Tender For Repair/Replacement Of Flooring, Plumbing, Sanitary Fittings, Joinery, Periodical/ Welcome Maintenance Road/Path And B/R Maintenance Of Dad/Lao At Different Pockets/Locations Under Ge (I) Gos
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
20 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Flooring, Plumbing, Sanitary Fittings, Joinery, Periodical/ Welcome Maintenance Road/Path And B/R Maintenance Of Dad/Lao At Different Pockets/Locations Under Ge (I) Gos
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 2 | M&L for coloured glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed. |
| 3 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 4 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed |
| 5 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed |
| 6 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 7 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square.rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backcoat in CM 1:4 complete all as specified and directed. |
| 8 | M&L for Machine cut kota stone slab flooring 20-25 mm thick laid over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 9 | M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick back coat of cement mortar in 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 10 | M&L for 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed |
| 11 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed |
| 12 | M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed |
| 13 | Dismantling of water tank Capacity exc 250 not exc 500 Ltrs and removing to store complete all as specified and as directed |
| 14 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed |
| 15 | Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed. |
| 16 | Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed. |
| 17 | S&F for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 18 | S&F in repairs for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 19 | S&F in repairs white vitreous china squatting pan orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections complete all as specified and as directed |
| 20 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed |
| 21 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 22 | S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed |
| 23 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed |
| 24 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 25 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 26 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 27 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar :2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 28 | S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 29 | S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 30 | S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed |
| 31 | Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 32 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 33 | Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed. |
| 34 | Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed. |
| 35 | S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 36 | S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 37 | S&F for 25mm CPVC ball valve complete all as specified and as directed. |
| 38 | S&F for 25mm CPVC tank adopter complete all as specified and as directed. |
| 39 | S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed |
| 40 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and as directed |
| 41 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and as directed |
| 42 | S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed |
| 43 | S&F for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed |
| 44 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 45 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 46 | S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 47 | S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 48 | S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed.. |
| 49 | S&F for Stack clamps for 110 mm bore pipe, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof |
| 50 | S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed. |
| 51 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 52 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 53 | M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 54 | S&F in repairs 150 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 55 | S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed |
| 56 | S&F in repairs 40 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed |
| 57 | S&F in repair 4 levers brass mortice lock, verticle type, size 100mm. complete all as specified and as directed. |
| 58 | S&F in repairs 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 59 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 60 | Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 61 | Taking down the Shutters of any description n exc 1 sqm each complete all as specified and as directed |
| 62 | Taking down the Shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed |
| 63 | M&L for refixation of shutters of any description in same opening n exc 1 sq. m each complete all as specified and as directed |
| 64 | M&L for refixation of shutters of any description in same opening exc 1 sq. m but not exc 2 Sqm each complete all as specified and as directed |
| 65 | M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 66 | M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed. |
| 67 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 68 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 69 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 70 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. |
| 71 | M&L for preparaton of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described as directed and apply two coats of synthetic enamel paint over red oxide complete all as specified and as directed. |
| 72 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 73 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 74 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed. |
| 75 | M&L for fixed in repairs pelmet boxes or in narrow widths n. exc l5cm each, 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed. |
| 76 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed |
| 77 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed |
| 78 | S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed |
| 79 | S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 81 | S&F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 82 | S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 83 | S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 84 | S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 85 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 86 | S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 87 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 88 | S&F in repairs 75 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 89 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 90 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 91 | S&F in repairs 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 92 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 93 | S&F in repairs Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed. |
| 94 | S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed. |
| 95 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 96 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 97 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed. |
| 98 | M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed |
| 99 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 100 | M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 101 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 102 | S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 103 | Cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. |
| 104 | Cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. |
| 105 | S&F for Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed |
| 106 | M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 107 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 108 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 109 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed. |
| 110 | S&F Parryware wall mixer 3-in-1 complete all as specified and directed. |
| 111 | S&F in repair casecade health faucet hose and hook complete all as specified and directed. |
| 112 | S&F in repair 15mm dia Angle Stop Cock with wall flange omplete all as specified and as directed. |
| 113 | S&F in repair Corner shelf complete all as specified and directed. |
| 114 | S&F in repairs PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed. |
| 115 | S&F in repairs cylindrical tank cover for 500 ltrs, 1000 Ltrs & 2000 Ltrs complete all as specified and directed. |
| 116 | S&F for anodised aluminium three track sliding window frame work fabricated by using medium grade, Jindal Make box sections as per drgs. Window/partition panels shall be 5.5mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories, aluminium alloy wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks and aluminium deco grill (DG 201 @5.358 Kg/Sqm) complete all as specified and as directed. |
| 117 | S&F for 20mm dia two way bib cock complete all as specified and directed. |
| 118 | S&F for anodised aluminium door shutter frame work fabricated by using medium grade, box sections as per drgs. Door/partition panels shall be 5.5 mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories. etc complete. |
| 119 | S&F 1 mm thick stainless steel plate rack of size 900x600x200mm including fixing with rawal plug ang screws complete all as specified and directed . |
| 120 | S&F for Single piece white colour EWC Size 620x350x725mm complete all as specified and as directed. |
| 121 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 122 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 123 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed |
| 124 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 125 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square.rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backcoat in CM 1:4 complete all as specified and directed. |
| 126 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 127 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 128 | S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 129 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 130 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed. |
| 131 | S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed |
| 132 | S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 133 | S&F for 25mm CPVC Brass thread union complete all as specified and as directed. |
| 134 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 135 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 136 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 137 | M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed |
| 138 | S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 139 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 140 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 141 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 142 | Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 143 | Taking down the Shutters of any description n exc 1 sqm each complete all as specified and as directed |
| 144 | Taking down the Shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed |
| 145 | M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 146 | M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed. |
| 147 | S&F 30mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 148 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 149 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. |
| 150 | S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 151 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 152 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 153 | M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 154 | M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 155 | M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 156 | M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 157 | M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 158 | M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed |
| 159 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 160 | M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 161 | M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 162 | M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 163 | M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed |
| 164 | M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade in two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 165 | M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 166 | M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed |
| 167 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 168 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 169 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 170 | M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed |
| 171 | Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed |
| 172 | M&L for preparaion of newly plastered surfaces of walls and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 173 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 174 | M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and directed |
| 175 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 176 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed |
| 177 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 178 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 179 | M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed |
| 180 | M&L for Brick work with modular fly ash bricks straight or curved on plan to any in half brick thiick walls radius built in CM 1:4 complete all as specified and as directed |
| 181 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed |
| 182 | M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth including Water proofing compound (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 100 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab. |
| 183 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 184 | M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen) at 5 kg / 10 sqm complete all as specified and directed. |
| 185 | M&L for Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 186 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 187 | M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacutur's instructions complete all as specified and directed. |
| 188 | M&L for chequered cement concrete tiles 30cmX30cmX25mm thick, set, joined and pointed in neat cement slurry over 15 cm screed bed in floors with grey cement and pigment complete all as specified and directed. |
| 189 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 190 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 191 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender