Tender For Provision Of Dr Site For Ewias At Aryabhatta Builiding, Drdl, Hyderabad
Tender Value
40.96 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
18 days left
EMD
81920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Dr Site For Ewias At Aryabhatta Builiding, Drdl, Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Aluminium partition with glass.Length- 17m, height- 3m. Area 51 sqm. Glass Area 35 sqm, ACP area 16 sqmDesigning, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF I Lumiflon based fluoropolymer resin coating of approved colour and shade on face# 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 3 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing I paneling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge.Powder coated aluminum (minimum thickness of powder coating 50 micron) |
| 4 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 5 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 6 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm |
| 7 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm |
| 8 | Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. |
| 9 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: 125x64x1 .90 mm |
| 10 | FURNITURE |
| 11 | Providing and Fixing Modular cabin 3m length with two partition made of plywood with 2mm thick laminate and drawer with lock, keyboard space and ups tray. Top part with fabric and mdf with one side writing and onother pinup board facility. The ply should be minimum 25mm thick. |
| 12 | Revolving Office Chair High Back |
| 13 | Office table with drawer and lock 1.5m in length and 850mm width made of 25mm plywood and 2mm laminate on top. |
| 14 | E&M WORK |
| 15 | POWER WIRING |
| 16 | Supply, Installation, Testing & Commissioning of TPN+E, 4 PIN, 40 Amp socket industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure |
| 17 | Supply, Installation, Testing & Commissioning of 16 Amp socket |
| 18 | Supply, Installation, Testing & Commissioning of 6 Amp socket |
| 19 | CABLE TRAYS |
| 20 | Supply, Installation, Testing & Commissioning of GI cable trays of following sizes with all accessories viz. Connector, angle, fastener ,suspender etc.. |
| 21 | 300mm x 54mm Cable Tray |
| 22 | 150mm x 54mm Cable Tray |
| 23 | MV CABLE |
| 24 | Supply of following size 1.1KV grade XLPE insulated armoured alluminium conductor MV cables including cable Gland and Lugs on cable trays as required |
| 25 | 3.5C x 185 Sq.mm |
| 26 | 3.5C x 50 Sq.mm |
| 27 | 4C x 16 Sq.mm |
| 28 | Laying of one nunber PVC insulated and PVC Sheathed /XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning ,protective covering and refilling the trench etc as required. |
| 29 | up to 35 Sq.mm |
| 30 | Above 35 Sq. mm and upto 95 Sq.mm |
| 31 | Above 95 Sq. mm and upto 185 Sq.mm |
| 32 | Power & Control Cable : Supply, laying & Commissioning of following size 1.1KV grade PVC insulated armoured copper fire retardant conductor including cable Gland and Lugs |
| 33 | 3C x 2.5 Sq.mm (copper) flexible cable |
| 34 | 4 Sq.mm (copper) flexible cable |
| 35 | Flexible Wire : Supply, laying & Commissioning of FRLS ,Copper flexible wire of of following size 1.1KV grade |
| 36 | 6 Sq.mm (copper) flexible wire |
| 37 | 1.5 Sq.mm (copper) flexible wire |
| 38 | Supply, Installation, Testing & Commissioning of 5 star 1200Sweep Ceiling Fan |
| 39 | SHOP ELECTRICALS |
| 40 | Supply, Installation, Testing & Commissioning of 240/415volt VTPN (Vertical Three Pole Neutral) Distribution Boards with MCCB and Tinned copper Busbar having 200A with RCBO 40mAIncomer : 200A, 4P, 25KA MCCB : 02 NosOutgoing : 63A, TPN, 16KA MCB: 04 Nos |
| 41 | Supply, Installation, Testing & Commissioning of 240/415V, MCBDB 4way /6way MCB 63A, 16KA |
| 42 | Supply, Installation, Testing & Commissioning of 240/415V, 32A,10KA MCB |
| 43 | Supply, Installation, Testing & Commissioning of 240/415V, 6A,9KA MCB |
| 44 | SPECIAL EARTHING |
| 45 | Supply, Installation, Testing & Commissioning of maintenance free ,low carbon mild steel copper coated earth rod of 03 mtrs electrode having diameter of 14.2mm with copper coating thickness of 250micron tested as per IEC 62651-2 & IS PROVIDED WITH UNIVERSAL CLAMP MADE OD SS to connect rod with flat conductor. Earth conductvity enhancing compound shall be of 25 kg/pit tested as per IEC 6256-7, TCLP tested . The above arrangement's shall be provided with heavy duty earth chamber of 5000kg load bearing capacity to ensure the safety of earthing systems. |
| 46 | Providing & Fixing of 25x6mm hot dip Galvanized GI strip |
| 47 | LAN & TELEPHONE |
| 48 | Supply, Installation, Testing & Commissioning of Telephone outlet point (RJ11) with anodidised GI box with front plate and telephone socket |
| 49 | Supply, Installation, Testing & Commissioning LAN outlet point (RJ45) with anodidised GI box with front plate |
| 50 | Supply, Installation, Testing & Commissioning commissioning of 25mm heavy class FRLS PVC conduit along with all accessories in surface/recess |
| 51 | Supply, laying, testing & Commissioning of LAN cable in the existing surface/recessed |
| 52 | Supply, laying, testing & Commissioning of 2 pair 0.5 sq.mm FR PVC insulated annealed copper conductor, unarmored Telephone cable in the existing surface/recessed |
| 53 | AIR CONDITIONING |
| 54 | Supply, Installation, Testing & Commissioning of executed Aluminum Powder Coated ceiling square diffuser aluminum collar dampers and grills |
| 55 | FIRE ALARM |
| 56 | Removing, reinstalling and commissioning of existing FA, detectors and all accessories and testing after integration with existing FACP |
| 57 | Supply, laying & Commissioning of FRLS 2C x 1.5 Sq.mm Fire Alarm cable |
| 58 | FIRE EXTINGUISHER |
| 59 | Supply, Installation, Testing & Commissioning of 4.5Kg CO2 cylinder |
| 60 | GAS SUPPRESSION SYSTEM |
| 61 | Supply, Installation, Testing & Commissioning of PESO approvedd IG541 Cylinder – with Constant Flow Technology, 300 Bar. (OEM Factory Filled), and with Safety Bust Disc Assembly. Complete with low pressure switch, Pressure switch, Pressure gauge. 140 Ltr cylinder with IG541 Agent |
| 62 | Supply, Installation, Testing & Commissioning of Pressure Regulator(constant Discharge Technology) for each cylinder to reduce the pressure from 300bar to 60 bar before the manifold. |
| 63 | Supply, Installation, Testing & Commissioning of Flexible Discharge Hose with check valve |
| 64 | Supply, Installation, Testing & Commissioning of Electrical Actuator |
| 65 | Supply, Installation, Testing & Commissioning of Manual Actuator with lever |
| 66 | Supply, Installation, Testing & Commissioning of Actuation Hoses |
| 67 | Supply, Installation, Testing & Commissioning of Pneumatic Actuator vlaves with actuatuion hose, Tees, Elbows and with required accessories |
| 68 | Supply, Installation, Testing & Commissioning of Actuator arming tool to reset the actuator after operation (for Electrical Actuator an Pneumatic Actuator) |
| 69 | Supply, Installation, Testing & Commissioning of Discharge Pressure Switch, Shall be install on the Discharge piping after manifold |
| 70 | Supply, Installation, Testing & Commissioning of Main/Reserve selector switch with PF contacts for both positions, wth DPDT Relay, complete with back box an mounting accessories |
| 71 | Supply, Installation, Testing & Commissioning of Nozzels, 360 Deg/180 Deg Throw, selection as per approved hydralic flow calculations |
| 72 | Supply, Installation, Testing & Commissioning of Bleed valve |
| 73 | Supply, Installation, Testing & Commissioning of Piping Sch 40/80 seamless with all required fittings, accessories, painting etc complete |
| 74 | Supply, Installation of Cylinder Manifold supports and fittings included any special tool to rest any components within the clean agent system |
| 75 | Supply, Installation, Testing & Commissioning of UL864 10th edition UL listed an FM approved Analog Addressable 2 Loop Fire Alarm Control Panel having the total panel capacity of 252 devices. The panel shall be able to give pin point location of all Fire/Fault and isolation conditions of addressable units via the address codes. The panel shall have the capacity of storing upto 10000 events. Furher, the panel must be able to automatically switch ON/OFF respectively control module whenever any alarm is triggered. The panel should have inbuilt common Alarm, Fault and monitored sounder output. The panel shall have a 2”x4 – 3/4” size VGA monochrome LCD display and having maximum 320 (8x40) characters in the display with optional 24 Zones LED indicators. The Panels shall have a built in power supply of 170 watts and batters charger. Battery charger shall be able to charge the system batteries of up to 33 AH capacity. The panel shall have the capacity of connecting maximum 16 Remote terminals/16 Remote displays or combined by using 2xRS 485 card. T he panel shall have Gas Release module for Fire Suppression system. Pnael shall have Facility to provide Open Protocol of Bacnet/Modbus for integration with BMS system. |
| 76 | Supply, Installation, Testing & Commissioning of UL268 6th and 7th edition compliance and FM approved intelligent Addressable multi-criteria detector (optical & Thermal sensors) complete with standard base, facility to mount in different comprehensive environment, Tri-color detector status LED with 360 degree view, microprocessor circuity with error check;detector self diagnostics and supervison program ,Rate-of -RiseDetection:15°F /min.(8.3°C/min)-Fixed:135°F(57°C),Field programmable as rate-of-rise or fixed temperrature,Polarity insensititive,Superior EMI and RFI immunity ,RoHS compliant .Detector shall have in -built isolator for better reliability,circuit integrity and advanced fault finding.Manufacturers not having in-built Isolator feature in detector shall consider isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost for Fire Suppression system |
| 77 | Supply, Installation, Testing & Commissioning of UL listed Release Switch with UL listed Manual Abort Station with UL listed Monitor module and all required Accessories for fire suppression system |
| 78 | Supply, Installation, Testing & Commissioning of UL listed Release Switch with UL listed Monitor module and all required Accessories for fire suppression system |
| 79 | Supply, Installation, Testing & Commissioning of UL listed Sounder cum strobe with control module and all required Accessories for fire suppression system |
| 80 | Supply, and laying of 2C x 1.5 Sq.mm FRLS Armoured Cable with all required accessories for fire suppression system |
| 81 | Supply, Installation, Testing & Commissioning of LED illuminated Exit signages with message ‘GAS EXTINGUISHING IS IN PROGERSS DO NOT ENTER’ with control module and all required Accessories Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender