Tender For Construction Of Community Sanitary Complex At Gali Nho Gian Singh And Others W No 05 Panchayat:-Sana Block:-Batote Under Sbm-G(Phase-Ii)Nit No:- 34.1 Of Rew Ramban 2026-27
Tender Value
2.91 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
4 days left
EMD
5820
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex At Gali Nho Gian Singh And Others W No 05 Panchayat:-Sana Block:-Batote Under Sbm-G(Phase-Ii)Nit No:- 34.1 Of Rew Ramban 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils. |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 30% boulders |
| 4 | Dry Random Rubble Masonary with hard stone in foundation and plinth Using Nallah stone with out bond stone |
| 5 | Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) in foundation and plinth |
| 6 | Extra for brickwork above plinth level upto floor v |
| 7 | Providing and laying in position Reinforced cement concrete in beams, cantilevers, suspended floors, roofs etc. etc. all work above plinth upto floor V level of specified grade including curing but excluding the cost of centring and shuttering in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces |
| 9 | Steel Reinforcement for RCC work including cutting, bending, binding and placing in position all complete (TMT bars of Fe500 Grade) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings bases, roofs, walls, floors etc. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for:suspended floors, roofs etc. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of Slabs etc |
| 13 | 12mm thick cement plaster in 1:4 mix |
| 14 | 6mm thick cement plaster in 1:3 mix |
| 15 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. )finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.40 thick with 20 mm nominal size stone agg. Crushed |
| 16 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 18 | Providing and laying floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Floor) |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste filling complete 32mm dia |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15mm nominal outer dia pipes. |
| 24 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length. |
| 25 | Providing and fixing poly vinyl chloride (PVC) pipes for drainage of waste water etc. including fittings all complete.for 100 mm dia pipe |
| 26 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 27 | Providing and fixing wash basin with CI brackest 15mm CP brass pillar taps 32mm,CP brass waste of standard pattern inlc painting of fittings etc |
| 28 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 29 | |Providing and fixing PTMT soap dish holder having length of 138mm, 30 breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms |
| 30 | Providing and fixing 1000 litre water tank complete as per direction of engineer in charge complete |
| 31 | Carriage of Cement from source to site by mechanical transport or animal transport or by head load |
| 32 | Carriage of Sand from source to site by mechanical transport or animal transport or by head load |
| 33 | Carriage of Aggregates from source to site by mechanical transport or animal transport or by head load |
| 34 | Carriage of Bricks from source to site by mechanical transport or animal transport or by head load |
| 35 | Carriage of Stones from source to site by mechanical transport or animal transport or by head load |
| 36 | Providing/Fixing of Citizen information board (complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender