Tender For Provision Of Electrical And Water Supply To Prefabricated Office Structure Of Nad (Kar) And Nai (Kar) At Site-A And Addition/ Alteration And Replacement Of Mangalore Tiles With Ppgi Sheets On Roof Top Of Building No P-113, P-114, P-115, P-
Tender Value
43.80 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
4 days left
EMD
87600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Electrical And Water Supply To Prefabricated Office Structure Of Nad (Kar) And Nai (Kar) At Site-A And Addition/ Alteration And Replacement Of Mangalore Tiles With Ppgi Sheets On Roof Top Of Building No P-113, P-114, P-115, P-116 And P-117 At Kadamba Vanam At Site A3.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trench not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and for laying of LT under ground cables/GI pipes getting out as in soft /loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick in soft/loose soil all as specified and directed. |
| 3 | Removing excavated material / soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 4 | Supply and laying of UPVC pipe 40 mm bore with all fittings for connection of pipe on walls / ceiling / floors / trench complete all as specified and as directed. |
| 5 | Supply and laying of UPVC pipe 25 mm bore with all fittings for connection of pipe on walls / ceiling / floors / trench complete all as specified and as directed. |
| 6 | S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 40mm dia bore complete all as specified and directed. |
| 7 | S&F 25mm dia automatic water level control float valve diaphragm attached with plunger and magnetic coupling complete all as specified |
| 8 | S&F rotational moulded polyethylene water storage tank, triple layered, dust proof with ISI marked black / white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 ltrs complete all as specified. |
| 9 | Supply and laying or fixing or passing through pipe or in cable ducts, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of 3.5 core 120 Sqmm size. |
| 10 | Note for Item No 9.00 :- Earth work, excavation, GI tubing/ DWC pipe for protection etc shall be measured separately under relevant items of this schedule work. |
| 11 | S&F DWC high density polyethylene pipes having 100/95 mm dia with all fittings/coupler/connecting accessories confirming to IS : 16098 Part-02 for cable protection fixed on poles/walls/laid under roads crossing etc and made good the disturbed surfaces/area complete all as specified and directed. |
| 12 | Supply, installation, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs not less than 750 mm height, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 600 amps for three phase 4 wire including the following accessories and fitted in : - |
| 13 | Note for item no 11.00 :- (a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 25 KA breaking cap adjustable thermal release range 160 amp of – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs, LED indicator lamp and other connecting accessories. (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp of –2 Nos. (ii) MCB SPN 40 Amps 4 Nos all as directed by the Engr-in-Charge. |
| 14 | Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6.0 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) normal with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR part I connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 meter long for earth wire including PCC (1:2:4) pit with precast RCC (1:2:4) type B -1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100 mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified. |
| 15 | Dismantling Single layer Mangalore pattern or similar tiles in roofing including ridge tiles. |
| 16 | Demolition of concrete unreinforced of any description and in any position all as specified and directed. |
| 17 | M&L for providing 20mm thick rendering over roof slab when concrete is green in cement mortar (1:3), finished even and smooth surface without using extra cement all as specified and directed |
| 18 | M&L for applying two coat of Smart care damp proof roller/brush over a coat of primer with smart care damp proof 33% dilution of Asian paint or equivalent including preparation of existing surface by complete removal of existing treatment by means of chipping the surface to remove loose particles and mortar and clean the surface with wire brush and water wash etc including filling & coving with smart care repair mortar (wherever required) filling of crack filler with smart care crack filler of Asian paints or equivalent (wherever required) complete all as per manufactures instructions, all as specified and directed by Engr-in-charge. |
| 19 | S&F rolled mild steel roof trusses (framed) trussed, purlins rail and fastenings and heavy brackets framing (Beam, tee, angle, channels or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E 165). |
| 20 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridge to wall fixed with self tapping screws as specified (Mangalore Pattern). |
| 21 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridge to wall fixed with self tapping screws as specified (Mangalore Pattern). |
| 22 | Taking up or down GI pipe and connections 25mm bore including cleaning or removal to store all as specified and directed. |
| 23 | S&F unplasticized PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe tubing 25mm bore medium grade, galvanised, ISI marked with all fitting etc complete all as specified and as directed. |
| 24 | M&L for preparation of old painted plastered surfaces of walls/ceiling of any description including application of acrylic emulsion exterior grade paint of required shade (Two or more coat applied) using mecchanical spray (maximum working pressure of 3300 PSI) weather proof of approved shade including necessary scaffolding and safety measures in (G+2) building as required etc complete all as specified and directed. |
| 25 | M&L for preparation of surface of steel and iron of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint using mecchanical spray (maximum working pressure of 3300 PSI) over a coat of red oxide, zinc chrome primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender