Tender For Addn / Altn Of Water Through (Charrie) In C Ing Area In Zone-I Area At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
19320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn Of Water Through (Charrie) In C Ing Area In Zone-I Area At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Add to (or deduct from) srl item No. 02 above for every 3 cm or part thereof above or below 15 cm average depth complete all as specified and directed.Note : Item for rate adjustment only |
| 4 | M&L hardcore of Broken stones or Boulders of gauge n. exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed. |
| 5 | M&L for 100 mm thick PCC 1:4:8, type D-2(using 40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 6 | M&L for 100mm thick PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in flooring and all other similar works finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M & L coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and coloured pigment laid sand cushion layer of thickness as required on site complete all as specified and as directed.Note : Sand cushion shall be measured and paid seperately |
| 8 | M&L sand filling under floors or in foundations including watering, spreading and levelling in layers of 25 mm thick complete all as specified and as directed. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 10 | M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying non metallic, monolithic surface hardening compound for fresh concrete floor applied as per manufacturers direction for strengthing of concrete complete all as specified and directed. |
| 11 | M&L preparation of new concrete/ brick/stone surfaces of kerb stone of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint in approved colour and pattern complete all as specified and as directed. |
| 12 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 13 | M&L for brick work with sub-class 'B' bricks (old size), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 14 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 15 | M&L for rendering 15 mm thick in two layers, Ist layer 10 mm thick in CM 1:4 and IInd layer 5 mm thick in CM 1:4 incl mixing of WPC as per manufacturers instruction, on fair faces of brick masonary or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note : WPC shall be measured and paid seperately |
| 16 | Supply only integral water proofing compound complete all as specified. |
| 17 | M&L preparation of newly plastered surfaces of wall & applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & as directed. |
| 18 | Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. |
| 19 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender