Tender For Day To Day Maint/Repair, Online Complaint Management System For Lower Garrison Under Age B/R-I At Mil Stn Yol
Tender Value
15 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
4 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maint/Repair, Online Complaint Management System For Lower Garrison Under Age B/R-I At Mil Stn Yol
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down old 15 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing, removal to store,complete all as specifed . |
| 2 | Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specifed . |
| 3 | Taking up or down old 25 to 32 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specifed . |
| 4 | S&F for steel tubes, 15 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified |
| 5 | All as per item No.04, above but except GI tubing, complete all as specified. |
| 6 | S&F for steel tubes, 20 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified |
| 7 | All as per item No.06, above but except GI tubing, complete all as specified. |
| 8 | S&F for steel tubes, 32 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed |
| 9 | S&F GI Elbow 15 mm,complete all as specified and directed |
| 10 | S&F GI Scoket 15 mm,complete all as specified and directed |
| 11 | S&F GI Tee 15 mm,complete all as specified and directed |
| 12 | S&F GI Nipple 15x100 mm,complete all as specified and directed |
| 13 | S&F GI Elbow 20 mm,complete all as specified and directed |
| 14 | S&F GI Scoket 20 mm,complete all as specified and directed |
| 15 | S&F GI Tee 20 mm,complete all as specified and directed |
| 16 | S&F GI Nipple 20x100 mm,complete all as specified and directed |
| 17 | S&F 15 mm Tank Nipple suitable for HDPE water tank (Minimum weight 15 mm-38 gms/20 mm-45 gms/25 mm-65 gms) complete all as specified and as directed |
| 18 | S&F 20 mm Tank Nipple suitable for HDPE water tank (Minimum weight 15 mm-38 gms/20 mm-45 gms/25 mm-65 gms) complete all as specified and as directed |
| 19 | S&F 32 mm Tank Nipple suitable for HDPE water tank (Minimum weight 15 mm-38 gms/20 mm-45 gms/25 mm-65 gms) complete all as specified and as directed |
| 20 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 21 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 22 | S&F 20mm Tank adaptor for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 23 | S&F 20mm Union for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 24 | S&F 16mm Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 25 | S&F 16mm Brass Elbow for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 26 | S&F Brass Elbow reducer (3/4 X ½) for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 27 | S&F 16mm Brass Tee for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 28 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshade, shelves, lintles etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cms girth all as specified and directed. |
| 29 | Taking down water tank exc 500 litrs & n exc 1000 ltrs capacity & removing to store, complete all as specified. |
| 30 | S&F for Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified. |
| 31 | S&F for Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified. |
| 32 | S & F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank. |
| 33 | S&F flush strip 50mm wide and 10 mtr Long,complete all asspecified and directed by Engineer in charge |
| 34 | S&F for Fancy type Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. |
| 35 | S & F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 36 | S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 37 | S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). |
| 38 | S & F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms |
| 39 | S & F in repairs 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) |
| 40 | S&F in repair 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 41 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 42 | S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 43 | S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement Complete all as specified. |
| 44 | S&F for Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified. |
| 45 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm Complete all as specified. |
| 46 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm Complete all as specified. |
| 47 | S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed |
| 48 | S & F in Repairs brass spindle/disc suitable for Cp piller tap,cp bib tap,angle cock all as specified and directed |
| 49 | S & F in repairs Peg set 6 hook steel all as specified and direted. |
| 50 | S/F in repair 32mm bore PVC waste down take pipe fixed in WHB/sink complete all as specifide and direted . |
| 51 | Dismantling PVC drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings all as specified and directed. |
| 52 | S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed. |
| 53 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified. |
| 54 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of bore 75 mm, laid in repairs complete, all as specified. |
| 55 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete, all as specified. |
| 56 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified. |
| 57 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore provided with oval access door, fixed in repairs all as specified. |
| 58 | S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified. |
| 59 | S&F for PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore, fixed in repairs complete all as specified. |
| 60 | S&F for PVC (SWR) bend any radius with or without access door, 75mm bore, fixed in repairs complete all as specified. |
| 61 | S&F for 110 mm PVC (SWR) vent cowl complete, all as specified. |
| 62 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 63 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd |
| 64 | S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed |
| 65 | S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified. |
| 66 | S&F Brass CP mixer 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F for angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. |
| 68 | S&F in repair two way bib cock/angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 69 | S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe including CP Jet etc and making good to floors to match existing, in repairs, all as specified. |
| 70 | S&F in repairs Vitreous china water closet pan ( pedestal pattern),/Anglo indian white including fixing bolts etc including fixing of plastic seat cover of WC, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, flushing cistern and flush pipe etc. |
| 71 | S&F in repair only 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified. |
| 72 | S&F in repair of flushing cistern kit,complete all as specified and directed by Engr-In-Charge. |
| 73 | S&F Seat and cover for pedestal pan |
| 74 | S&F Flushing cistern pipe(L-Bend) complete all as spcified. |
| 75 | S&F in repair Vitreous china wash basin, white, corner or flat of size 450 X 300mm or any other size as directed by Engr-in-charge and excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repairs. |
| 76 | S&F in repair Polyethylene and unplasticised PVC pipe 32 mm bore low density polyethylene (LPDE) pipes of pressure rating 6 kgf/sq. cm, complete all as specified. |
| 77 | S& F in Repair Sink with drain board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, all as specified. |
| 78 | S&F for Sheet glass shelf assembly, 55 cms long consisting of 5.5 mm thick sheet glass shelf 12cms wide with chromium plated bracket guard (rectangular/ oval/ curved and railing 60 cms long, selected quality as approved by GE, fixed in repairs, all as specified and directed. |
| 79 | S&F for 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified. |
| 80 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all specified |
| 81 | S&F for Steel plate rack made of stainless steel having thickness 1.00mm, fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 600mm x 750mm, all as specified and directed. |
| 82 | S&F for Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size all as specified. |
| 83 | Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering. |
| 84 | S&F for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type hooks with grade of zinc coating 275 of 0.63 mm thickness. |
| 85 | All as per ser item No 83, above but except sheeting any thickness, complete all as specified. |
| 86 | S&F for Plain, galvanised, mild steel sheeting, in ridges, hips and straight flashings (length and girth as fixed) with grade of zinc coating 275 of 0.80 mm thickness. |
| 87 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 88 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inbroof covering/cladding to wall, fixed with self tapping screws as specified |
| 89 | Mild steel work as in framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing complete con |
| 90 | S&F mild steel plain black sheet 1.00mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rrivets and fixed to wooden steel memberes etc with plain 40mm lap joints or walds/reavated inlcluding b |
| 91 | M&L for welding in repairs n.exe 2.5 cm in length on metals to be welded n.exc. 6 mm thick each. |
| 92 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 93 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 94 | M&L for Non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified. |
| 95 | M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6.complete all as specified. |
| 96 | M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm th rendering in CM 1:3.complete all as specified. |
| 97 | M&L for Glazed ceramic coloured tiles 450 x 350 x 7 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified. |
| 98 | Demolition of stone/boulders or brick masonary built in cment mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. |
| 99 | M&L Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 brought up to course complete all as specified and directed. |
| 100 | All as per Item No. 99 but except stone |
| 101 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete. |
| 102 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 103 | M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth without using extra cement on internal wall surface, complete all as specified. |
| 104 | M&L for 15mm thick rendering on to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth without using extra cement on external wall surface with water proofing compound as per manufacture instruction, complete all as specified. |
| 105 | M&L for 10 mm thk rendering in cement mortar 1:3 on ceiling surfaces, finished surface evan and smooth without using extra cement complete all as specified & directed. |
| 106 | M&L for Preparation of new plastered or unplastered surfaces of walls with wall care putty, 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed. |
| 107 | M&L for Preparation of old or previously treated plastered surfaces of walls and applying two coats of oil bound distemper over wall care putty, 2 mm thickness over plastered surface to prepare the surface even and smooth including complete removal of existing treatment complete all as specified and directed. |
| 108 | Preparation of new plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 109 | Preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 110 | M&L for Preparation of new plastered or unplastered surfaces with wall care putty 1mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper on ceiling complete all as specified and directed. |
| 111 | M&L for Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying two coats of oil bound distemper on ceiling complete all as specified and directed. |
| 112 | M&L for Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying two coats of oil bound distemper on walls of staircase area complete all as specified and directed. |
| 113 | M&L preparation or old wooden or wood based surface of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 114 | M&L preparation or old steel and iron surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 115 | M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 116 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 117 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete. |
| 118 | Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed. |
| 119 | Refixing the shutter in same position of any descreption exc 1sqm but n exc 2sqm each complete all as specified |
| 120 | S&F for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface., etc., complete all as specified |
| 121 | S&F for pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,ncluding 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified |
| 122 | M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, hold fast etc; complete all as specied and as directed |
| 123 | S/F 35 mm thick 2nd class hard wood rail and style plain framed,factory made panelled shutter (one panel) without interlocking rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 124 | S/F 35 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 125 | S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed. |
| 126 | S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 127 | M&L WPC(Wood Polymer Composit) Double Prelam Door Frame(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. co mplete as per manufacture's specification & direction of engineer-in charge. |
| 128 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing. |
| 129 | M&L for Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified. |
| 130 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 131 | S&F for 3mm thick figured glass, pin head type and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 132 | S&F for 2mm thick Fibre glass reinforced translucent corrugated/Plain sheeting with two corrugations side lap/Plane fixed with coach screw and washer in roof, wall/window Glass etc complete all as specified and directed. |
| 133 | S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with finned tacks of galvanised wire staple fixed with stainless steel wire staples, complete all as specified. |
| 134 | M&L for Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 135 | M&L for Applying two coats of synthetic enamel paint on old wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 136 | S&F for 100 mm size butt hinges medium weught , cold rolled MS and fixed. |
| 137 | S&F for 150 mm size Handles extruded aluminium alloy handles,fabricated type anodised |
| 138 | S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed. |
| 139 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed. |
| 140 | S&F for Mild steel, 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete fixed to chowkhats, all as specified. |
| 141 | S&F 2nd class hardwood Plain, solid, straight, cupboard chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 142 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination, fixed with screws to timber frame work and wall |
| 143 | Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed. |
| 144 | 18/19 thick external teak wood lipping, 3-4mm thick fixed with nails complete all as specified and directed.. |
| 145 | S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 40mm, complete all as specified. |
| 146 | S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of stainless steel, bright finished complete all as specified and directed. |
| 147 | S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 148 | S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed. |
| 149 | S & F 25mm dia Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete as in repair complete all as specified and directed. |
| 150 | S & F for door closer Aluminium die cast body Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected. |
| 151 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified. |
| 152 | S&F false ceiling of Non asbestos(Designer) 4 mm fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised GI powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. |
| 153 | M&L for air lock in tap/Gyser or No water in qtr complete all as specified and dircted. |
| 154 | Repair to Leakage/seepage in sunken portion of WC/Bath/Kitchen from outside area duly taking down brick/stone masonary or concrete surface upto the broken trap/bend/joint/pipe of any description and rectify the leakage from joints with cement sand mortar/replacement of CI/PVC trap/bend/joint/Pipe and make good the disturbed portion complete all as required and directed by Engr-in-Charge |
| 155 | Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. |
| 156 | Taking down Main switch/DB of any type/size complete with all accessories all as directed. Please Enable Macros to View BoQ information |
| 157 | Taking down Main switch/DB of any type/size complete with all accessories all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender