floor , steps of stair cases , pillars or flat surface of wall , and on verticle surfaces etc and like set and jointed in neat cement slurry and pointed in white cement (1:2) mixed with pigment to match laid over screed bed 15mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge |
| 8 | M& L for Granite tiles 10mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with cement slurry and pointed in white cement (1:2) mixed with pigment to match laid over screed bed 15mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge including grinding and polishing complete all as specified and as directed. |
| 9 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 10 | Excavating in post hole (or similar hole) each nexc0.5 cum getting out, returing,filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and kamking good surface in soft and loose soil. |
| 11 | S & F MS angle,flats,etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250)quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed. |
| 12 | M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed. |
| 13 | E/M PORTION Supply and install split AC units 230 Volts indoor/outdoor complete with cordless remote control with minimum 5 star rating of capacity 2TR including necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable will be neasured and paid separately under respective item |
| 14 | Supply and fix discharge copper pipe line heavy duty 1/4\\" dia and flair nuts from indoor to outdoor unit of split AC 1.5 TR /2 TR capacity all as specified and directed. |
| 15 | Supply and fix suction copper pipe line heavy duty 5/8'' dia and flair nuts from indoor to outdoor unit of split AC 1.5 /2 TR capacity all as specified and directed. |
| 16 | Supply and fix PVC pipe nylon imbraided 1of size 5/8\\" for condenser water drain fitted with clamps/ concealed in wall all as specified and directed. |
| 17 | S&F Nitrile Rubber insulation for copper tubing of size 1/4'' dia duly wrapped complete all as specifed and directed. |
| 18 | S&F Nitrile Rubber insulation for copper tubing of size 5/8'' dia duly wrapped complete all as specifed and directed. |
| 19 | Supply and fixing angle iron brackets wall mounted / Floor mounted as per site made of steel including two coats of powder coated finish and foundation bolts and nuts firing complete and making good the disturbed surface complete all as specified and as directed. |
| 20 | Supply and fixing copper cable 2.5 sqmm 4 core duly connected and properly clamped from indoorunit to Outdoor unit complete all as specified and directed |
| 21 | M&L for Backlid SS Letter of size upto 300 to 600 mm made of SS as per site requirement with Font with any letters in appropriate font size and other sides with Logo , duly prewired and including LED Strip light (Length of Strip Lights as per site requirement) inside the board incl necessary electrical connection from Switch board/PVC Junction Box with PVC Copper Cable 1.5 sqmm 3 core inside the PVC conduit Rigid/Flexible as per site requiremnt and Board fixed to the angle iron frame incl. necessary fixing arrangement such as angle iron, flat iron & channel complete all as specified and directed by Engr-in-charge. Note :-(i) Data to be written will be directed by Engr-in-charge.(ii) Angle Iron, Channels, Flat Iron and Other Iron work is included in above rate. |
| 22 | Excavation in trenches not exc 1.5 mtr width and not exce 1.5 mtr in depth in soft/loose soil and getting complete all as specified and as directed. |
| 23 | M&L for sand cushioning /sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. |
| 24 | M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed. |
| 25 | Laying in Trenches Bricks (Serviceable Bricks obtained from Item No. 9.00 here-in-after), for Cable Protection, complete all as specified and as directed. |
| 26 | Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed. |
| 27 | Removal of excavated material to a disance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 28 | Excavation/Cutting Road/ Hardstanding in Trenches not exc. 1.00 Meter wide and not exc. 1.00 Meter in depth and getting out, complete all as specified and as directed. |
| 29 | Supply, Laying and testing for replacement of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete of the following sizes and cross sectional area :-Note :- Necessary earth work to be measured and paid separately. |
| 30 | 35 Sqmm, 3.5 Core |
| 31 | 50 Sqmm, 3.5 Core |
| 32 | 25 Sqmm 3.5 Core |
| 33 | 400Sqmm 3.5Core |
| 34 | S&F LED Bldg Security Light fitting 30W and bracket all accessories with pressure die cast housing toughened glass and individual LEDs with secondary optics and IP 66 protection as in repair complete all as specified and as directed.Make - Philips /Crompton /Havells.or equivalent make specified in tender. |
| 35 | S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 12 way double door DB LL 4W DD VERT W/O MCCB.complete all as specified and as directed. |
| 36 | S & F MCCBs 415V, 16KA, 4 Pole 100Ampscomplete all as specified and as directed. |
| 37 | Supply and fixing MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. |
| 38 | Supply and fixing MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed. |
| 39 | Supply and fixing GI tubing 50mm bore (light grade) in trenches/floor/fixed along pole for cable incl taking down old unsv pipe complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixing 80 mm bore galvanized iron pipe (light grade) with all fittings, fixed in trenches/floor/fixed along pole for cable incl taking down old unsv pipe complete all as specified and as directed by the Engineer-in-charge. |
| 41 | Taking out old unserviceable LT panel board of any size and type and Supply, install, commissioning and testing of Indoor type LT panel board, cubical type, Flat top roof, dust and vermin proof, made out of 2.00 mm thick CRCA sheet of size 1800mm x 1800mm x 600mm, CPRI approved with front & back openable door (with locking arrangement) and making compartment for each MCCB separately, duly painted with two coats of powder coated paint over a coat of red oxide zinc chrome primer inclusive of four numbers Copper bus bar 1000 Amps of adequuate size for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper spreader and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland),and 01 Nos Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS Channel of size 50 x 50 x 6mm with 450 mm legs fixed with PCC complete all as directed by the Engr-in-Charge including supply and fixing of the following accessories:- |
| 42 | (a) ATS 630 Amp, 4 Pole + AST Controller - 01 Nos (Incoming). |
| 43 | (b) MCCB with thermal-magnetic releases of capacity 630A, 4P, 50 KA - 02 Nos (Incoming). |
| 44 | (c) Surge Protection Device, 3 Phase, 4 module, 1+ 2 type, maximum discharge current 100 kA - 02 Nos |
| 45 | (d) MCCB with thermal-magnetic releases of capacity 200A, 4P, 40 KA - 03 Nos (Ougoing). |
| 46 | (e) MCCB with thermal-magnetic releases of capacity 160A, 4P, 25 KA - 04 Nos (Ougoing). |
| 47 | (f) MCCB with thermal-magnetic releases of capacity 100A, 4P, 25 KA - 01 Nos (Outgoing). |
| 48 | (g) Digital Ammeter with Selector Switch - 01 Nos. |
| 49 | (h) Digital Voltmeter with Selector Switch - 01 Nos. |
| 50 | (j) MCB SP 6 Amps, 10 KA - 3 Nos. Make : L&T |
| 51 | (k) LED type indication lamp R Y B - 01 (set of 03) |
| 52 | (l) Current Transformer Ratio 630/5A - 03 Nos |
| 53 | (i) All incoming and outgoing cables, duly thimbled along with suitable size of brass cable glands, to be connected with accessories. (ii) All MCCB & Changeover to be connected internally with suitable size of copper strip. |
| 54 | Supply, install, commissioning and testing of Outdoor type LT panel board, cubical type,mounting in PCC base dust and vermin proof, made out of 3.15 mm thick CRCA sheet of size 1300mm x 1300mm x 500mm, CPRI approved with front and back openable door (with locking arrangement) and making compartment for each MCCB/change over switch separately, duly painted with two coats of powder coated paint over a coat of red oxide zinc chrome primer inclusive of four numbers copper bus bar 800 Amps of size 50mm x 6mm (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland),and 02 Nos Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with angle iron frame with base 50 x 50 x 6 mm with legs not more than 300mm long including grouting with PCC (1:2:4) complete including earthing all as directed by the Engr-in-Charge including supply and fixing of the following accessories:- Make : Star Electric & Engg Co/ CPRI approved. |
| 55 | INCOMING |
| 56 | (a) Onload manual Changeover 630 Amp, 4 Pole (open execution) Make: L&T |
| 57 | (b) MCCB design with Microprocessor Release of capacity 630A, 4P, 36 KA - 02 Nos (Incoming). Make : Legrand/Schnider/Siemens |
| 58 | OUTGOING |
| 59 | (c) MCCB design with thermal-magnetic releases of capacity 250 Amps, 4 Pole, 36 KA - 02 Nos (Outgoing). Make : Legrand/Schnider/Siemens |
| 60 | (c) MCCB design with thermal-magnetic releases of capacity 100 Amps, 4 Pole, 25 KA - 01 Nos (Outgoing). Make : Legrand/Schnider/Siemens |
| 61 | (c) MCCB design with thermal-magnetic releases of capacity 63 Amps, 4 Pole, 25 KA - 01 Nos (Outgoing). Make : Legrand/Schnider/Siemens |
| 62 | METERING INSTRUMENT |
| 63 | (a) Digital Ammeter with Selector Switch - 01 Nos. Make : L&T |
| 64 | (b) Digital Voltmeter with Selector Switch - 01 Nos. Make : L&T |
| 65 | (c) MCB SP 6 Amps, 10 KA - 3 Nos. Make : L&T |
| 66 | (d) LED type indication lamp R Y B - 01 set. |
| 67 | (e) Current Transformer Ratio 600/5A - 03 Nos |
| 68 | Note:-(i) All incoming and outgoing cables, duly thimbled along with suitable size of brass cable glands, to be connected with accessories. (ii) All MCCB & Changeover to be connected internally with suitable size of copper strip. (iii) Earthing as per SSR 19472 and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade , charcoal dust and salt etc and connected to earthing test point including taking up of old UNSV earthing complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repairs LED Flood Light fitting, of various capacity as mentioned under, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-.(a) minimum system efficacy 120 lumen/watt(b) CRI not less than 70, (c) THD < 10%(d) Power factor not less than 0.90(e) having in built short circuit and surge protection upto 4 kV(f) having 10 KV external surge protection (g) colour temperature not less than 5700 degree K(h) life not less than 50000 hours of operation |
| 70 | 70 Watt Flood Light Luminaire (PHILIPS CAT NO- BVP1281 LED085 CW FG SY5WB 70W V1 / SURYA CAT NO- SLE FL 70W IP66 LMS NEO N/ HAVELLS CAT NO-JETAALBAFLOODLIGHT70W |
| 71 | 120 Watt Flood Light Luminaire (HAVELLS CAT NO-JETAIRISFL120W LED757APWBLTG/ SURYA CAT NO-SLE FL 120W IP66 LMS NEO N/CGL CAT NO- TFS-504-70-57-60D-HL2-GL-NSG |
| 72 | 150 Watt Flood Light Luminaire( SURYA CAT NO- SLE FL 150W IP66 LMS NEO N / HAVELLS CAT NO- JETAIRISFLS150WLED757PWBLTG/PHILIPS CAT NO- BUP283LED181CW FG SY5NB 150W V1 |
| 73 | S&F of Feeder Pillar Box of size 80x80x45 8m, made out of CRCA Sheet 3.0mm thick, Outdoor, Pedestal type, Weather Proof, Epoxy based Powder Coated Paint, Self-Closing Door having with Locking Arrangement, mounted on brick work Platform of size 100x100x60 Cm with plastering, comprising with 4 No. Aluminium Bus-bar of current rating 400 Amp with and including 1 no. MCCB 160 Amp 25 kA, 4 Pole, complete all as specified and as directed. |
| 74 | Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth strip 25 x 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987 incl taking out of existing earthing complete all as specified and directed. |
| 75 | Supply and fixing Galvanised iron strip 25 x 4mm for connection of earthing with LT Panel board burried in ground complete all as directed. |
| 76 | Supply and lay pipe HPDE pipe of size 50 mm complete all as specified and directed by Engr-in-charge. |
| 77 | Supply and lay pipe HPDE pipe of size 100 mm complete all as specified and directed by Engr-in-charge. |
| 78 | Taking out of interlocking paver block, any shape or size and Re-laying the same after laying of LT cable of any size and also removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed.NOTE : Sand, if required for connection of cushioning level will be measured and paid seperately. |
| 79 | Supply and Laying of Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with 6 mm top layer of coloured rubberised anti abrasive material complete all as specified and directed. |
| 80 | M&L for Relaying XLPE Under Ground Cable of any description (Serviceable Cable obtained from Item No. 6.00 here-in-before) 1100 Volt grade, after Fault rectification including necessary Aluminium Thimbles, jointing and Testing, complete all as specified and as directed of the following cross sectional area 300 Sqmm to 400 Sqmm, 3.5 Core |
| 81 | S&F Heat shrinkable straight through Jointing Kit suitable for 1100 volts grade XLPE insulated stranded aluminium conductor cable including testing on completion complete all as specified and directed by the Engr-in-Charge for the following size of cables 300 sqmm to 400 sqmm, 3.5 core |
| 82 | Demolition Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. |
| 83 | M & L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate for coping / encasing around of pole including necessary form work finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 84 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified & directed |
| 85 | Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 days
Aug 22, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender