Tender For Construction Of Market Complex At Brindabanghat. / Sh: Providing Internal Electrification.
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
2 days left
EMD
19938
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Market Complex At Brindabanghat. / Sh: Providing Internal Electrification.
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work : |
| 2 | Wiring for light & fan point with 2 X 1.5 sq. mm. PVC insulated copper conductor cable (FR) in PVC casing and capping complete with PVC surface modular switch board with cover plate and 10A. modular switch including connection etc. as required Short Point :- |
| 3 | Medium point:- |
| 4 | Long point:- |
| 5 | Providing and Fixing of 3 Pin 10 Amps Plug Point with Modular Type 6/10 Amps Switch and Socket including Connection with 2x1.5 sq.mm PVC insulated Copper Conductor Cable [FR] on Surface Modular Switch Board, Earthing the 3rd Pin etc. as required. |
| 6 | Providing and Fixing of 3/6 Pin 16/20 Amps Plug Point with Modular Type 16/20 Amps Switch and Socket including Connection with 2x2.5 sq.mm PVC insulated Copper Conductor Cable [FR] on Surface Modular Switch Board, Earthing the 3rd Pin etc. as required. |
| 7 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:- a) 2 X 1.5 sqmm |
| 8 | 2 X 2.5 sqmm |
| 9 | 2 x 4.0sqmm |
| 10 | 2 X 6 sq mm |
| 11 | Supplying and Fixing of the following PVC Casing Capping with all accessories etc. as required. 25mm x 12mm |
| 12 | Supplying and Fixing of the following PVC Conduit (Medium Gauge) with all accessories etc. as required 19/20mm dia |
| 13 | Supplying and Fixing of the following Electrical Accessories including necessary connection etc. as required. 6/10 Amps One Way SP Switch (1M) |
| 14 | Electronic 4-Step Fan Regulator (1M) |
| 15 | 32 Amps DP Switch |
| 16 | Angle Holder |
| 17 | Supplying and Fixing of the following sizes Wooden Switch Boards with 3mm thick Bakelite Cover etc. as required. 254mm x 300mm (10\\"x12\\") |
| 18 | 203mm x 254mm (8\\"x10\\") |
| 19 | Providing and Fixing / Drawing 4.06mm dia (8 SWG) Copper wire on Surface or in existing G.I / PVC / Polythene Pipe for Loop Earthing as required |
| 20 | Providing earthing system with maintenance free earthing electrode of 50 mm dia & 3 mtr long of dual electrode technology filled with highly conductive compound and back fill compound of 2 nos. 25 kg bag, terminal size 32mmx 6mm including accessories with masonry enclosure of CI cover plate size 12\\"x 12\\" having locking arrangement including CC works etc as required:- |
| 21 | Supplying and Fixing of 1200 mm Sweep White Colour AC Celling Fan Capacitor type Double Ball Bearing complete with 300 mm Down Rod, Canopies, Shackles, 3 Nos Blades, including wiring the Down Rod with 2 x 1.5 sq.mm PVC Insulated Copper Conductor Cable [FR] (ISI Marked, BEE 1 Star/Minimum Servicce Value 4.0 m3/min/W). |
| 22 | Supplying and Fixing of following Surface / Recess Mounted LED Luminaries in Powder Coated Die Cast Housing complete with High Efficiency Polycarbonate Diffuser and necessary connection etc. as required [with 50000 Burning Hours and minimum Lumen Output100 lm/Watt. Surface Mounted 12W Square Shaped LED Downlight with integral driver and high quality Polycarbonate Diffuser |
| 23 | Recessed round/Square shaped 6 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 24 | Supplying and Fixing of following LED Tubes, Retrofit Bulbs / Lamps for LED Luminaries including necessary connection etc. as required. 18/20 Watt LED Tube with Integral Driver and Polycarbonate Diffuser (50000 Burning Hours and Minimum Lumen Output of 100 lm/Watt) |
| 25 | 9 Watt LED Retrofit Lamp with Polycarbonate Body and Aluminium Heatsink. |
| 26 | 3 watt LED retrofit lamp with polycarbonate body and aluminium heatsink (Red, Yellow, Blue) |
| 27 | Supplying and Fixing of following Outdoor LED Luminaries in Powder Coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt 60 Watt LED Street Light Fixture with Integral Driver and Secondary Lens (IP66) |
| 28 | Supplying and Installation of Switch Dis-Connector Fuse Unit [Main Switch] of the following ratings with all accessories including necessary connection etc. as required. 32 Amps 240 Volts DP Main Switch (Rewireable) |
| 29 | 63 Amps 240 Volts DP Main Switch (Rewireable) |
| 30 | 100 Amps 415 Volts TPN Main Switch (Rewireable) |
| 31 | Supplying and Installation of Fuse Unit – Kitkat / HRC / HBC of the following ratings in existing Main Switch / Panel Board including necessary connection etc. as required. 32 Amps Kitkat Porcelain Fuse unit with Base [Re-Wireable] |
| 32 | 63 Amps 415 Volts TPN Main Switch (Rewireable) |
| 33 | 100 Amps Kitkat Porcelain Fuse unit with Base [Re-Wireable] |
| 34 | Supplying and Installation of Powder Coated Steel Sheet enclosure [MCB DB] suitable for 240/415 Volts MCB/Isolator/RCCB [SP/SPN/DP/TP/TPN/FP] complete with necessary Bus-Bar, Neutral Link, Din Rail, Earth Bar etc. as required. 4 Way SPN MCB DB [Single Door] |
| 35 | Supplying and Installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required. 6 to 32 Amps SP MCB |
| 36 | Supplying and Installation of BusBar Chamber of the following ratings and sizes made of steel sheet enclosure with all accessories incl. necessary connection 300 Amps 415 Volts Four Strips Copper Busbar Chamber 6 Ways of Sizes (610mm x 410mm x 150mm) |
| 37 | 100 Amps 415 Volts Four Strips Copper Busbar Chamber 6 Ways of Sizes (610mm x 410mm x 120mm) |
| 38 | 63 amps 415 volts four strip Copper busbar chamber 6 ways of size (455mmx330mmx120mm):- |
| 39 | Almunium Conductor Armoured Cable with necessary connection etc. as required. 3.5 Core 70 sqmm |
| 40 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required. per direction of site engineer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender