Tender For Running And Mtc.Of Rws Scheme In Sepahijala Dist./ Sh Providing And Fitting Fixing Of Starter Spare Parts And Other Electrical Accessories , Panel Board Under Boxanagar Rd Block With In The Jurisdiction Of Dws Sub-Division, Sonamura During
Tender Overview
Project Description
Tender for Running And Mtc.Of Rws Scheme In Sepahijala Dist./ Sh Providing And Fitting Fixing Of Starter Spare Parts And Other Electrical Accessories , Panel Board Under Boxanagar Rd Block With In The Jurisdiction Of Dws Sub-Division, Sonamura During The Year 2026-27 (Gr-2)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fitting , fixing 3 pole power contractor Type 415, 50 HZ ( L & T make) as per direction of the Engineer-in-Charge |
| 2 | ML 1.5 |
| 3 | ML 2 |
| 4 | Providing and fitting , fixing Bimetal overload relay Type ML series L & T make as per direction of the Engineer-in-Charge. (i)15-21 Amp |
| 5 | ii).20-32 Amp |
| 6 | Providing and fitting , fixing Std. operating coil for 415 V , 50 HZ, L & T make as per direction of the Engineer-in-Charge. (i) ML 1.5 |
| 7 | (ii) ML2 |
| 8 | Providing and fitting, fixing combination coil ML2 with Timer L & T make as per direction of the Engineer-in-Charge. |
| 9 | Providing & fitting, fixing Thermal Timer Type GT 200 , 415V , 50 HZ for 5-18 Sec, L & T make as per direction of the Engineer-in-Charge. |
| 10 | Providing and fitting, fixing Electronic Timer Type ET100, 415V, 50Hz, for 9-30 Sec, L & T make as per direction of the Engineer-in-Charge. |
| 11 | Providing and fitting , fixing spare kit without coil ( L & T) make as per direction of the Engineer-in-Charge. (i).ML1.5 |
| 12 | ii).ML2 |
| 13 | Supplying and fitting, fixing of 3.5 mm thick rubber insertion for different dia. |
| 14 | Providing & fitting , fixing of fully Automatic star Delta Motor Starter sheet enclosure for submersible motor output at 415 volt , 3 ph, 50 HZ relay range 20-32A ( ML2 , FASD cat No.SS90705) ( L & T make). |
| 15 | Providing & fitting fixing of fully automatic star Delta Motor starter in sheet enclosure for submersible motor output at 415 V , 3Ph , 50 HZ relay range 13-21A ( ML 1.5 FASD Cat No. SS90705 L & T make). |
| 16 | Providing and fitting fixing Single phasing preventor selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T/BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
| 17 | Supplying & fitting , fixing of 2/3HP submersible panel starter, relay range(17.40-24.00 Amps of BCH make. |
| 18 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range 415/500 Volt, L & T / Havell's/BCH make etc. complete as per specification and direction of the Engineer-in-charge. |
| 19 | i).32 Amps |
| 20 | ii).63 Amps |
| 21 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. (i).10sqmm |
| 22 | ii).16sqmm |
| 23 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 24 | Providing and fitting fixing of moving iron type, Range 0-100/0- 200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 25 | Providing & fitting, fixing of Volt-Ammeter 500V, 60A,Cat No.CS94817EOTO (L&T make) as per specification and direction of the Engineer-in-charge. |
| 26 | Providing & fitting ,fixing of 40A, double pole Isolator, Cat No.BE204000 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 27 | Providing & fitting of 6A, 2 pin plug top, Cat No.OP02W06 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 28 | Providing & fitting, fixing of 6A, 3 pin plug top, Cat No.OP01W06 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 29 | Providing & fitting fixing of 16 Module grid frame+ cover, Cat No.OF16WOO (L&T make) as per specification and direction of the Engineer-in-charge. |
| 30 | Providing & fitting fixing of 16 Module surface box Cat No.OW16WOO (L&T make) as per specification and direction of the Engineer-in-charge. |
| 31 | Providing & fitting, fixing of 6A, 2 pin euro socket, Cat No.OC11W06 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 32 | Providing & fitting, fixing of 6A, 1-way switch with LED, Cat No.OS13W06 (L&T make) as per specification and direction of the Engineer-in-charge |
| 33 | Providing & fitting, fixing of 63 Amps 415 V kit kat rewireable fuse Cat No. IHKKRN4032 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 34 | Providing & fitting, fixing of 100 Amps 415 V kitkat rewireable fuse Cat No. IHKKRN4100 (L&T make) as per specification and direction of the Engineer-in-charge. |
| 35 | Providing & fitting, fixing of MK1 starter contactor 220V Cat No. SS95200K000 L&T make as per specification and direction of the Engineer-in-charge. |
| 36 | Providing & fitting, fixing of MK1 starter relay,9-14A Cat No. SS9003500AO L&T make as per specification and direction of the Engineer-in-charge. |
| 37 | Providing & fitting, fixing of MK1 starter standard operating coil 220V Cat No. SS90044000 L&T make as per specification and direction of the Engineer-in-charge |
| 38 | Providing & fitting, fixing of MK1 starter thermal timer without combination coil Cat No. SS90224000 L&T make as per specification and direction of the Engineer-in-charge. |
| 39 | Providing & fitting, fixing of MK1 starter Aux. contact block :1 NO+1NC Cat No. SS90120000 L&T make as per specification and direction of the Engineer-in-charge. |
| 40 | Providing & fitting, fixing of MK1 starter push bottom unit Cat No. SS90004000 L&T make as per specification and direction of the Engineer-in-charge |
| 41 | Providing & fitting, fixing of MK1 starter Arc shield Cat No. SS50004000 L&T make as per specification and direction of the Engineer-in-charge |
| 42 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to IS code for submersible motor with all necessary equipments & fitting s as required as per specification and direction of the Engineer-in-charge. i.4.0 sqmm |
| 43 | ii.10.0 sqmm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender