Tender For Road Safety Work At Bilrayan Panwari Road (Sh-21) In Km. 443(900),444,445,446,447
Tender Value
40 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
1 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
2720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mahoba → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work At Bilrayan Panwari Road (Sh-21) In Km. 443(900),444,445,446,447
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 |
| 2 | Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 +205. The finished surface to be level, uniform and free for streaks and holes. (As per MORTH specification no 803(8.13) Repated Bar Marking. |
| 3 | Reflective Raised Pavement Markers(CatEye/RoadStud)Supply and fixing or raisedpavement marker with Made of Plastic body or RPM/ Road Stud shall bemoulded from ASA (Acrylic Styrene Acrylonltrite) or HIPS (High-lmoact Polystyrene) or AcryloniitrileButadien Styrene (ABS) or Any other su,table material approved by the Engineer. The Marker shallsupport aloadof13.635 kg testedInaccordance withASTMD4280.The Reflective panels shallcons,stof number of lenses containing single or dual prismatic cubes capable or providing total internal reflection of the light entring the lens face Lenses shall be mouled of methyl methecrylale conformingtoASTM0788 of equivalent.The sloporretro-reflectingsurface shallpreferablybe 35+/.Sdegreet obaseand the area oleac hretro -reflecting surface shall not be less than 13.00sq.cm.them arkerheight shall not be less than 10mm and shall not exceed 20mm&Widthshallnot exceed 130mm.Thebase of the marker shall be flat within 1.3 mm allroad studs shall be legibly marked with the name , trade or other mean so fidentification or the manufacture. epoxy Installations,excess adhesive around theedgeorthemarker,excess adhesiveon the pavement and adhes, veontheexposed surfaces or the markers shall be Immediately removed. The contractor shall submit a two year warranty for satisfactory field perfonnance Including stip ulated retro-reflect anceof the reflecting panel, to the Engineer. Inaddition.at woyear warranty ror satisfactory Infield performance of the finishedroadmarker shallalsobegivenbythe contractor wiho carries out the work of fixmg of reflective road markers. In case the markers aredisplaced , damaged , gel worn out or lose their reflectivity compared to stipulated standards , thecontractor would be required to replace all such markers within 15 days of the intimation from theEngineer. at his own costThe rate shallInclude all materials, labour, T&P, transportation,lnstalla onandincidentalsallcomplete asper direct,onoltheEngineer-on-Charge RPM(withshank) |
| 4 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per MORTH specification no 801(X) Hazard Board |
| 5 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per MORTH specification no 801(8.4 (VIII) SINGLE CHEVRON (NORMAL) |
| 6 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dust, oil, grease, efflorescence and applying paint @ 1 litre for 2 sqm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender