Tender For Repairs/Replacement Of Cupboard, Kitchen Cabinets And Other Associated Work At Darjipura Afs Baroda
Tender Value
25 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
3 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Replacement Of Cupboard, Kitchen Cabinets And Other Associated Work At Darjipura Afs Baroda
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the fram) all as speified and as directed. |
| 2 | Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the fram) all as speified and as directed. |
| 3 | Taking down shutter only of any description exc 1Sqm n. exc 2Sqm and removing all as speified and as directed. |
| 4 | Taking down shutter only of any description n exc 1Sqm and removing all as speified and as directed. |
| 5 | Taking down Shutter exc 1 sq. m but n exc 2 sq. m each and refixing in the same opening inc all necessary bolts, screws etc. complete all as specified and directed |
| 6 | S&F 2nd class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 7 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc |
| 8 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beeds complete all as directed. |
| 9 | Repair to Wooden door, Pannelled doors by removing and refixing broken/damaged styles, top, bottom, lock rails and making good by application of necessary oil paint over primer all as specified and direcetd. |
| 10 | Repair to cupboard Shutters by dismantling the existing shutter, attending repairs including tightening/adjustment or replacement of damaged hinges, realignment of shutters, refixing in position complete, ensuring smooth operation,including all labour,tools and minor materials and making good by application of necessary oil paint over primer all as specified and direcetd. |
| 11 | Repair to kitchen cabinate Shutters by dismantling the existing shutter, attending necessary repairs including tightening/reair/replacement of damaged butt/piano hinges, kobs,handles and magnetic/ball catches, realignment of shutters, refixing in position complete, ensuring smooth operation,including all labour,tools and minor materials and making good by application of necessary oil paint over primer all as specified and direcetd. |
| 12 | Repair to Pvc door shutter and frame by dismantling the existing shutter, attending necessary repairs including tightening/reair/replacement of damaged hinges and fixed to frame and wall/tiles , and making surface good all as specified and direcetd. |
| 13 | M&L 2nd class hard wood Factory Made 35mm thick Plain framed, panelled shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge. |
| 14 | M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engg. In Charge. |
| 15 | All as per item No 09 above but 30mm thick. All as directed. |
| 16 | S&F Factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. |
| 17 | M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter all as specified and as directed.. |
| 18 | S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 19 | all as per item above but fixed in repair |
| 20 | S&F Sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as directed. |
| 21 | S&F 5mm thick tinted glass fixed to wooden/ aluminium joinery complete all as specified and directed. |
| 22 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete |
| 24 | S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding comlete.. |
| 25 | S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed |
| 26 | S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed. |
| 27 | All as per item No 19 above but 150mm long all as directed. |
| 28 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. |
| 29 | S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F Powder coated aluminium work of Make : Jindal or equivalent for door, windows and ventilators and and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing (if required)etc complete all as specified and directed. |
| 31 | S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron door frames; ladders; framed balusters; walk ways ; railings framework or water tanks and similar work conforming to Fe 410-O of Fe 310-O |
| 32 | Providing and fixing Factory made 18 (+0.7) mm thck PVC sheet one sided pre laminated sheet cabinet shutter of density 600 Kg/cum bent at 90 degree and finished all edges at all levels, for making edges lipping/bedding or 0.5mm tick PVC Sheet lipping at all four edges using bonding tape etc. complete all a per Manufacturer's |
| 33 | S & F in repair 18/19 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination INCL beeding, fixed with screws to timber frame work |
| 34 | S & F in repair 12 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work |
| 35 | M&L for 18 mm thick plywood,grade BWP, type BB, fixed with screws to timber frame work complete all as specified and directed. |
| 36 | M&L for 0.9mm thickness Sunmica decorative laminate type 1 of surface finish, colour and pattern as approved ,fixed with approved athesive as per manufacturer,s instruction complete all as specified and directed. |
| 37 | S & F for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed. |
| 38 | S & F for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 3 sqcm but not exc. 6 sqcm complete all as specified and directed. |
| 39 | S&F SS W Hinge SS 202 Grade Rust Resistant of size 3''/4'' thicknes 1.5mm suitable for 18mm thickl cupboard shutters. |
| 40 | S&F Auto SSHinges 304 grade of crank 0 degree to 90 degree fixed with screw to pvc sheet and frame complete all as spd and directed |
| 41 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (When open) in 40 mm fixed in repairs. |
| 42 | S&F 100mm size brass handles, cast type, polished bright complete all as specified and directed. |
| 43 | S&F Powder coated aluminium decoratibve profile handle 20\\" long all as spd and directed |
| 44 | S & F in repairs 40mm brass Knob (mini round handle) for drawer (of kitchen CB/books shelfs) . |
| 45 | S & F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed. |
| 46 | S & F Hasp 100mm Hasp and staple, almunium anodised , wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 47 | M&L for PCC 1:2:4 type B-0 (12.5 mm graded aggregate) as in lintel upto 1.5m clear span,cill,steps,plinth course,parapets, coping complete all as specifies and diredted. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 49 | Material and labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 50 | Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar. |
| 51 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 15mm thick screed bed in CM 1:4 including cutting space for sink & gas pipe hole all as specified and directed. |
| 52 | M&L Machine cut Pre polished kota stone slab flooring 20-25 mm thick over and incl 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase etc. |
| 53 | Rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement |
| 54 | S & F in repair sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixinf cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 55 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes;including bedding in cementmortar on to dwarf wall or including fixing cantilever bracketsand connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 56 | Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and as directed. |
| 57 | M&L Framed work ( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete all as specified and as directed |
| 58 | M&L for Anti Termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 59 | M&L for Anti termite treatment to existing verticle masonry/concrete surface by drilling hole 12 mm dia at an inclination of 45 degree to the wall face at 150 mm centre to centre in staggered pattern to the require depth injecting aprroved chemical emulsion (Chlorphyrifos 20% EC @1 % emulsion or equivalent aprroved termicide) under pressure until refusal, plugging the holes with cement mortar (1:3) making good the didtrubed surfaces complete all as directed by EIC. |
| 60 | S&F in repairs aluminum (extruded section) door closer hydraulically regulated designation No-1 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 61 | S & F in repair 25mm dia Stainless steel curtain drapery rod decorative type cut to length and fixed complete all as specified and directed by Engr-in- Charge. |
| 62 | S&F bracket suitable for 25 mm dia stainless steel curtain rod complete all as specified and directed. |
| 63 | S&F in repair SS plate rack 0.63 mm thick of size 31\\"x36\\"x101\\" in SS 304 grade all as specified and directed. |
| 64 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation of surfaces, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete. |
| 65 | M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer. |
| 66 | M&L Preparing new plastered surface. and applying two coats Oil Bound distemper over one coat of primer complete all as specified and directed. |
| 67 | S&F in repair Box type auto hinges double action spring hinges, mild steel with steel wire spring, stove enamelled, black of any degree as per direction of Engr-in Charge complete all as specified and directed. |
| 68 | S&F in repair stainless steel modular kitchen channel of any size including necessary joints,roller,cleats ,screws,nut and bolts as per direction of Engr-in Charge complete all as specified and directed. |
| 69 | S&F in repairs brass mortice lock, vertical type, 4 lever, size 100mm and all as specified and directed. |
| 70 | S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 71 | S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 72 | M&L cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. one brick but n. exc. two brick thick wall making good dismantled portion in cement mortar in (1:3) or PCC (1:2:4) type B1 as specified. |
| 73 | M&L for providing cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate lto fill the Steel frame complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair mild steel rolling shutter (with 1.25 mm thick laths) with out ball bearing as specified incl top cover, anchoring rod,hasp and staple and shop coat of primer erected in position, gear operated type with bevel gear box and crank handle complete all as spd and directed. |
| 75 | M&L for oiling/greesing of rolling shutter,repair of ball bearing for rolling shutter/ repair of rolling system and to made smooth function etc all as specified and directed |
| 76 | S&F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. |
| 77 | S&F in repair swan neck pillar taps cast copper alloy with capstain head, CP, screwed down high pressure with or without lettered \\"hot or cold\\" with long screwed shank and fly nuts for iron pipes 15mm bore, complete all as specified and directed. |
| 78 | S&F in repair 32mm dia PVC flexible waste pipe for WHB/sink, length 60 to 100 cm, complete all as specified and directed. |
| 79 | S&F in repair 150 x 150 stainless steel grating fixed on floor / nahani trap, complete all as specified and directed. |
| 80 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 81 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 82 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 83 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Please Enable Macros to View BoQ information |
| 84 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender