Tender For Construction Of Temporary Runikhata Forest Barrack C At Gwbwrki Under Chirang Division, Kajalgaon Under Mmdrrf For The Financial Year 2026-27
Tender Value
21.10 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
2 days left
EMD
42200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chirang → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Temporary Runikhata Forest Barrack C At Gwbwrki Under Chirang Division, Kajalgaon Under Mmdrrf For The Financial Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechancial means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including setting out the excavated soil and disposal of surplus excavated soil as directged. Within a lead of 50m. 2.8.1. All kinds of soil |
| 2 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete: 16.12.1. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregae 40 mm nominal size derived from natural sources) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo-mechanically treated bars of grade Fe-500D or more. |
| 5 | Steel reinforcement for R.C.C. work including straigthening, cutting, bending, placing in position and binding all complete above plinth level. |
| 6 | Cenetering and shutteing including sturtting, propping etc. and removal 5.9.1. Foundations, footings, base of columns etc. for mass concrete. |
| 7 | Columns, pillars, piers, abutments, posts and struts. |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class desgination 7.5 in foundation and plinth in 6.1.1. Cement mortar 1:4 (1cement: 4 coarse sand). |
| 10 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level 5.1.3. 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregae 20mm nonimal size derived from natural sources. |
| 12 | Reinforced cement concrete work in walls (any thickness) including attached 5.2.2. 1:1.5:3 (1cement: 1.5 corase sand (zone-III) derived from natural sources. |
| 13 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. 6.13.2 Cement mortar 1:4 (1 cement: 4 coarse sand). |
| 14 | Steel work in built upto tabular (round, square or rectangular hollow tubes etc.) trusses etc. inlcuding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tube |
| 15 | Providing and fixing precoated galvansied iron profile sheets (size, shape and pitch of corrugations as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scrates during transportation and should be supplied in single length upto 12 metre of as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafter and trusses and including cutting to size and shape whenever required. |
| 16 | Providing ridges or hips of width 60cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washer complete. 12.4.2 0.63mm thick with zinc coating not less than 275 gm/ m2 |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dish fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.3 Kiln seasoned and chemically treated hollock wood. |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.21.1. 35mm thick including ISI marked stainless steel butt hinges with necessary screws. |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, window and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge (Note:- Butt hinges and necessary screws shall be paid separately). 9.5.1. Second class teak wood. |
| 20 | 13.4.1: 12mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). |
| 21 | 13.7 12mm cement plaster finished with a floating coat of neat cement of mix 13.7.1. 1:3 (1cement: 3 fine sand). |
| 22 | Flashing/ Aprons. (upto 600mm) North light curves Barge board (Upto 300 mm) cripm cuve gutter (600mm over all girth) Providing and fixing tiled false ceiling of specified material of sizes 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqp, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and size 24 x 38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross \\"T\\" of size 24 x 25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" of length 600mm centre to centre to form a grid of 1200 x 600mm and secondary cross \\"T\\" of length 600mm and size 24x25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 12.52 GI Metal ceiling lay in plain Tegular edge white color tiles of size 595 x 595mm, and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/ sqm (both side inclusive) and electro statically polyster powder coated of thickness 60 microns (minimum) including factory painted after bending. |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2. Fixed to openings/ wooden frames with rawl plugs screws etc. |
| 24 | Finishing walls with Acrylic smooth exterior paint of required shade: 13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer appliled @ 2.20 kg/10 sqm). |
| 25 | 62mm thick cement concrete flooring with concrete hardener topping under layer 50mm thick cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 26 | Providing and fixing aluminium sliding bood bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed or required colour or shade, with nuts and screws etc. complete 9.96.1 300x 16mm |
| 27 | Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 9.97.1 300 x 10mm |
| 28 | Providing and fixing handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 9.100.1 125mm |
| 29 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 30 | With ready mixed aluminum primer of approved brand and manufacture on resinous wood and plywood. |
| 31 | Supplying fitting and fixing switch board @ 4 Nos. fan @ 4 Nos. Tube light @ 4 Nos. plugs @ 8 Nos. and necessary wiring etc. as directed by the depatment. |
| 32 | Over Head Tank : Earth work in excavation by mechanical means (Hydralic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal or surplus excavated soil as directed, within a lead of 50m. |
| 33 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks. 1:6 (1 cement: 6 coarse sand). |
| 34 | Providing and laying in position cement concrete of specific grade excluding the cost of centering and shuttering- All work upto plinth level. 1:3:6 (1cement: 3 coarse sand(zone-III): 6 graded stone aggregate 20mm nominal size) |
| 35 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, bending, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Angle 50 x 50 x 5mm @ 3.77 kg/m) |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm nominal dia pipes |
| 37 | 32mm nominal dia pipes |
| 38 | 25mm nominal dia pipes |
| 39 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). |
| 40 | Providing and placing in position hand pump of approved quality for 40mm diameter G.I. pipe complete with all accessories. |
| 41 | Boring with 100mm diameter casing pipe for hand pump/ tubewell, in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pump/ tube well is lowered and tested. Beyond 12m and upto 18m depth. |
| 42 | Providing and placing in position filters of 40mm diameter G.I. pipe with brass strainer of approved quality. |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base of support for tank. |
| 44 | Providing and fixing Crompton CHAMP PLUS I Residential Water Pump Self Priming Regenerative 0.50 HP Single phase Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender