Tender For Repair/Replacement Of Misc Work From Water Gate To East Gate Outside Vijay Durg Under Ge(Fw) Kolkata
Tender Value
29.50 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
5 days left
EMD
59000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Misc Work From Water Gate To East Gate Outside Vijay Durg Under Ge(Fw) Kolkata
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | CORRIGENDUM | BOQ | 22-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed by the Engineer-in-Charge. |
| 2 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 3 | S&F in repair 25mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement morter 1:4 as in repair, complete all as specified and as directed. |
| 4 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, haking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 5 | M&L for brick work with flyash bricks straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 6 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 7 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 8 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 9 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 10 | M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 11 | Dismantling posts or struts (wood,steel,or RCC) any section ,including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and directed. |
| 12 | Dismantling of fencing,wire mesh any type complete all directed by Engineer - in -Charge. |
| 13 | Excavating in post holes hard / dense soil (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in any type of soil. |
| 14 | M&L PCC 1:3:6 type C2(Using 40 mm graded aggregate) in Foundation, filling and mass concrete complete all as specified and directed |
| 15 | Mild steel work as in post and struts in fencing including cutting tops to shape as diredcted,drilling holes, notching for wire,etc ,flat iron fillets for securing wire mesh etc,including all necessary drilling,bolting or riveting,etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed |
| 16 | Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed |
| 17 | S &F MS screw bolt (machine made with hexagonal or square head at one end and screwed the other end with washers 12 mm dia and n exc 5 cm long ) complete all as specified and directed |
| 18 | S & F 4 mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50 x 50 mm fixed with straining bolts including line wire any mesh size and type to any type of standarads, rails,straining bolts etc. including provision of binding wire, complete all as specified and as directed. |
| 19 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc after necessary repair (each line wire to be measured) ,incl taking down,complete all as specified and directed. |
| 20 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer, including preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described. |
| 21 | M&L for preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of Aluminimum red oxide primer complete all as specified and directed. |
| 22 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 23 | M&L for 100 mm thick PCC 1:3:6 type C-2 40mm graded aggregate finished complete all as specified and as directed. |
| 24 | M&L for 25 mm thick in cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished without using extra cement all as specified as directed. |
| 25 | Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed . |
| 26 | Supply and fixing 25mm thick pre-polished coloured chequered concrete tiles of size 300mmx300mm, as in flooring over 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed. |
| 27 | M&L for 25 mm thick pre polished coloured chequred tiles of size 400X400/450x450 jointed and pointed in neat cement slurry with white or coloured to match including over 20 mm thick screed bed CM 1:6 completed all as directed. |
| 28 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 29 | S&F 15mm thick pre-polished decorative cement concrete tree gaurd tiles of approved size, design and colour laid on vertical surfaces over 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed. Make: Multiwyn/Ultra or equivalent. |
| 30 | M&L for 20mm thick coloured granite ,machine cut as in vertical surfaces such as skirting/dado over 10mm thick backing layer in cement mortar (1:3) , set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed. |
| 31 | M&L20mm thick coloured granite ,machine cut as in steps,jambs, pillars, window cills, cooking platforms and on floor over 20mm thick backing layer in cement mortar (1:6) , set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed. |
| 32 | M&L for Machine cut Kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid on floor over and including 20mm thick backing layer in cement mortar (1:6) complete all as specified and as directed. |
| 33 | Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo,granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed. |
| 34 | Material and labour preparation of old brick/stone/concrete wall surfaces of any description over 10cm width or girth and applying one coat of synthetic enemal paint complete all as specified and as directed. |
| 35 | Material and Labour for applying 1.0 mm thick wall putty on old/new surface of wall and complete all as directed. |
| 36 | M&L Preparing new Surfaces of Walls and applying two Coats of Cement Base Paint over one coat of cement primer, complete all as specified and as directed. |
| 37 | M&L preparation and complete removal of old existing treatment of old Surfaces of Walls and applying two Coats of Cement Base Paint, complete all as specified and as directed. |
| 38 | Material & Labour complete removal of old surface of walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed.( any height bldg ) |
| 39 | Material & Labour preparation of old surface of walls/ Floor applying one coats of 100% Premium acrylic emulsion paint ( terracoat colour or any type of colour ) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed. (up to any high of building) |
| 40 | M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed. |
| 41 | Removal and desposal of waste material/debries/sludges/soil from any location at FW camp area to out of MOD Land. complete all as specified and as directed by Engr-in-charge. Note : Volume of each tipper/ Job should not be less than 4 cum |
| 42 | M & L in repair Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 450 mm as in drain cover with capcity 5MT all as specified and directed. |
| 43 | M & L in repair Providing precast reinforced cement concrete RCPC drainn cover 100 mm thick of size 600mm x 450 mm as in drain cover with capcity 5MT all as specified and directed. |
| 44 | Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender