Tender For Addn/Altn Of Roof Treatment, Sunken Floor And Other Connected Items At Sbs And Sas Enclave And Replacement Of Electric Sunken Box At Asal Uttar Enclave Under Ge (West) Ferozepur Cantt
Tender Value
43.31 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
14 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn Of Roof Treatment, Sunken Floor And Other Connected Items At Sbs And Sas Enclave And Replacement Of Electric Sunken Box At Asal Uttar Enclave Under Ge (West) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 2 | M&L 15mm thick CM(1:4) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 3 | Supply only liquid water proofing compound (WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction) complete all as specified and directed. |
| 4 | M&L for water proofing treatment to sunken floors of Kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (i) Application of two components of Acrylic modified Cementitious coating(aa) Clean the RCC Surface with wire brush and chisel out and mortar sticking to Surface(ab) Apply FOSROC NITOPROOF 600 PF (min 0.8mm dft) over a priming coat of NITOPROOF WB Primer or equivalent of ASIAN PAINT/SIKA/BERGER/ PIDILITE DR FIXIT |
| 5 | M&L PCC (1:5:10) type E-2 (using 40 mm graded aggregate) as in filling under sunken portion complete all as specified and directed. |
| 6 | M&L 25 mm tick PCC(1:2:4)type B0 using 12.5 mm graded aggrigate as in floor finished even and rough to receive top layer complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 8 | Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed. |
| 9 | M & L for 450X 300X 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with cement mortar bedding and removing off the premises complete all as specified and directed. Make- Kajariya, Somany, Johnson |
| 10 | Taking down chowkat with shutter n.exe 1.50 sqm (without taking off shutters) each complete all as specified and directed. |
| 11 | Taking down chowkhat with shutter exe 1.50 Sqm and n exe 4 Sqm( without taking off shutter) each complete all as specified and directed. |
| 12 | Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 13 | S& F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010). |
| 14 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.Make: Rajshri or equivalent as approved. |
| 15 | S & F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 16 | S & F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 17 | M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 18 | Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 19 | M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified and directed. |
| 20 | S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed. |
| 21 | S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed. |
| 22 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staple etc complete all as specified and directed. |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 24 | S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 25 | S&F 150mm Extruded aluminium alloy handle complete all as specified and directed. |
| 26 | S&F butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed. |
| 27 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 28 | S&F brass CP 20mm dia tabular towel rail, 600mm long between flanges as fixed in repairs complete all as specified and directed. |
| 29 | S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 30 | S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed. |
| 31 | S&F in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to pipe with aerator complete all as per manufacturer's instruction complete all as specified and directed. |
| 32 | S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed |
| 33 | S&F in repair stop valves, fancy type, CP with long shank and cup (concealed type) screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed. |
| 34 | Supply & fixed replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs complete all as specified and directed. |
| 35 | S&F in repairs looking mirror 600x450mm with aluminium channel frame, selected quality mounted on 6mm thick commercial ply wood back and fixed with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | S&F in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 37 | S&F in repair PVC Connection, Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 600 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed. |
| 38 | S& F Vitreous china wash down water closet pan ( pedestal pattern) white ( Excluding fixing bolts , flushing cistern and flush pipe as fixed in repairs complete all as specified and directed. |
| 39 | S&F Vitreous china squatting pan ,Orissa pattern size 580X440mm white, with integral foot rests including necessary lime concrete and 110mm bore PVC (SWR) 'P' trap with 550 to 600mm long neck for connecting WC to branch piece with cement joints fixed in repair complete all as specified and directed. |
| 40 | S&F in repairs Seat Cover (White colour) for pedestal pattern as fixed complete all as specified and directed. |
| 41 | S/F 10 litres capacity of Low level PVC flush Cistern as fixed in repairs and including of 32mmdia PVC flush pipe to connect from flush cistern to water closet ( any pattern) and making good all the Joints complete all as specified and directed. |
| 42 | S & F heavy duty Stainless Steel (AISI-304) Shower drain with Cockroach Trap (450 x 75mm) including all fittings and fixed with white cement fixed complete all as specified and directed |
| 43 | S&F in repairs, Vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc ccomplete all as specified and directed.Make : Hindware/Cera- Ist quality |
| 44 | S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 45 | S&F in repair Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixed complete all as specified and directed. |
| 46 | S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste coupling or urinal of suitable size complete all as specified and directed. |
| 47 | S&F in repairs stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed. |
| 48 | S&F in repairs toilet paper holder of brass, chromium plated or stainless steel to walls with CP brass screws complete all as specified and directed. |
| 49 | S&F in repairs glass shelves corner assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 50 | S&F in repairs PTMT grating doom 100mm dia with or without waste hole fixed complete all as specified and directed. |
| 51 | S & F in repairs for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 52 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 53 | All as per item No 52 but 20 mm bore tubing complete all as specified and directed. |
| 54 | M&L for GI steel water tubing,15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor complete all as specified and directed. |
| 55 | All as per item No 54 but 20 mm bore tubing complete all as specified and directed. |
| 56 | S& F in repair CPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia including taking up or down old tubing complete all as specified and directed. Make : Finolex/Shakti/Jindal |
| 57 | S& F in repair CPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15 mm dia including taking up or down old tubing complete all as specified and directed. Make : Finolex/Shakti/Jindal |
| 58 | Supply and Fix 20mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fixed as in repair complete all as specified and directed |
| 59 | Supply and Fix 15mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fixed as in repair complete all as specified and directed. |
| 60 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories) |
| 61 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 62 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 63 | S&F in repairs Stack clamps for 110 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 64 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 65 | S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 66 | S&F 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 67 | S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 68 | S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 69 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed. |
| 70 | S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed.. Make: Prayag/ polytuf |
| 71 | S&F Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed. |
| 72 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 73 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed. |
| 74 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 75 | M&L for PCC (1:4:8) type D2 40mm graded agg in foundations/sunken filling and mass concrete complete all as specified and directed |
| 76 | M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed. |
| 77 | Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed. |
| 78 | M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed. |
| 79 | All as per item No 78 above but using old bricks retrieved from item no 77 demolition including cleaning and removal of mortar from old bricks complete all as specified and directed. |
| 80 | Taking down cement plaster any description on brick or stone walls, /RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & as directed. |
| 81 | M&L for rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 82 | M&L Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified & directred. |
| 83 | M& L for applying Silane Siloxane based water repellent coating FOSROC NITOCOTE SN 522 (or equivalent of SIKA/Berger/Asian Paints/Pidilite/Dr Fixit) by evenly spraying or brushing (coverage approx 7 Sqm per litre of NITOCOTE SN 522) to external walls from plinth protection to bottom of window cills level complete all as specifed and directed.(i) Clean the surfaces to remove loose particulars or any efflorescence on bricks.(ii) Application of Silane Siloxane based water repellent by spraying or brushing (coverage approx 7 Sqm per litre of NITOCOTE SN 522) |
| 84 | M&L Rendering 5mm thick in cement mortar (1:3) on in ceiling, soffits of chajja or similar location any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement,etc complete all as specified & directred. |
| 85 | M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer and applying a coat of 1mm thick wall care putty complete all as specified and directed. |
| 86 | M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified. |
| 87 | M&L Preparation of new plastered surfaces and applying three coats white washing on ceiling surfaces complete all as specified and directed. |
| 88 | M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 89 | M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint. |
| 90 | M&L Preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 91 | M&L Preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 92 | M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed. |
| 93 | M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and directed. |
| 94 | M&L Complete removal of existing treatment of wall suface and applying two coats of oil bound distemper over a coat of primer on a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 95 | Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces complete all as specified and directed. |
| 96 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed. |
| 97 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 98 | M&L for 40mm thick average consolidated thickness, mud phuska on flat roofscomplete all as specified and directed. |
| 99 | M & L 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed. |
| 100 | All as item No 99 here in before but except tiles complete all as specified and directed. |
| 101 | M&L 20mm thick rendering of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to be finished even and smooth (without using extra lime or cement) for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid separately |
| 102 | M&L for water proofing treatment to roof surface including parapet wall / sunken floor comprising with the following course of treatment/ specifications form bottom to top:-(a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surfaceby forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing.Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions.(ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions. |
| 103 | M& L two coat of solar reflective bituminous aluminium Paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed. |
| 104 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 105 | M &L for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC concealed conduit /surface conduit with all accessories if require such as bends, reducers, spacers, saddles, junction boxes, Bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holder and light fittings etc) and MS pressed steel/cast iron sunken boxes( minimum thickness 1.2mm) of suitable size for mounting switches/bell pushes/sockets/fan regulator etc covered with new 3 mm thick laminated Bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch 6 Amp. |
| 106 | (b) One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch 6A complete all as specified and directed. |
| 107 | (c) One 5/6 Amp socket outlet independent controlled by one single pole 6 Amp switch complete all as specified and directed. |
| 108 | All as per Item No 105 mentioned here-in-before but one three pin 6/16 Amps socket outlet on the independent board with 2.5 Sqmm PVC insulated copper conductor and 2.5 sqmm copper conductor for continuous earthing complete all as specified and directed. |
| 109 | All as per item No 106 above but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed.(a) One light point/fan/bell point controlled by one single pole one way switch 6 Amp. |
| 110 | (b) One light point controlled by two 2-way switches 6 A, with cables 1.5 sq. mm size complete all as specified and directed. |
| 111 | (c) One 6 Amps socket outlet independent controlled by one single pole 6 Amp switch complete all as specified and directed. |
| 112 | S &F new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code.(a) 8\\" x 5\\" and Suitable for Main switch board |
| 113 | (c) All as per item No 112 but of size 5\\"x5\\" and Suitable for 05 Amp Independent board complete all as specified and directed. |
| 114 | S & F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only serviceable switchs/socket by making slots on new sheet complete all as specified & directed (a) Min size 8'' x 5\\" and Suitable for 15 Amp Independent board. |
| 115 | (c) All as per item No 114 but of Min size 5'' x 5\\" and Suitable for 05 Amp Independent board complete all as specified and directed. |
| 116 | S & F Switch piano flush type 6 Amps, one way complete all as specified and directed. |
| 117 | S & F Switch piano flush type 16 Amps, one way complete all as specified and directed. |
| 118 | S & F Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed. |
| 119 | S & F Socket outlet, 2 in 1, 6 pin 6 and 16 Amps piano flush type complete all as specified and directed. |
| 120 | S & F Switch piano flush type 6 Amps, two way complete all as specified and directed. |
| 121 | S & F in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and directed. |
| 122 | S & F in lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 9 W LED bulb complete all as specified. |
| 123 | S & F in repair stepped type electronic fan regulater (Socket/switch type), flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed |
| 124 | S & F in repair bell push piano flush type 6 Amps single pole complete all as specified and directed. |
| 125 | S & F in repair bell AC 230 volts single pole complete all as specified and directed. |
| 126 | S&F in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 127 | S&F in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and directed. |
| 128 | Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 129 | S&F in repair LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips |
| 130 | Supply & Fix in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed.Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length). |
| 131 | All as per item No 130 but 4 Sqmm Submain wiring complete all as specified and directed. |
| 132 | Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed. |
| 133 | S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender