Tender For Certain Repair To Footpath, Interlocking Tiles, Kerb Stone And Road Furniture Under Age B/R-Ii Of Ge (N) Mamun
Tender Value
48 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Footpath, Interlocking Tiles, Kerb Stone And Road Furniture Under Age B/R-Ii Of Ge (N) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete un-reinforced of any description and in any position complete all as specified and directed |
| 2 | Material & labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio (1:2) by weight complete all as specified and directed. |
| 3 | M&L for 75mm thick PCC 1:4:8 Type D2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub bases, floors and pavings etc complete all as specified and as directed. |
| 4 | M&L for factory made cement concrete coloured chequered tile of size 300x300x25 mm machine pressed (using vibro compaction method) with 3mm to 5 mm thick topping in white cement and non fadeable glossy pigment (using rubberised moulded, glossy finish) set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 etc complete all as specified and directed. |
| 5 | M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and directed. |
| 6 | M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 80mm thick grade of concrete M-40 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and directed. |
| 7 | M&L for sand filling in floors or paving including levelling, watering and consolidation complete all as specified and as directed. |
| 8 | M&L for 100mm thick Precast Cement Concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) (with plain or interlocking joints as directed) as in road side kerb stone chamfered on edges and setting in CM 1:4, including demolition and removing materials out side MoD land & etc complete all as specified and directed |
| 9 | Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris out off the premises etc complete all as specified and directed. |
| 10 | M&L for Brick work with fly ash bricks (Non modular), sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. |
| 11 | All as per Srl item No 10 here-in-above but except bricks (using old servicable bricks) complete all as specified & directed. |
| 12 | Dismantling of brick work (of brick works (laid flat or on edge) in channels or drains, laid, bedded. jointed and pointed in any mortar including separating serviceable bricks aside for reuse in the work complete all as specified and directed. |
| 13 | M&L for Brick work with fly ash bricks, laid on in side vertical surfaces of drains, bedded & jointly in built in CM (1:4) complete all as specified and directed |
| 14 | All as per Srl item No 13 here-in-above but except bricks (using old servicable bricks) complete all as specified and directed |
| 15 | M&L for brick work with fly ash bricks, laid on edge on top with width equal to the length of brick surfaces of drains, bedded & jointly in cement mortar (1:4) complete all as specified and directed. |
| 16 | All as per Srl item No 15 here-in-above but except bricks (using old servicable bricks) complete all as specified and directed |
| 17 | M&L for racking out loose brick work joints as in inside vertical inclined surfaces of bricks drains, laid 10 S flat and flush pointed the same in cement mortar (1:4) complete all as specified and directed. |
| 18 | M&L for racking out loose brick work joints as in top horizontal surfaces of bricks drains, laid on edges flush pointed in cement mortar (1:4) complete all as specified and directed. |
| 19 | M&L cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 20 | Extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 21 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 22 | M&L for 15mm thick cement plaster in CM 1:4 on brick masonary surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 23 | M&L for three coats of white wash on new plastered surface of wall including preparation of surface etc complete all as specified & directed. |
| 24 | M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 25 | M&L for applying two coats of premium acrylic emulsion exterior paint of required shade over one coat of exterior primer applied over new surfaces of kerb stones etc all as specified and directed. |
| 26 | M&L for preparation of old surface and applying one coat of exterior emulsion paint Ist quality on wall, kerb stone, etc complete all as specified and directed. |
| 27 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, rubbish off the premises complete all as specified and directed. |
| 28 | M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/fromwork set in cement mortar (1:6) complete all as specified and directed. |
| 29 | S&F Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 30 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing unserviceable asbestos cement sheets including ridges complete as specified and directed |
| 31 | S&F Pre-painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing unserviceable asbestos cement sheets including ridges complete as specified and directed |
| 32 | S&F steel work in tubular trusses MS pipes in vertical column, rafter, parlins complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 or IS-4923 of 1968 grade st 240 complete all as specified and directed by Engr-In-Charge. |
| 33 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete including taking out embedded portion, making good disturbed ground and removal of rubbish complete all as specified and directed. |
| 34 | Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps etc complete all as specified and directed. |
| 35 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc50m and making good surface (Soft/loose soil) complete all holes as specified and directed. |
| 36 | S&F mild steel frame work as in fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. complete to similar work conferming to Fe-290 Gde E-165 complete all as specified and directed. |
| 37 | M&L for cement concrete in foundation, filling and mass concrete type C-2,1:3:6 (using 40mm graded crushed stone aggregate) as in foundation and as PC band at ground level to hold bottom line of chain link fencing wire to cover gap complete all as specified and directed |
| 38 | Supply only 4.00 mm dia, galvanized steel wire chain link fencing 50mm x 50 mm mesh, including binding wire / line wire etc complete all as specified and as directed. |
| 39 | Fixing only 3.15 mm dia, galvanized steel wire chain link fencing 50 mm x 50 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire, Mild steel round bar etc complete all as specified and directed. Note :- Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat iron, Nuts, Bolts & Washers will be measured and paid for separately. |
| 40 | S&F for flat iron fillets for securing chain link/wire mesh including all necessary drilling, bolting or riveting etc, conforming to Fe-290, Gde E-165 complete all as specified and directed |
| 41 | S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end, screwed the other or screwed both ends. Each screwed end to be fitted with two washers and one hexagonal or square nut exc 5 cm but not exc 10cm long (dia of shank 10mm) complete all as specified and directed. |
| 42 | S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia wire at 75 mm spacing, straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with galvanized mild steel wire staple or steel pins complete all as specified and directed. Note: Each line of wire to be measured separately. |
| 43 | All as per item No 42 here-in-above but except barbed wire (using old serviceable wire retrieved from dismantling) with restraining resecuring including making good staples etc.complete all as specified and directed. Note: Each line of wire to be measured separately. |
| 44 | M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 45 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290 Gde-E-165 including dismantling of existing steel work complete all as specified & directed. |
| 46 | M&L for 17-18mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of old stones/tiles complete all as specified and directed. |
| 47 | Dismantling of reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required and removal complete all as specified & directed. |
| 48 | Providing precast cement concrete type B1, 1:2:4, (using 20mm graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat-ing etc. and setting in mortar CM 1:4 complete with joints to complete all as specified and directed. |
| 49 | M&L for 150 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 50 | M&L for 200 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 51 | M&L 200mm thick concrete bed to drain pipes including forming cadles in cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) of over pipes complete all as specified and directed. |
| 52 | M&L 150mm thick concrete bed to drain pipes including forming cadles in cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) of over pipes complete all as specified and directed. |
| 53 | S&F of precast cement concrete Type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and demolition of old jallies, removal of rubbish complete all as specified & directed. |
| 54 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions all specified and directed. |
| 55 | M&L for 2.5mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra cross etc. on roads, pavements and the like etc with thermoplastic road marking paint @ 5 Kg/Sqm and applying glass grit @ 300 gms/Sqm over painted surfaces while the painting surfaces are hot including cleaning surfaces complete all as specified and directed.Note: Both application shall be carried out through mechanical application by the approved applicator of manufacturer of paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender