Tender For Construction Of Up Graded Higher Secondary School At Ekma Govt. High School Building Under Bargaon In The District Of Sundargarh For The Year 2023-24
Tender Value
1.40 Crore
Estimated cost
Bid Submission
12 Aug 2026
11 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Up Graded Higher Secondary School At Ekma Govt. High School Building Under Bargaon In The District Of Sundargarh For The Year 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil within initial lead and lift including rough dressing and breaking clods etc. complete. including dressing and levelling the bed not exceeding 1.50m depth and Depositing the Soil within initial lead of 50m & as per specification approved by the Department. |
| 2 | Providing filling foundation and plinth with sand well watered and rammed with all leads and lifts including cost , conveyance, royality of materials labour . T & P etc. complete as per direction of Er. In Charge. |
| 3 | Cement concrete (1:3:6) with 4cm size hard granite metal of approved quality and approved quarry in foundation including hoisting laying concrete with cost conveyance of materials including watering, curing, royality all T & P required for the work etc. complete as per direction of the Er. in charge. |
| 4 | Cement concrete of proportion (1:2:4) with 12mm (1/2\\") size hard granite crusher broken chips including watering curing, cost, conveyance, royalties and all taxes of all materials labour with T&P required for the work etc.complete as per direction of Engineer-in-charge. |
| 5 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in foundation plinth & basement and for ornamental flower beds plinth moulding and similar such type of works with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge. |
| 6 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge. |
| 7 | R.C.C work with R.C.C M-25 using 20mm downgraded size hard granite chips of approved quality from approved quarry having a minimum comprresive strength (in work test) 25 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance,royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge. |
| 8 | COLUMN BASE |
| 9 | PLINTH |
| 10 | LINTEL GF |
| 11 | CHAJJA GF |
| 12 | BEAM,COLUMN GF |
| 13 | BEAM,COLUMN FF |
| 14 | WINDOW SILL GF |
| 15 | ROOF SLAB GF |
| 16 | STAIRCASE GF |
| 17 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge. |
| 18 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside rough surface of 10\\" thick brick walls after racking out the joints including watering and curing with cost, conveyance, royalty, all tax of all materials and cost of all labour with T&P required for the work etc. complete. as per the direction of Engineer in Charge. |
| 19 | Finishing surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 20 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 21 | 20mm thick cement plaster in cm (1:4) for Grading plaster with all cost conveyancy Royality etc. complete. |
| 22 | Fixing Kota tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 23 | Fixing Kota tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 24 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 25 | Supplying fitting and fixing of unplaticised poly vinly chloride (UPVC) (FENESTA/NCL VEKA LTD ventilator top hung 60 series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames.70mmx60mmx2.25mm for casment windows sash profile capable of mounting single gazing system etc. |
| 26 | Supplying, Fitting and fixing of iron Grill, Door and window etc. completewith clamps including making good to the wall , ,ceilling and floor all complete as per specification including cost of material with all cost ,conveyance including scaffolding tax,T&P,labour etc complete as per the direction of the Engineer - in -charge.. |
| 27 | Supplying,fitting and fixing of M.S. collapsable gate made out of gate channel 20x5 mm flat h.gutkha,washer including all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) |
| 28 | Providing and fitting 30mm thick flush door shutter |
| 29 | Labour charges for fitting and fixing of M.S. doors & windows as per approved design including cost of screw etc.complete but excluding cost of M.S.windows grills as directed by the Engineer-in-charge. |
| 30 | Painting two coats over a coat of primer with cost of approved paint. |
| 31 | Distempering two coat to walls with distemper of approved shade on new work to give an even shade including cost of Distempering |
| 32 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 33 | Wall Painting 2 coats with weather coat of approved shade on new work to give an even shade including cost of paint etc. complete as per directionn of Engineer-in-charge |
| 34 | Priming one coat with any approved primer including cost of primer |
| 35 | Labour for fixing GCI Sheet in roof, including fixing of ridges in wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties. |
| 36 | Dressed seasoned non sal wood work framed and fixed ( wrought and put up ) in bargan, rafter and posts. |
| 37 | supplying fitting ,fixing of ms angle etc. as per specification. |
| 38 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 39 | -do- (Gr.B) (1.1.2-1.24.2) |
| 40 | -do- (Gr.C) (1.1.3-1.24.2) |
| 41 | Recessed wiring to Fan Point in |
| 42 | -do- (Gr.B) (1.1.2-1.24.2) |
| 43 | -do- (Gr.C) (1.1.3-1.24.2) |
| 44 | Recessed wiring to Exhaust Fan Point in |
| 45 | -do- (Gr.B) (1.1.2-1.24.2) |
| 46 | -do- (Gr.C) (1.1.3-1.24.2) |
| 47 | S/F of M.S. Box for 2 Module 18 swg |
| 48 | S/F of M.S. Box for 6 Module 18 swg |
| 49 | S/F of M.S. Box for 8 Module 18 swg |
| 50 | S/F of M.S. Box for 12 Module 18 swg |
| 51 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 52 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 53 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.3+1.25.5) |
| 54 | S/F of Power point with 8 modular metal box with modular base & cover in recess including providing and fixing of 2 nos 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required for Inverter Connection |
| 55 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 56 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 57 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 58 | -do- 4x6 sqmm + 2 x 2.5 sqmm (1.8.10) |
| 59 | Inverter wiring (1x1.5smm) Copper wire (1.19.11A) |
| 60 | Supply, Installation testing and commissioning of 63 Amp. IC TPN Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.3) |
| 61 | Supply of250 mm x 300 mm x100 mm deep(1.24.13) for fixing 63 Amp ICTPN Main Switch. |
| 62 | S/F of 100 Amp. T.P.N. Copper Bus Bar with all connections (Make:BENLO) |
| 63 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 64 | S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 65 | S/F of 63A FOUR POLE MCB C Type ( Make - L&T /Equivalent) |
| 66 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 67 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 68 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 69 | S/F of Fan hook S, Type on ceiling. |
| 70 | S/F of step type modular fan regulator |
| 71 | S/F of 13 Watt. LED bulb. |
| 72 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 73 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 74 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 75 | Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 76 | Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 77 | S/F of 2000VA Inverter with 2 no. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/V-Guard) |
| 78 | S/F of 10 Watt Bulk Head (Make-Havells) |
| 79 | S/F of 18W Recess Mount(Round/Square) or Surface Type Ceiling light (Havels/crompton/philips/panasonic) |
| 80 | Supply of 3.5core 35 sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable/equivalent) |
| 81 | Laying of MV cable above 25sqmm to 120 sqmm in ground (5.1.2) |
| 82 | Laying of MV cable above 25sqmm to 120 sqmm on surface (Horizontally)(5.5.2) |
| 83 | Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor GI/PVC pipes conforming to ASTM-D-1785/89 (sch-80)and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C. |
| 84 | (a)50mm dia PVC pipe |
| 85 | (b)32mm dia PVC pipe |
| 86 | (c)25mm dia C-PVC pipe |
| 87 | Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.(make- Jaguar) |
| 88 | (a)15mm dia CP(SB)Bib cock |
| 89 | (b)15mm dia CP 2 in 1 Bib cock |
| 90 | (c)15mm dia CP Pillar cock |
| 91 | (d)15mm dia CP Angle Stop cock |
| 92 | (e)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 93 | (f)50mm dia PVC F.W Metal Valve |
| 94 | (g)32mm dia PVC F.W Metal Valve |
| 95 | (h)25mm dia PVC F.W Metal Valve |
| 96 | (g)15mm dia CP Extension Piece |
| 97 | (h)15mm dia CP Flange |
| 98 | Supplying all materials,labour,T&P and fixing of rotational moulded polythene cylindrical water storage tank of 2000ltrs capacity conforming to IS:1570/1996 including cutting holes through the tank & fixing mild steel tubes and fittings and providing extra tubes and jamnuts including hoisting upto a height of 5m above GL and placing the tank on required position&providing masonry staging with 1st class KB brickwork in cm(1:6),of 0.46m ht,12mm CP(1:6), RCC beam of 0.25mx0.30mx2.60m in RCC(1:1.5:3)using 12mm bhg chips including centering & shutering,cutting,bending,binding of rods etc and watering,curing,conveyance of all materials to work site including cost of 2000litres water storege tank etc. |
| 99 | Supplying all materials,labour,T&P cutting holes through brick/ stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C. |
| 100 | Supplying all materials,labour,T&P cutting holes in RCC floors, roofs etc.up to 19cm thick for passing GI/PVC pipes fittings and reparing the holes after insertion of pipe etc. with cc(1:1.5:3) including finishing so as to make it leak proof as per direction of E.I.C. |
| 101 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C. |
| 102 | Supplying all materials,labour,T&P and fitting & fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. |
| 103 | 110mm dia PVC pipe |
| 104 | 110mm dia PVC P Trap |
| 105 | 110mm dia PVC S/J/D |
| 106 | 110mm dia PVC D/J/D |
| 107 | 110mm dia PVC Plain Tee |
| 108 | 110mm dia PVC Door Bend |
| 109 | 110mm dia PVC Plain bend |
| 110 | 110mm dia PVC offset |
| 111 | 110mm dia PVC cowl |
| 112 | 125mm dia C.P. Grating |
| 113 | Supplying all materials labour T&P and fixing water closet, squatting pan(Indian type WC pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm hg metal all complete as per the direction of E.I.C. |
| 114 | 580mm Orissa pan(make -Parryware) |
| 115 | Supplying all materials labour T&P and fixing wash down water closet (Anglo Indian water closet)with integral S or P trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cm(1:1)etc. all complete as per specification and direction of E.I.C. |
| 116 | E.W.C. with S Trap with sheet cover(make -Hindware) |
| 117 | Supplying all materials,labour,T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. |
| 118 | Half stall Urinal with Spreader (Parryware/Hindware/Neycer) |
| 119 | 32mm dia Dome waste |
| 120 | Supplying all materials labour T&P and providing Fitting and fixing of Aquaguard)Pure Chill 120PSS UV of size 750x570x1350mm height with water storage capacity of 120litres along with 3no. Of faucets 2for cold water and 1 for normal water including a flow of 1.50ltr/ minute etc all complete as per approved Drawing, specification and direction of E.I.C. |
| 121 | Aquaguard pure chill 120PSS UV |
| 122 | Supplying all materials,labour,T&P and fitting&fixing 10ltr capacity low level flushing cystern with a pair of cast iron or ms brackets complete with fittings such as syphonic arrangements 15mm nominal size brass/ PVC ball valve with polythene float,CP brass handle,union and couplings for connection with inlet,outlet and over flow pipes,32mm dia cp flush bend, 15mm dia.PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. |
| 123 | 10Ltr.Capacity low level cistern |
| 124 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C. |
| 125 | 550mmx400mm WHB with 32mm dia cp west,west pipe,brackets and connection pipe(make- parryware) |
| 126 | Wall mounted Grab bar 600mm long |
| 127 | Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. |
| 128 | CP Towel Ring (make -Parryware) |
| 129 | Supplying all materials,labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E.I.C. |
| 130 | 600mmx450mm BE Mirror |
| 131 | Supplying all materials,labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P.H. specification and direction of E.I.C. |
| 132 | CP Soap holder |
| 133 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. |
| 134 | (125x450)mm size glass-shelf with CP Guard rail(make -Parryware) |
| 135 | Supplying all materials,labour,T&P and cutting holes through brick/ stone masonry walls for taking PVC pipes and fittings including making good the damages etc all complete as per the P.H. specification and direction of E.I.C. |
| 136 | 375mm thick wall |
| 137 | Roof cutting |
| 138 | Supplying all materials,labour,T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C. |
| 139 | Supplying all materials labour T&P and fixing Digital tiles in floors, threads,landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and direction of E.I.C. (Ceramic Floor tiles of Premium grade having Thickness 7mm to 8mm confirming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by E.I.C.) |
| 140 | Supplying all materials labour T&P and fixing porcelain glazed Digital tiles tiles in dados skirting and risers of steps on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.(Ceramic wall tiles of Premium grade having Thickness 6.5mm to 6.7mm confirming to IS 13755 of size 25cm x33cm special printed series to be pre-approved by E.I.C.) |
| 141 | Factory made single leaf rigid FRP(alternately called GRP)sand wich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450gsm E-glass chopped strand mat (CSM)impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS)structural foam panel of 29mm thickness and a density of 20kg/m3 shall be used as core material.Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts, aldrop,handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS:4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/Mahogany/Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 142 | Frame:- |
| 143 | Shutter:- |
| 144 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C. |
| 145 | S.D. PORTION:- |
| 146 | Supplying all materials labour T&P and laying PVC pipe sewer line, Grade-A of the following internal dia in trenches(to level or slope) and jointing with gasket & stiff mixture or cm(1:1),cc(1:3:6)with 40mm size hg metal on bed of the trench & hunching or allround concrete encasing with cc(1:4:8)using 40mm size hg metal including curing,conveyance to worksite,payment of royality,taxes etc and testing all complete as per approved drawing,specification and direction of E.I.C. |
| 147 | 110mm dia PVC pipe with allround Hunch top |
| 148 | Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB brickwork in cm(1:6)moulding&shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flush pointing (1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing,conveyance of all materials to site,payment of royality,taxes etc.all complete as per approved specification and direction of E.I.C. |
| 149 | Inside size 760mm x 760mm x 460mm |
| 150 | Supplying all labour T&P and constructing soakwaypit of the following sizes with dry brick walling from bottom upto invert of inlet pipe & 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork, gravel packing in the rear of well steining RCC cover slab in cc(1: 1.5:3)using 12mm size hg chips fitted handles including ew in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all meterail to worksite,payment of royality,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. |
| 151 | 1.20m dia x 2.00m deep |
| 152 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C. |
| 153 | Initial lift upto 1.50m |
| 154 | From 1.50m to 3.00m depth |
| 155 | Supplying all materials labour T&P and filling foundation and plinth with river sand well watered and rammed including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per the direction of E.I.C. |
| 156 | Supplying all materials labour T&P and providing cc(1:3:6)using 4cm hg metal including watering,curing,conveyance of all materials to work site,payment of royality,taxes etc.all complete as per specification and direction of E.I.C. |
| 157 | Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 158 | Supplying all materials labour T&P and providing Flyash Brick work in cm(1:4)F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8%including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 159 | Supplying all materials labour T&P and providing rigid & smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C |
| 160 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20gauge conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 161 | Supplying all materials labour T&P and providing RCC(1:1.5:3) using 12mm hg chips for RCC works including hoisting,laying, watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 162 | Supplying all materials,labour T&P and providing 12mm thick CP(1:3)with punning on brick/ stone work including watering,curing conveyance of all materials to work site, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 163 | Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6)all complete as per PH specification and direction E.I.C. |
| 164 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 165 | Supplying all materials,labour, T&P and providing fitting&fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3)with 12mm size hg. chips all complete including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 166 | Supplying all materials labour T&P and Providing cement flush pointing (1:3)to brick masonary including watering,curing, conveyance of all materials to worksite etc. all complete as per specification and direction of E.I.C. |
| 167 | Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C. |
| 168 | Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C. |
| 169 | 200mmx150mm Size Bore Well ThroughODEX Method:- |
| 170 | Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated & uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/ 200psi)as required to suit the site conditions as per the direction of E.I.C. including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No) |
| 171 | Drilling of 200mm. dia. Bore- |
| 172 | Drilling 200mm dia. Bore- |
| 173 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials, T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe) |
| 174 | Lowring of 200mm dia MS pipes- |
| 175 | Cost of 200mm dia MS casing pipes- |
| 176 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 177 | 1.00HP Single Phase Submersible Pump Set |
| 178 | Supplying of ISI mark 1.00HP single phase vertical submersible pump set(3Stage head of 20 to 35mtr)with discharge of 1200-1800 ltr/hour and a head of 75-90mtr of reputed make like KSB/Texmo & equivalent including all cost,conveyance and taxes etc all complete as per direction of E.I.C. |
| 179 | Supplying all labour,T&P and fitting and fixing of 1.00HP single phase vetrical submersible pump set with commissioning and testing etc.all complete as per direction of E.I.C. |
| 180 | Supplying fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C. |
| 181 | Supplying all materials labour T&P and fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 182 | Supplying fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 183 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender