Tender For Repair And Renovation Of Office Of Superintendent Engineer Pwd(R&B)Circle Poonch(Under Non-Plan) Aaa:-Superintending Engineer Pwd(R&B) Circle Poonch Order No 83 Of 2026-27,Dated 24-07-2026
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
3 days left
EMD
9800
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Office Of Superintendent Engineer Pwd(R&B)Circle Poonch(Under Non-Plan) Aaa:-Superintending Engineer Pwd(R&B) Circle Poonch Order No 83 Of 2026-27,Dated 24-07-2026
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 6 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 7 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand).1St Sort |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar plain white marble/Udaipur green marble/zebra black marble. (Area of slab over 0.5 sqm) |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 12 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood |
| 13 | Providing and fixing 12mm thick specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing orstudding to be paid separately) :Flat pressed 3 layer particle board or graded wood particle board IS:3087 |
| 14 | Providing and fixing 30mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.Second class deodar wood |
| 15 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood |
| 16 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood.50 x 12 mm |
| 17 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x75x4 mm |
| 18 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 19 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm |
| 20 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.100x10 mm |
| 21 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 22 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 23 | Providing and fixing aluminum hanging floor door stopper, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper |
| 24 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 25 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 27 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 28 | With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 29 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 30 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 31 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 34 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 35 | Foundations, footings, bases of columns etc. for mass concrete. |
| 36 | Suspended floors, roofs, landings, balconies and access platforms. |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 38 | Sand /Stone agg. below 40 mm nominal size avg. lead 05 km by MT |
| 39 | Mulba avg. lead 02 km by MT |
| 40 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 43 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 44 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Exposed on wall.Medium |
| 45 | 15 mm dia. nominal bore |
| 46 | 20 mm dia. nominal bore |
| 47 | 25 mm dia. nominal bore |
| 48 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm |
| 49 | Providing and fixing 35 Ltr Water Gryser |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 51 | Providing and fixing following PVC fitting of appeoved quality as vectus or price |
| 52 | PVC Pipe 100mm dia |
| 53 | PVC Pipe 65mm dia |
| 54 | Floor Trap 65mm x100mm dia |
| 55 | PVC Plane band 100mm |
| 56 | PVC P band 65mm |
| 57 | PVC D band 65mm |
| 58 | PVC P.Tee 100mm |
| 59 | PVC D.Tee 100mm |
| 60 | PVC P.Trap 100mm |
| 61 | PVC P.Tee 65mm |
| 62 | PVC D.band 100mm |
| 63 | PVC Clamp 100mm |
| 64 | Providing and fixing following C.P fitting of approved quality |
| 65 | Supply and fixing of CP bib Cock (long nose) |
| 66 | Supply and fixing of CP Short body |
| 67 | Supply and fixing of CP Soap Dish |
| 68 | Supply and fixing of CP waste cuppling 4\\" |
| 69 | Supply and fixing of Grating lock plane |
| 70 | Supply and fixing of Grating lock hole |
| 71 | Supply and fixing angle valve |
| 72 | Supply and fixing CP nipple 1/2\\" |
| 73 | Supply and fixing CP nipple 1\\" |
| 74 | Supply and fixing PVC connection |
| 75 | Supply and fixing waste pipe |
| 76 | Supply and fixing BAL Bal 40mm |
| 77 | Supply and fixing union 15mm |
| 78 | Supply and fixing full thread nipple (Tank Nipple) union 15mm |
| 79 | Supply and fixing brass Bal Bal 25mm |
| 80 | Wiring for light point\fan point\call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor singel core casbel in furface \recessed medum class pvc conduit with modular switch , modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper comnductor singel cabel etc as req. |
| 81 | Wiring for light\power plug with 2x4 sq. mm FRLS PVC insulated copper conductor singel core cabel in surface\recessed medum class PVC conduit aslong with 1 no. 4 sq. mm. PVC FRLS insulated copper conductor singel core cabel in for loop earthing as req. |
| 82 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings) |
| 83 | Supply and fixing suitable G.I.box with modular plate and cover in front of surface or in recess, includijng providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch,connection ,painting,etc as req |
| 84 | Wiring for cicuit/ submain wirring alongwith earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req |
| 85 | 2x1.5 sq. mm |
| 86 | 2x2.5 sq.mm+1x2.5sq.mm earth wire |
| 87 | 2x6.0sq.mm +1x 6.0 sq. mm rarth wire |
| 88 | Supply and fixing of follo following size medum class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed comduit as req.25 mm |
| 89 | Supply and fixing following modular switch/socket on the exisitying modular plate & switch box including connections but excluding modular plste etc. as req |
| 90 | 5/6 amp switch |
| 91 | 15/16 A switch |
| 92 | 3 pin 5/6 A socket outlet |
| 93 | 6 pin 15/16 A socket outlet |
| 94 | Supply and fixing two module steped type electronic fan regulator on exisiting modular plate switch box including connection bu excluding modular plate etc as req. |
| 95 | Supply and fixing modular blanking plate on existing modular plate &switch box excluding switch box etc. as,req. |
| 96 | Supply and fixing following size/mudler,GI Box |
| 97 | 3 module (100mmx75mm) |
| 98 | 4 module (125mmx75mm) |
| 99 | Supply and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V. on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, intreconnection, powder painted including earting etc. as req. ( but without MCB/RCCB/isolator) |
| 100 | 8 way(4 +24) Double Door |
| 101 | Supply and fixing 5 A to 32 A rating, 240/415 V, 10 KA, ''C'' curve ,miniature circuit breaker suitable for inductive load of following pole in exisiting MCB DB complete with connection, teasting and commessoning etc. as req. |
| 102 | Single pole |
| 103 | Single pole and neutral |
| 104 | Supply and fixing rating, four pole 415 V isoltor existing MCB DB complete with connection,testing and commissoning et as req.100A |
| 105 | Supply and fixing of following electrical items as req |
| 106 | A/B holder |
| 107 | LED lamp 9 watt |
| 108 | Change over Switch 63 A 2 pole |
| 109 | Supply and installation 20/22 Watt LED Street 4 Feet Tube light fitting/fixture with 2000 lumens min lumens efficiency 100 lumens having 50000 burning hours |
| 110 | Supply and laying aluminium wire 25.0 sqmm from Main Pole to DB |
| 111 | Supply and fixing 12-15 watt pannel light |
| 112 | Supply,installation of Automatic stablizer for AC (90-240 Voit) copper wound single phase |
| 113 | Supply,installation,testing of 1.5 T Hot and Cold inverter type AC with all accessories Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender