Tender For Provn Of Inter Connection Of Drainage System, Toilet Block, Addn Altn To Water Drains And special Repair Replacement Of Ber Power Transformer And Other Misc Works Under Ge Mes Dehradun.
Tender Value
45.28 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
90560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Inter Connection Of Drainage System, Toilet Block, Addn Altn To Water Drains And special Repair Replacement Of Ber Power Transformer And Other Misc Works Under Ge Mes Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed |
| 3 | Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate)as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc.6m mean radius built in cm 1:6 complete all as specified and directed. |
| 5 | Material and labour for brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) complete all as specified and directed. |
| 6 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm inany type of soil complete all as specified and directed. |
| 7 | Removing excavated material n. exc 50m & depositing where directed at a level n.exc.1.5m above the starting point.complete all as specified and directed. |
| 8 | Material and labour for PCC 1:2:4, type B-0, 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork with using WPC @2% by weight of cement complete all as specified and directed. (Note:- WPC shall be measured and paid separately under respective item as \\"Supply only\\". |
| 9 | Supply only integral waterproofing compound (Powder) complete all as specified and directed. |
| 10 | Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed |
| 11 | Material and labour for rendering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed . |
| 12 | Material and labour for two coats of oil bound distemper over a coat of 2mm thick wall putty to newly plastered surface including preparation of surfaces complete all as specified and directed |
| 13 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed. |
| 14 | Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed by Engr-in-Charge. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. |
| 15 | Material and labour for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub bases of floor as specified and directed. |
| 16 | Material and labour for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub bases of floor complete all as specified and directed. |
| 17 | Supply and fixing of mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 18 | Supply and fixing of mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,complete all as specified and as directed. |
| 19 | Supply and fixing of mild steel TMT bar 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,complete all as specified and as directed. |
| 20 | Material and labour for RCC 1:2:4 B1 type 20 mm graded aggregate foundations, including rafts, footings, foundation beams; ; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed. |
| 21 | Material and labour for RCC1:2:4 type B1 using 20 mm graded mechanically crushed stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span etc complete all as specified and directed. |
| 22 | Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 23 | Material and labour for use and waste of formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work of fair finished flat surface of concrete complete all as specified and directed. |
| 24 | Material and labour for machine cut kota stone slab flooring 18-20 mm thick over cement screed 15mm thick in cement mortor 1:3 jointed with grey cement slury @ 3.0 Kg/Sqm mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 25 | Material and labour for machine cut kota stone slab skerting flooring 18-20 mm thick over cement screed 15mm thick in cement mortor 1:3 jointed with grey cement slury @ 3.0 Kg/Sqm mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | Supply and fixing of, Pre- painted galvanium aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and as directed. |
| 27 | Supply and fixing of, Pre- painted galvanium aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and as directed. |
| 28 | Supply and fixing of rolled mild steel sections confirming to Fe 410 - W (grade E 250 Quality)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed . |
| 29 | Material and labour for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coats of synthetic enamel paint (Ist quality)over a coat of red oxid primer complete all as specified and directed |
| 30 | Supply and fixing of powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately) |
| 31 | Supply and fixing of powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed. Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) |
| 32 | Supply and fixing of mild steel, plain black sheet of 0.63 mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 33 | Supply and fixing of 100 mm size butt hinges of medium weight cold rolled mild steel complete all as specified and directed. |
| 34 | Supply and fixing of 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed. |
| 35 | Supply and fixing of aluminum anodized barrel tower bolt 150mm long of extruded section complete all as specified and directed. |
| 36 | Supply and fixing of 150 mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 37 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 3.0 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 38 | Demolition of brick work or stone boulder masonary built in cement morter complete all as specified and directed. |
| 39 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 40 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 41 | Materials and labour for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed. |
| 42 | Materials and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 43 | Material and labour for PCC 1:2:4 type B1 (using 20 mm graded mechanically crushed stone aggregate) as in coping, benching, kneelers, apex stone, bed plates, kerbs, etc including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as specified and directed |
| 44 | Supply and fixing of factory made 50mm to 65 mm RCC manhole cover size (0.45x0.90M /0.45 x1.2 M) of required size and shape covers from site complete all as specfied and directed. |
| 45 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 46 | Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring, complete all as specified and directed. |
| 47 | Material and labour for providing and laying factory made PVC moulded, dark red/yellow coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed. |
| 48 | Material and labour for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 49 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc.6m mean radius built in cm 1:4 complete all as specified and directed. |
| 50 | Material and labour for preparation of new or previously untreated concrete surfaces of walls, kerb stone including and the like and applying two coats of synthetic enamel paint over a coat of exterior grade primer complete all as specified and directed. |
| 51 | Supply and fixing in repair of 110 mm bore PVC (SWR) pipe pressure 4Kgf/cm2 single socketed in any length with rubber ring fixed to wall/ laid in trenches complete all as specified and directed. |
| 52 | Material and labour for glazed ceramic tiles coloured 450 x 300mm, 7 to 8 mm thick, set and jointed on vertical surface in neat cement slurry @3Kg/sqm and pointed in white or colour cement to match etc over and including rendering 10mm thick on other than fair face of brick work surfaces in CM 1:3, complete all as specified and directed |
| 53 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 54 | Material and labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to foRunning meter grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, complete all as specified and directed. |
| 55 | Supply and fixing of aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mmPanel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design |
| 56 | Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 57 | Supply and fixing 30 mm thick WPC factory made 100% solid flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 58 | Supply and fixing of stainless steel sliding door bolts 'bolt type' 300 mm size stove enamelled black with and including 6 nuts and bolts, complete all as specified and directed. |
| 59 | Supply and fixing of stainless steel barrel tower bolts 200 mm size, stove, with bright bolt, complete all as specified and directed. |
| 60 | Supply and fixing of stainless steel handles 150 mm size complete fixed complete all as specified and directed. |
| 61 | Supply and fixing of 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed. |
| 62 | Supply and fixing of 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed. |
| 63 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good existing surface, cutting not exc 10 cm girth in brick walls etc complete all as specified and directed. |
| 64 | Supply and fixing of 75 mm bore PVC (SWR) Soil, waste and vent pipes ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors.complete all as specified and directed. |
| 65 | Supply and fixing of 110 mm bore PVC (SWR) Soil, waste and vent pipes, ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors/walls.complete all as specified and directed. |
| 66 | Supply and fixing of 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement ( ISI Marked) complete all as specified and directed. |
| 67 | Supply and fixing of PVC bend any radius 110mm bore with access door complete all as specified and directed. |
| 68 | Supply and fixing vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc, complete all as specified and directed. |
| 69 | Supply and fixing of vitreous china wash down water closet pan (pedestal pattern) white and trap including connection to drain flush pipe and anti syphonage pipecomplete all as specified and directed. |
| 70 | Supply and fixing PVC valveless syphonic action type flushing cistern low level 10ltrs capicty white, fixed with new brackets complete all as specifed and directed. |
| 71 | Supply and fixing of urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes with Urinal partitions slabs terminating about 40cm above floor line and grating as specified and directed. |
| 72 | Supply and fixing of pillar taps,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 73 | Supply and fixing of CP Grating doom 100 mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed. |
| 74 | Supply and fixing of PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed. |
| 75 | Supply and fixing of CP toilet paper holder with flat recessed type stainless steel fixed to wall with CP brass screw complete all as specifed and directed. |
| 76 | Supply and fixing of health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed. |
| 77 | Supply and fixing of brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed. |
| 78 | Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including aluminium alloy bracket and guard rail complete all as specified and directed. |
| 79 | Supply and fixing of 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified and directed. |
| 80 | Supply and fixing of 15mm bore dia fancy type, chromium plated angle valves, cast copper alloy,screwed down,high pressure, with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 81 | Supply and fixing of PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank complete all as specified and directed. |
| 82 | Supply and fixing of gun metal globe gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 83 | Supply and fixing of gun metal globe gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender