Tender For annual repair maintenance Works At Fsd Nagpur For Year 2026-27 (Sh: Providing False Ceiling To Do Hall & Old Complex Qc Lab, Repairs To Rolling Shutters, Damaged Roof, Godowns, Ancillaries And Other Miscellaneous Repairs Including Pre & Po
Tender Value
43.77 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
6 days left
EMD
87560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair maintenance Works At Fsd Nagpur For Year 2026-27 (Sh: Providing False Ceiling To Do Hall & Old Complex Qc Lab, Repairs To Rolling Shutters, Damaged Roof, Godowns, Ancillaries And Other Miscellaneous Repairs Including Pre & Post Monsoon Repair Works,Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. :All kinds of soil. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. : In cement mortar |
| 5 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 6 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (Zone III) derived from natural sources): 8 graded stone aggregate 40 mm nominal size derived from natural sources). (Stone aggregate will be supplied by Deptt. free of cost ) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(Zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size) derived from natural sources) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 11 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (Zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and stringcourses etc. |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. : Cold twisted bars |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in foundation and plinths in all shapes and sizes in: Cement Mortar 1:6 (1Cement : 6 Coarse sand ) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement Mortar 1:4 (1Cement : 4 Coarse sand ) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement Mortar 1:6 (1Cement : 6 Coarse sand ) |
| 17 | Half brick masonry with common burnt clay F.P.S ( non modular) bricks of class designation 3.5 in foundation and plinth in : Cement Mortar 1:4 (1Cement : 4 Coarse sand ) |
| 18 | Providing and fixing 25 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels: Kadappa stone |
| 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge : :With cement mortar 1:4 (1cement: 4 coarse sand) |
| 20 | 6 mm cement plaster of mix : 1:6 (1cement : 3 fine sand) |
| 21 | 12 mm cement plaster of mix : 1:6 (1cement : 6 fine sand) |
| 22 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1cement : 6 fine sand) |
| 23 | Neat cement punning |
| 24 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate |
| 26 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 27 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: : 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 28 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. : For thickness of tiles 10mm to 25mm |
| 29 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge |
| 30 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 31 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 32 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours such as White ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 35 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size : Size of Tile 1200 x 1200 mm. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fiottings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in charge . Internal work- exposed on wall : 15 mm nominal dia pipes |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fiottings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in charge . Internal work- exposed on wall : 20 mm nominal dia pipes |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work 25 mm nominal dia pipes |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work 40 mm nominal dia pipes |
| 40 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 41 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 42 | Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete.: 15 mm nominal bore |
| 43 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore |
| 44 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality( Screwed end) 25 mm nominal bore |
| 45 | Providing and fixing on wall face unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion , .(i) Single socketed pipes. : 110 mm diameter |
| 46 | Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler : 110 mm |
| 47 | Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree: 110mm bend |
| 48 | Providing and fixing on wall face unplasticisd - PVC moulded fittings / accessories for unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Tyoe A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain): 110 mm Shoe |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 50 | Providing and fixing unplasicised P.V.C. connection pipes with brass unions.: 45 cm length, 15 mm nominal bore |
| 51 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550x400 mm |
| 52 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever ) conforming to IS: 7231, with all fittings and fixtures complete .: 10 lit capacity - white |
| 53 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 54 | Providing and fixing white vitreous china water closet squatting pan (Indian type): Orissa pattern W.C. pan of size 580x440 mm |
| 55 | Cleaning of terrace /loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brishes, duster etc. , removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.50 gm per litre capacity of tank , including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer -in- charge. ( The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) ( if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account): for first half year |
| 56 | Cleaning of terrace /loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brishes, duster etc. , removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.50 gm per litre capacity of tank , including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer -in- charge. ( The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) ( if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account): for second half year |
| 57 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-charge. The cleaning shall consist following operations :- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposists. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of R.C.C. internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultravoilet radiation etc. as per direction of Engineer - in -charge.: for first half year |
| 58 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-charge. The cleaning shall consist following operations :- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposists. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of R.C.C. internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultravoilet radiation etc. as per direction of Engineer - in -charge.: for second half year |
| 59 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 60 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 61 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 62 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black), comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. : With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles |
| 63 | Supplying and fixing G.I hard drawn steel wire fabric of mesh size 25 mm x 25 mm with wire diameter 3 mm size weighing not less than 4.54 kg/sqm as directed by Engineering In charge. |
| 64 | Cleaning of internal drains, Nallha Storm water drains etc. for smooth flow of water including disposal of rubbish outside the depot premises with all leads and lifts as per directions of Engineer in charge. |
| 65 | Cleaning of chambers /manholes of all sizes including horizontal pipes inside godowns and on platforms of godowns including getting out earth, rubbish etc,and disposal outside the depot premises in the authorised dumpimg ground for easy drain out of rain water from valley gutters and eaves gutters as per directions of Engineer-in-charge. |
| 66 | Cleaning of valley gutters along centre of godowns of old design at height about 18 feet by removing dust, earth etc, including disposal outside the depot premises in the authorised dumping ground for easy drainout of rain water as per directions of Engineer-in-charge. |
| 67 | Supply of skilled and unskilled labours to carry out the misc. works in depot premises, D.O. premises and staff quarters premises as and when required as per direction of Engineer-in- charge. Skilled labours average (Carpentar, mason, Blacksmith, Fitter, Plumber) |
| 68 | Supply of skilled and unskilled labours to carry out the misc. works in depot premises, D.O. premises and staff quarters premises as and when required as per direction of Engineer-in- charge. Unskilled labours ( Beldar, Coolie) |
| 69 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 70 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
| 71 | Repairing, servicing and over hauling of rolling shutters of all sizes including greasing, oiling, tensioning of springs also replacing the damaged parts of rolling shutters like laths, shafts, pulleys, side guides, bottom plates welding of locking hooks, handles etc. complete as required) so as to make its operation smooth through out the contract period . Necessary required parts for rolling shutters shall be supplied free of cost by department. Grease is to be arranged by the contractor. |
| 72 | Supply of springs of grade No. 2 of 27.5 cm length including loading, unloading and transportation at site and including all taxes etc. complete. |
| 73 | Repairing of roof godown with water proofing material such as Bitumen felt / bitumen/ tarplastic or any other water proofing material etc.approved by the Engineer in charge with including replacement of bitument washer and tightening of 'J' hooks & nuts wherever required (Details of cost for 5000 MT capacity godown) for full period of contract |
| 74 | Repair and maintenance of GI/Profile roof of godown with material such as silicon sealant, self driilling/self tapping screws of size 5.5 x 55 mm with EPDM seal, including greasing of turbo ventilators as and when required during the contract period complete as per the directions of Engineer-in-charge.(Details of cost for 5000 MT capacity godown) |
| 75 | Providing and fixing to existing door frames.30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 76 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase |
| 77 | Providing and fixing turbo ventilators of 22\\" dia as per the manufacturers specification with all accessories and as directed by engineer in charge. :Size - 22\\" stainless steel grade - 430, No. of outer wings - 24 (22\\"), No. of iner wings - 6 (22\\"), Fan Base - Nylon, Top & Bottom - stainless steel grade - 430, inside material - Nylon, Fan Blade OD - 600 mm, Nylon blade ring - 560 mm (for 22\\"), Total fan height - 360 mm (for 22\\"), Self lubricating bearing. Base sheet should be made of Poly carbonate sheet of 2 mm thick. |
| 78 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 79 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.I.Sheet |
| 80 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 81 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 82 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 83 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length (total length90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied withG.I. staples and G.I. clips to retain horizontal, including necessarybolts or G.I. barbed wire tied to angle iron, all complete as per directionof Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Springcore (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mmwith tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 84 | Grading roof for water proofing treatment with1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 85 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)Second class teak wood: 30 mm thick shutters |
| 86 | Credit for taking away dismantlled/ released materials on \\"AS IS WHERE IS BASIS\\" as per the direction of Engg. - in -charge.Rolling shutter old dismantled material such as spring, shaft, wheel etc |
| 87 | Credit for taking away dismantled/ released materials on \\"AS IS WHERE IS BASIS\\" & as per direction of Engg. -in - charge. G.S. sheets Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender