Educational and Research Institute Local Bodies Closing in 6 days TDR #56787304

Tender For Purchase Of Equipment , 1. Electrochemical Workstation , General Requirements -  Research-Grade Modular Electrochemical Workstation Suitable For Corrosion, Energy Storage, Sensors, And Material Research Applications., System Shall Support Pot

Issued by Local Bodies · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
6 days left
EMD
21500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Purchase Of Equipment , 1. Electrochemical Workstation , General Requirements -  Research-Grade Modular Electrochemical Workstation Suitable For Corrosion, Energy Storage, Sensors, And Material Research Applications., System Shall Support Potentiostatic, Galvanostatic, And Electrochemical Impedance Spectroscopy (Eis) Techniques In A Single Integrated Platform, Modular And Upgradeable Architecture With Capability For At Least Two Independently Operating Channels.  Suitable For Low-Noise, High-Precision Electrochemical Measurements Over Long-Duration Experiments.,Ii) Potentiostat / Galvanostat Performance -  Applied Potential Range : ± 10 V Or Better , Compliance Voltage : ± 12 V Or Better,, Current Range : From Pa/Na Level Upto At Least ±1 A Or Higher , Current Resolution : ≤ 1 Pa (Best Range),, Voltage Resolution : ≤ 1 Μv,  High Stability, Low Drift, Low-Noise Electronics Suitable For Research-Grade Measurements\, Automatic And Manual Ir Compensation Facility, Iii) Electrochemical Impedance Spectroscopy (Eis) -  Frequency Range : 10 Μhz To 5 Mhz Or Wider , High Precision Ac Excitation Control In Millivolt Range,  Support For Equivalent Circuit Fitting And Impedance Modeling , High Signal-To-Noise Ratio With Reliable Phase Accuracy, Iv) Measurement Techniques - The System Shall Support The Following Electrochemical Techniques:  Cv, Lsv, Ca, Cp, Ocv, Sv , Dpv, Swv, Npv, Rnpv, Dnpv, Dpa, Ocp Measurement, Battery Testing (Gcd Or Gcpl), Eis And Related Impedance Analysis Techniques, V) Software - Fully Integrated Electrochemical Control And Analysis Software , Real-Time Data Acquisition And Graphical Display  Multi-Channel Experiment Control With Automation Capability, Advanced Eis Analysis With All Curve Fitting Tools,  Data Export In Standard Formats (Csv, Txt, Excel-Compatible), Perpetual Or Lifetime Software License Preferred,  Scripting Or Programmable Experiment Capability Desirable, General Electrochemistry Peak Analysis, N Fit Etc, Vi) Computer System - Desktop Computer Compatible With Instrument Software, Processor : Intel Core I5 Or Higher (Latest Generation Or Equivalent),  Ram : ≥ 8 Gb, Storage : ≥ 1 Tb Ssd, Monitor : ≥ 21-Inch Led Display, Operating System: Licensed Windows 10/11 Professional - Keyboard And Optical Mouse, Vii) Power Backup -  Online Ups, Capacity Sufficient To Support Complete System (Instrument + Computer), Minimum Backup Time: 30 Minutes At Full Load, Surge Protection And Automatic Voltage Regulation Included, Viii) Safety And Instrument Protection -  Built-In Over-Voltage, Over-Current, And Short-Circuit Protection,  Electrochemical Cell Protection Against Abnormal Load Conditions,  Proper Grounding And Shielding For Low-Current Measurements,  Fully Enclosed System With No Exposed Live Electrical Parts, Compliance With Relevant Electrical Safety Standards (Iec/Ce Or Equivalent), Ix) Accessories And Installation -  All Required Cables, Connectors, And Interface Modules Shall Be Included,  Two Standard Electrochemical Cell Kit (Including Reference Electrodes, Counter Electrodes, Glass Electrodes, Clips-Extra And Dummy Cell) Compatible With Three-Electrode Configuration Shall Be Provided,  Installation, Commissioning, And On-Site Training To Be Provided By Supplier,  Calibration Certificates And User Manuals Shall Be Supplied , Two-Year Comprehensive Warranty X) As Applicable,  Expandable Multi-Channel Configuration Beyond Two Channels,  Integrated Temperature Control Capability For Electrochemical Cell  Remote Operation And Network-Based Control Capability,  Advanced Corrosion Analysis Modules, Xi) Environmental Conditions,  A Suitable Air-Conditioning System With Stabilizer Shall Be Provided To Maintain Stable Laboratory Conditions For Instrument Operation, The System Shall Support Continuous 24×7 Operation. Warranty: Two Years, Delivery: 4-6 Weeks

BOQ

Name of Work:- Purchase of Equipment
Sl. No. Item Description
11. ELECTROCHEMICAL WORKSTATION
2General Requirements -  Research-grade modular electrochemical workstation suitable for corrosion, energy storage, sensors, and material research applications., System shall support potentiostatic, galvanostatic, and electrochemical impedance spectroscopy (EIS) techniques in a single integrated platform, Modular and upgradeable architecture with capability for at least two independently operating channels.  Suitable for low-noise, high-precision electrochemical measurements over long-duration experiments.,ii) Potentiostat / Galvanostat Performance -  Applied potential range : ± 10 V or better , Compliance voltage : ± 12 V or better,, Current range : from pA/nA level upto at least ±1 A or higher , Current resolution : ≤ 1 pA (best range),, Voltage resolution : ≤ 1 µV,  High stability, low drift, low-noise electronics suitable for research-grade measurements\, Automatic and manual iR compensation facility, iii) Electrochemical Impedance Spectroscopy (EIS) -  Frequency range : 10 µHz to 5 MHz or wider , High precision AC excitation control in millivolt range,  Support for equivalent circuit fitting and impedance modeling , High signal-to-noise ratio with reliable phase accuracy, iv) Measurement Techniques - The system shall support the following electrochemical techniques: CV, LSV, CA, CP, OCV, SV , DPV, SWV, NPV, RNPV, DNPV, DPA, OCP measurement, Battery Testing (GCD or GCPL), EIS and related impedance analysis techniques, v) Software - Fully integrated electrochemical control and analysis software , Real-time data acquisition and graphical display  Multi-channel experiment control with automation capability, Advanced EIS analysis with all curve fitting tools,  Data export in standard formats (CSV, TXT, Excel-compatible), Perpetual or lifetime software license preferred,  Scripting or programmable experiment capability desirable, General electrochemistry peak analysis, N fit etc, vi) Computer System - Desktop computer compatible with instrument software, Processor : Intel Core i5 or higher (latest generation or equivalent),  RAM : ≥ 8 GB, Storage : ≥ 1 TB SSD, Monitor : ≥ 21-inch LED display, Operating System: Licensed Windows 10/11 Professional - Keyboard and optical mouse, vii) Power Backup -  Online UPS, Capacity sufficient to support complete system (instrument + computer), Minimum backup time: 30 minutes at full load, Surge protection and automatic voltage regulation included, viii) Safety and Instrument Protection -  Built-in over-voltage, over-current, and short-circuit protection,  Electrochemical cell protection against abnormal load conditions,  Proper grounding and shielding for low-current measurements,  Fully enclosed system with no exposed live electrical parts, Compliance with relevant electrical safety standards (IEC/CE or equivalent), ix) Accessories and Installation -  All required cables, connectors, and interface modules shall be included,  Two Standard electrochemical cell kit (including Reference electrodes, Counter electrodes, Glass electrodes, Clips-extra and Dummy cell) compatible with three-electrode configuration shall be provided,  Installation, commissioning, and on-site training to be provided by supplier,  Calibration certificates and user manuals shall be supplied , Two-year comprehensive warranty x) As applicable,  Expandable multi-channel configuration beyond two channels,  Integrated temperature control capability for electrochemical cell  Remote operation and network-based control capability,  Advanced corrosion analysis modules, xi) Environmental Conditions,  A suitable air-conditioning system with stabilizer shall be provided to maintain stable laboratory conditions for instrument operation, The system shall support continuous 24×7 operation. Warranty: Two years, Delivery: 4-6 weeks Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56787304
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 17-08-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender For Purchase Of Equipment , 1. Electrochemical Workstation , General Requirements -  Research-Grade Modular Electrochemical Workstation Suitable For Corrosion, Energy Storage, Sensors, And Material Research Applications., System Shall Support Potentiostatic, Galvanostatic, And Electrochemical Impedance Spectroscopy (Eis) Techniques In A Single Integrated Platform, Modular And Upgradeable Architecture With Capability For At Least Two Independently Operating Channels.  Suitable For Low-Noise, High-Precision Electrochemical Measurements Over Long-Duration Experiments.,Ii) Potentiostat / Galvanostat Performance -  Applied Potential Range : ± 10 V Or Better , Compliance Voltage : ± 12 V Or Better,, Current Range : From Pa/Na Level Upto At Least ±1 A Or Higher , Current Resolution : ≤ 1 Pa (Best Range),, Voltage Resolution : ≤ 1 Μv,  High Stability, Low Drift, Low-Noise Electronics Suitable For Research-Grade Measurements\, Automatic And Manual Ir Compensation Facility, Iii) Electrochemical Impedance Spectroscopy (Eis) -  Frequency Range : 10 Μhz To 5 Mhz Or Wider , High Precision Ac Excitation Control In Millivolt Range,  Support For Equivalent Circuit Fitting And Impedance Modeling , High Signal-To-Noise Ratio With Reliable Phase Accuracy, Iv) Measurement Techniques - The System Shall Support The Following Electrochemical Techniques:  Cv, Lsv, Ca, Cp, Ocv, Sv , Dpv, Swv, Npv, Rnpv, Dnpv, Dpa, Ocp Measurement, Battery Testing (Gcd Or Gcpl), Eis And Related Impedance Analysis Techniques, V) Software - Fully Integrated Electrochemical Control And Analysis Software , Real-Time Data Acquisition And Graphical Display  Multi-Channel Experiment Control With Automation Capability, Advanced Eis Analysis With All Curve Fitting Tools,  Data Export In Standard Formats (Csv, Txt, Excel-Compatible), Perpetual Or Lifetime Software License Preferred,  Scripting Or Programmable Experiment Capability Desirable, General Electrochemistry Peak Analysis, N Fit Etc, Vi) Computer System - Desktop Computer Compatible With Instrument Software, Processor : Intel Core I5 Or Higher (Latest Generation Or Equivalent),  Ram : ≥ 8 Gb, Storage : ≥ 1 Tb Ssd, Monitor : ≥ 21-Inch Led Display, Operating System: Licensed Windows 10/11 Professional - Keyboard And Optical Mouse, Vii) Power Backup -  Online Ups, Capacity Sufficient To Support Complete System (Instrument + Computer), Minimum Backup Time: 30 Minutes At Full Load, Surge Protection And Automatic Voltage Regulation Included, Viii) Safety And Instrument Protection -  Built-In Over-Voltage, Over-Current, And Short-Circuit Protection,  Electrochemical Cell Protection Against Abnormal Load Conditions,  Proper Grounding And Shielding For Low-Current Measurements,  Fully Enclosed System With No Exposed Live Electrical Parts, Compliance With Relevant Electrical Safety Standards (Iec/Ce Or Equivalent), Ix) Accessories And Installation -  All Required Cables, Connectors, And Interface Modules Shall Be Included,  Two Standard Electrochemical Cell Kit (Including Reference Electrodes, Counter Electrodes, Glass Electrodes, Clips-Extra And Dummy Cell) Compatible With Three-Electrode Configuration Shall Be Provided,  Installation, Commissioning, And On-Site Training To Be Provided By Supplier,  Calibration Certificates And User Manuals Shall Be Supplied , Two-Year Comprehensive Warranty X) As Applicable,  Expandable Multi-Channel Configuration Beyond Two Channels,  Integrated Temperature Control Capability For Electrochemical Cell  Remote Operation And Network-Based Control Capability,  Advanced Corrosion Analysis Modules, Xi) Environmental Conditions,  A Suitable Air-Conditioning System With Stabilizer Shall Be Provided To Maintain Stable Laboratory Conditions For Instrument Operation, The System Shall Support Continuous 24×7 Operation. Warranty: Two Years, Delivery: 4-6 Weeks
Basic Detail
Tender No C7/CRTD/Physics/DST/2194
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 31 Jul 2026
Submission Date 17 Aug 2026
Open Date 18 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 21500
Exemption Available
Document List
844d79dc-2129-4213-b6ab-f3a2f689b00c.html
BOQ_829280.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Aug 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

844d79dc-2129-4213-b6ab-f3a2f689b00c.html

xls

BOQ_829280.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders