Tender For Addn/Altn To Cook House And Provn Of Three Tier Washing System At Dsc Mess At Af Station Chimney Hills
Tender Value
14.97 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Cook House And Provn Of Three Tier Washing System At Dsc Mess At Af Station Chimney Hills
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out complete all as specified and as directed. |
| 2 | Hard core of gauge not exceeding 63mm deposited spread and level in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 3 | Returning , filling in excavated soil including spreading , Leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed |
| 4 | Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. |
| 5 | Material & Labour for treating the bottom and side of excavation for anti-termite treatment at the rate of 5 Ltrs of emulsion per SQM of surface area complete all as specified and as directed. |
| 6 | Material & Labour for treating the soil under the plinth protection for anti-termite treatment at the rate of 5 Ltrs of emulsion per SQM of surface area complete all as specified and as directed |
| 7 | Material & Labour for treating the soil under the existing floors for anti-termite treatment using emulsion @ one litre per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortor 1:2(1 cement:2 coarse sand) to Match the existing floors complete all as specified and as directed |
| 8 | Material & Labour for cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) cills; copings, benching to man hole and drain and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed |
| 9 | Material & Labour for Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 10 | Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc.,as specified and as directed . |
| 11 | Material & Labour for cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) cills; copings, benching to man hole and drain and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed |
| 12 | Material & Labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and backing filling like complete all as specified and as directed . |
| 13 | Pre-cast cement concrete 1:3:6 type C1 usnig 20mm graded crushed stone aggregate block masonry with solid blocks, exceeding 10 cm in width and setting in mortar 1:6 complete as specified and as directed . |
| 14 | Taking down chowkhats or frames without taking off shutters from the frames not exceeding 1.5 sqm each as specified and as directed . |
| 15 | Taking down chowkhats or frames without taking off shutters from the frames exceeding 1.5 sqm and not exceeding 4 sqm each as specified and as directed . |
| 16 | Takin down shutters of any description exceeding 1.0 sqm but not exceeding 2 sqm complete as specified and as directed . |
| 17 | Supply & Fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed. |
| 18 | Supply & Fixing for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 19 | Supply & Fixing for flush shutters 35mm thick,solid coreconstructions,with block board core and ply wood face panels,commercial type on both sides complete all as specified and as directed. |
| 20 | Supply & Fixing for Butt hinges, medium weight cold rolled mild steel 75 mm in size complete all as specified and as directed.. |
| 21 | Supply & Fixing for Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.. |
| 22 | Supply & Fixing for Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length complete all as specified and as directed.. |
| 23 | Supply & Fixing for Aluminium handles, cast type 100 mm in size complete all as specified and as directed.. |
| 24 | Supply & Fixing for Butt hinges, medium weight cold rolled mild steel 100 mm in size complete all as specified and as directed.. |
| 25 | Supply & Fixing for Aluminium alloy, anodised, sliding door bolt 250 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.. |
| 26 | Supply & Fixing for Aluminium anodised, barrel tower bolts of extruded section, 200 mm in length complete all as specified and as directed.. |
| 27 | Supply & Fixing for Aluminium handles, cast type 150 mm in size complete all as specified and as directed.. |
| 28 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 29 | Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 30 | Supply & Fixing for MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 31 | Supply & Fixing for Rolled sections as in main and cross beams, hip and jack rafters; purlins, channels where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate Fe-410-W(Gde E-250)quality B complete all as specified and directed. |
| 32 | Supply & Fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 33 | Supply & Fixing for pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 34 | Supply & Fixing for Plain, Aluminium sheeting, Alloy 31000 H4 0.56mm thick in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 35 | Material & Labour for chequered cement concrete tiles 200 x 200 x 25 mm thick,in floors etc .seta and jointed in neat cement slurry and pointed in grey cement and pigments complete all as specified and directed. |
| 36 | Material & Labour for 75mm thickness PCC type C-2 (1:3:6) (40mm graded agg) as in plinth protection, sub base etc complete all as specified and as directed. |
| 37 | Material & Labour for 100mm thickness PCC type D-2 (1:4:8) (40mm graded agg) as in flooring complete all as specified and as directed. |
| 38 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises. |
| 39 | Material & Labour for Dark shade/ coloured vitrified double charged ceramic tiles 10 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed |
| 40 | Material & Labour for non skid vitrified double charged, coloured tiles 9 to 10 mm thick (square/ rectagular) area of each tile exceeding 0.36 sq m but not exceeding 0.42 sqm , as in skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 41 | Material & Labour for glazed ceramic coloured tiles (premium quality) 450x350 or 350x250 x6-7mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10 mm thick cement plaster in CM 1 :4 complete all as specified and directed. |
| 42 | Material & Labour for 50mm average thickness cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate), on RCC roof slab complete all as specified and as directed |
| 43 | Taking down plaster in cement mortor of any thickness complete all as specified and directed. |
| 44 | Material & Labour for 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 45 | Material & Labour for Rendering 15mm thick CM (1:4) on stone masonry surfaces or surface other than fair face of brick work or concrete surfaces mixing integral water proofing compound @ 3% by weight of cement finshed even without using extra cement all as speciied and as directed . NOTE :- water proofing compound will be measured and paid seperately. |
| 46 | Material & Labour for Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces of cement finshed even and smooth without using extra cement all as speciied and as directed . |
| 47 | Material & Labour for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed complete all as specified and as directed |
| 48 | Material & Labour for prep of newly plstered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed complete all as specified and as directed |
| 49 | Material & Labour for preparing old decorated surfaces of walls and applying two coats of oil bound distemper on internal walls surface complete all as specified and as directed.. |
| 50 | Material & Labour for preparing old decorated surfaces and applying two coats of white wash on ceilings complete all as specified and as directed. |
| 51 | Material & Labour for preparing old decorated surfaces and applying two coats of anti fungal weather proof paint on external wall surfacecomplete all as specified and as directed. |
| 52 | Material & Labour for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 53 | Material & Labour for preparation of old decorated steel surfaces of any description over 10 cms width or girth, and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 54 | Material & Labour for preparation of old decorated wooden surfaces of any description over 10 cms width or girth, and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 55 | Supply & Fixing for PVC (SWR) bends 110mm dia with access door any radius complete all as specified and as directed. |
| 56 | Supply & Fixing for PVC (SWR) junction single, 110mm dia with access door (Single T) equal or unequal complete all as specified and as directed. |
| 57 | Supply & Fixing for PVC (SWR) bends 75mm dia with access door any radius complete all as specified and as directed. |
| 58 | Supply & Fixing for PVC (SWR) junction single, 75mm dia with access door (Single T) equal or unequal complete all as specified and as directed. |
| 59 | Supply & Fixing for PVC (SWR) gully traps 125 /110mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 60 | Supply & Fixing for PVC (SWR) floor trap, 75mm dia outlet plain with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 61 | Supply & Fixing for PVC (SWR) pipes 110mm dia single socketed any length, fixed to wall complete all as specified and as directed.. |
| 62 | Supply & Fixing for PVC (SWR) pipes 75mm dia single socketed any length, fixed to wall complete all as specified and as directed.. |
| 63 | Supply & Fixing for PVC (SWR) vent cow 110mm dia complete all as specified and as directed. |
| 64 | Supply & Fixing for vitreous china wash down water closet pedestal pattern white with 'P' and 'S' trap and water closet seat cover including fixing bolts etc complete all as specified and as directed. |
| 65 | Supply & Fixing in repairs Vitreous China Wash Hand Basin, white, flat back, size 550 x400 mm incl CP waste coupling but excluding taps, waste , chain and plug and porcelain stopper including mild steel brackets fixed to wall with PCC type B-0, , including cutting for or pinning in a brackets complete al as specified and directed |
| 66 | Supply & Fixing for 10 ltrs capacity PVC Flushing cistern high level/low level with inlet, ball valve, float, handle incl fiting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the exisging fittings complete all as specified and as directed. |
| 67 | Supply & Fixing for 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified and as directed. |
| 68 | Supply & Fixing for PVC waste pipe for 32mm dia for Wash basin with PVC reducer of size 60mm long complete all as specified and directed. |
| 69 | Supply & Fixing for PVC connection 15 mm size with PTMT nut of length 600 mm complete all as specified and as directed. |
| 70 | Supply & Fixing for repairs 15mm dia fancy type bib tap cast copper alloy capston head chromium platedscrewed down for iron pipe complete all as specified and as directed. |
| 71 | Supply & Fixing for 15 mm dia fancy type pillar tap cast copper alloy with capstan head , chorium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts scrwed for iron pipe and fixed complete all as specified and as directed. |
| 72 | Supply & Fixing for 20mm dia ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe all as specified and as directed by the Engr-in-Charge. |
| 73 | Supply & Fixing for CP soap dish fixed to wall complete all as specified and directed by the Engr-in-Charge.Make : ESSCO or equivalent make. |
| 74 | Supply & Fixing for CP toilet paper holder with flap, fixed to wall complete all as specified and directed by the Engr-in-Charge Make : ESSCO, parryware or equivalent |
| 75 | Supply & Fixing for CP 15 mm bore angular stop cock screwed iron pipe complete all as specified and as directed (Weight not less than 90 gms) Make: ESSCO, parryware or equivalent. |
| 76 | Supply & Fixing for CP floor gratings 150mm dia all as directed by the Engr-in-Charge |
| 77 | Supply & Fixing for 15mm bore mild steel galvanised steel tubing meadium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed |
| 78 | Supply & Fixing for rotational moulded polythene water storage tank 1000ltr capacity (culinderical vertical with closed top ) hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and as directed. |
| 79 | Supply & Fixing for 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 80 | Supply & Fixing for PVC (SWR) pipes 110mm dia single socketed any length, fixed to wall complete all as specified and as directed.. |
| 81 | Supply & Fixing for PVC (SWR) bends /Tee 110mm dia with access door any radius all as specified and as directed.. |
| 82 | supply and fixing factory made stainless steel (grade304 )three tier washing system over all size 2.4X0.80m with three nos bowls of size 0.70x0.70x0.70m with drainage system arrangement and stop valves and Upvc drain pipes 100 mm dia connected to grease trap complete all as specified and as directed by Engr-in-charge |
| 83 | Demolition of Cement concrete (Un Reinforced) ground floors and pavings Not exceeding 15 cm thick GL as and similar works complete all as specified and directed. |
| 84 | Demolition of brickwork or stone/boulder masonry work built in cement mortor complete all as specified |
| 85 | Demolition of stone slabs and tiles of any description or thickness in floors/aprons etclaid, bedded in and pointed in any mortor. |
| 86 | Demolition cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 88 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete as specified and directed. |
| 89 | Material & Labour for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded PVC Surface Box /Metal Concealed box of size 1.2 mm thickness concealed in walls with suitable Plastic/Sunmika outer cover with suitable screws for housing switches socket outlets fan regulators etc for one light point controlled by one , one way switch complete all as specified and directed |
| 90 | Material & Labour for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded PVC Surface Box /Metal Concealed box of size 1.2 mm thickness concealed in walls with suitable Plastic/Sunmika outer cover with suitable screws for housing switches socket outlets fan regulators etc for one ceiling fan / wall fan/ exhaust fan controlled by one , one way switch complete all as specified and directed |
| 91 | Material & Labour for Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded PVC Surface Box /Metal Concealed box of size 1.2 mm thickness concealed in walls with suitable Plastic/Sunmika outer cover with suitable screws for housing switches socket outlets fan regulators etc for one three point socket outlet 5 Amp controlled by one , one way switch on same board complete all as specified and directed |
| 92 | Material & Labour for Point wiring with 4 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl with multi stranded copper conductor drawn through and including suitable size Non metalic regid PVC conduit and all conduit accessories (concealed) and including provision of 4 sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated branded PVC Surface Box /Metal Concealed box of size 1.2 mm thickness concealed in walls with suitable Plastic/Sunmika outer cover with suitable screws for housing switches socket outlets fan regulators etc for 4 sqmm as earth conductor on independent board for 15 Amp Socket complete all as specified and directed |
| 93 | Supply and fixing for Piano switch 1 way 6A,Single pole ,one way with venner wood color plate all as specified and directed by engineer in charge . |
| 94 | Supply and fixing for Piano switch 1 way 16A,Single pole ,one way with venner wood color plate all as specified and directed by engineer in charge . |
| 95 | Supply and fixing for Socket outlet, 6 A - 3 pin with white color plate all as specified and directed by engineer in charge. |
| 96 | Supply and fixing for Socket outlet 2 in 1 6/16A , with white color plate all as specified and directed by engineer in charge. |
| 97 | Supply and fixing for ceiling rose 3 Phase / PVC/ Polycarbonate, isolated body,ISI Marked all as specified and directed by engineer in charge . |
| 98 | Supply and fixing LED lights fitting 1x 20W, 220V, Total 2000 Lumens ,luminuous efficacy 100 lumen/watt, AC decorative box type with driver, holder including retrofit LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 99 | Supply & fixing of 35/36 watts LED Security light fitting with pressure die cast IP 65 protection, luminous efficiency of 100 lm/watt, PF > 0.95, CRI > 80, colour temprature 5700 K suitable for primary roads with all connected accessories including bracket made out of GI tubing of 25mm light grade outer dia, 1.2m length,with GI clamps, nuts and bolts etc for fixing of fitting complete all as specified. |
| 100 | Supply and fixing for exhaust fan, Steel body AC single Phase. 230V of size 300 sweep,aerodymic design with four number of blades and frame and louvers all as per directed by engineer in charge . |
| 101 | Material & Labour for Submain Wiring for circuit/submain wiring alongwith earth wire with FRLS , PVC insulated copper conductor, single core cable in surface as required 2 x 4 Sqmm + 1 x 4 Sqmm earth wire with PVC Conduit 25 mm dia including old taking down all as specified and directed by engineer in charge . |
| 102 | Material & Labour for Submain Wiring for circuit/submain wiring alongwith earth wire with FRLS , PVC insulated copper conductor, single core cable in surface as required 2X2.5 sqmm+1 X2.5 Sqmm earth wire with PVC Conduit 25 mm dia including old taking down all as specified and directed by engineer in charge . |
| 103 | Supply & Fixing in replacement SPN distribution boards,8 Way, protection class IP-43 Double door suitable for mounting MCB's with min 100 Amps rating bus bar ,Concealed in wall including old taking down all as specified and directed by engineer in charge . |
| 104 | Supply and Fix RCCB, DP, 40 Amps AC type in accordance with IS:12640-1 and IEC-6100-1, suitable for 240 Volts, 50 Hz with 10 KA short circuit withstand capacity. |
| 105 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 106 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 107 | Making Hole for fixing of Exhaust Fan/Ventilation Fan 250 mm sweep on Hard Stone wall and Making Good disturbed surface with two coats of white wash all as per directed by engr in charge. |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender