Tender For Refurbuising Of Raidihi Phc Under Ama Hospita Building Phase 2 Scheme Under Dmf For The Year 2025-26
Tender Value
89.36 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
11 days left
EMD
89363
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Refurbuising Of Raidihi Phc Under Ama Hospita Building Phase 2 Scheme Under Dmf For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonary in cement mortar above 3.00m height including all costs complete. Stacking the useful materials for reuse and removing the debris 50 mtr lead as per direction of Engineer-in-charge. |
| 2 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead as per direction of Engineer-in-charge. |
| 3 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 5mtr height as per direction of Engineer-in-charge. |
| 4 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed. initial leads and lifts as per the direction of Engineer-in-charge. |
| 5 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete as per the direction of Engineer-in-charge. |
| 6 | Cement Concrete (1:3:6)using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T&P etc complete as per the direction of Engineer-in-charge. |
| 7 | Brick work with Fly Ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation&Plinth including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 8 | Cement Concrete (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete as per the direction of Engineer-in-charge. |
| 9 | R.C.C. M-20 grade with 20mm and down grade C.B. chips including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but cost of reinforcement complete as per the direction of Engineer-in-charge. |
| 10 | Column Base & Footing |
| 11 | Plinth Beam (Grade Beam) |
| 12 | Chajja |
| 13 | Lintel |
| 14 | Column & Beam in Superstructure (GF) |
| 15 | Column & Beam in Superstructure (FF) |
| 16 | Roof Slab (GF) |
| 17 | Roof Slab (FF) |
| 18 | Cutting, straightening, coiled or bent up M.S/T.S rod (HYSD Fe 500) including cutting, bending, binding, welding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steelas per the direction of Engineer-in-charge. |
| 19 | Ground Floor |
| 20 | First Floor |
| 21 | Brick work with Fly Ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Superstructure including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 22 | Ground Floor |
| 23 | First Floor |
| 24 | Supplying M.S Door, Window grill made out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer, all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 25 | Labour charge for fitting,fixing of MS door,window, grill, Gate including all cost etc complete as per the direction of Engineer-in-charge. |
| 26 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Supplying, fitting and fixing Vitrified tile in floors treads or steps and landing of size 1200mm x 600mm Coloured /Printed series (Homogeneous) laid on 25mm thick cement mortar (1:1) 1cement:1 course sand and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge. |
| 33 | Supplying, fitting and fixing Vetrified Industrial tile in floors treads or steps and landing of size 300mm x 300mm laid on 25mm thick cement mortar (1:1) 1cement:1 course sand and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge. |
| 34 | Supplying, fitting, fixing of Glazed tiles of size 600mm x 300mm in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including all costs complete as per direction of Engineer-in-charge. |
| 35 | Supplying fitting, fixing fully glazed aluminum framed fixed windows (Ventilator) using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, etc. with zinc coated wire mesh as per direction of Engineer-in-charge. |
| 36 | Painting 2 coats with any approved paint in new iron works including sand papering, polising surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of Engg-in charge. |
| 37 | Finishing plastered surface of wall surface with Acrylic wall putty (Water based ) & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per the direction of Engineer-in-charge. |
| 38 | Priming 1 coat with wall primer (water bond) of any approved shade including all costs complete as per the direction of Engineer-in-charge. |
| 39 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 40 | Ground Floor |
| 41 | First Floor |
| 42 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats over 1 coat of primer to give an even shade including cost of weather coat all cost of all labours and T&P etc complete as per the direction of Engineer-in-charge. |
| 43 | Ground Floor |
| 44 | First Floor |
| 45 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour as per the direction of Engineer-in-charge. |
| 46 | Supplying & fixing of 80mm thick cement concrete interlocking Paver Block of M-40 Grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018 as per direction of Engineer-in-charge. |
| 47 | Providing and fixing of wall case/wall almirah made with BWR ply wood (ISI) with laminate both side including all type of fittings such as hangle, lock magnet, chain, channel, screw, blot & nuts etc. jointing finishing to a flush bonded with adhesive etc. complete as per direction of the Engineer-in-charge. |
| 48 | Providing and fixing of design table with Cupboard consisting of BWR ply wood (ISI) with decorative laminate including all type of fittings such as handle, locks & nuts etc and jointing, finishing to a flush finish bonded with adhesive etc complete as per direction of the Engineer-in-charge. |
| 49 | Providing, fitting , fixing of PPGL Sheet in roof including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties as per the direction of Engineer-in-charge. |
| 50 | Hoisting joists and trusses and placing in position including cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 51 | Providing and fitting of glass pane (12 mm thick plain Glass) for slinding windows and ventilators including cost of all materials, labour T&P etc complete as per the direction of Engineer |
| 52 | Providing, fitting and fixing up partition walling aluminium anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660as tapered clip and jointing angle No. 1855 etc. as per direction of Engineer-in-charge excluding cost of laminated board. |
| 53 | Providing and fitting of (12 mm thick) Pre-laminated Board Standard Type (ISI) in Aluminium frame of doors, windows & ventilatos etc. including cost of all materials, labour T&P etc complete as per the direction of Engineer-in-charge. |
| 54 | Providing fitting, fixing of Aluminium door with anodized Al. door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board. |
| 55 | Providing Colour & Branding of Health Wellness Centre in weather coat colour with all labour, material, T&P, taxes etc complete as per the direction of Engineer in Charge. |
| 56 | Providing Colour & Branding of Health Wellness Centre door, window border in weather coat colour with all labour, material, T&P, taxes etc complete as per the direction of Engineer in Charge. |
| 57 | Electrical |
| 58 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 59 | -do- (Gr.B) (1.1.2-1.24.2) |
| 60 | -do- (Gr.C) (1.1.3-1.24.2) |
| 61 | Re-wiring to light with 2x1.5 +1.5 sqmm cu wire |
| 62 | -do- (Gr.A) (1.17.1) |
| 63 | -do- (Gr.B) (1.17.2) |
| 64 | -do- (Gr.C) (1.17.3) |
| 65 | Recessed wiring to Fan Point in... |
| 66 | -do- (Gr.B) (1.1.2-1.24.2) |
| 67 | -do- (Gr.C) (1.1.3-1.24.2) |
| 68 | Re- wiring to Fan Point in... |
| 69 | -do- (Gr.B) (1.17.2) |
| 70 | -do- (Gr.C) (1.17.3) |
| 71 | Recessed to Exhaust Fan Point in\ |
| 72 | -do- (Gr.B) (1.17.2) |
| 73 | -do- (Gr.C) (1.17.3) |
| 74 | Recessed wiring to call Bell Point in... |
| 75 | -do- (Gr.C) (1.17.3) |
| 76 | Recessed wiring to Wall Fan Point in... |
| 77 | -do- (Gr.B) (1.17.2) |
| 78 | S/F of M.S. Box for 2 Module 18 swg |
| 79 | S/F of M.S. Box for 4 Module 18 swg |
| 80 | S/F of M.S. Box for 6 Module 18 swg |
| 81 | S/F of M.S. Box for 8 Module 18 swg |
| 82 | S/F of M.S. Box for 12 Module 18 swg |
| 83 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 84 | S/F 5/6 A. modular Switch (1.25.1) |
| 85 | S/F of 3 pin 5/6 A modularSocket (1.25.4) |
| 86 | S/Fof 8 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 1 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch and 01 Nos 6 Pin 15/16 Amp Socket out let 15/16 amp. Piano type modular switch connection,painting etc. as required (1.24.6 + 1.25.1+1.25.4+1.25.3+1.25.5) |
| 87 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 88 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.3+1.25.5) |
| 89 | S/F of Power point with 8 modular metal box with modular base & cover in recess including providing and fixing of 2 nos 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required for Inverter Connection |
| 90 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 91 | S/F of 15A Socket on 2 module for AC |
| 92 | S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover. |
| 93 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 94 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 95 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 96 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.4) |
| 97 | -do- 4x6 sqmm + 2 x 2.5 sqmm (1.8.10) |
| 98 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 99 | Re-Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havells/V-guard) |
| 100 | 2x1.5+1x1.5 (1.19.2+1.19.1) |
| 101 | 2x2.5+1x1.5(1.19.11+1.19.1) |
| 102 | 2x4+1x1.5 (1.19.20+1.19.1) |
| 103 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 104 | S/F of 32 Amp rating \\"C\\" Series DP MCB (Make: L&T/Havells/C&S/Equivalent) |
| 105 | S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 106 | S/F of MCB 12 way Double door (2.3.7) |
| 107 | S/F of MCB 8 way Double door (2.3.6) |
| 108 | S/F of MCB 2 way Single door (2.3.1(b)) |
| 109 | S/F of 63 Amp Four Pole MCB C Series (Make: L&T/Havells/C&S/Equivalent) |
| 110 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 111 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 112 | S/F of Earthingwith GI Pipe 40mm Heavy duty 2.7mtr Electrolyte grade (Cu-ETP) Grade :C 101) coated with Tin and annealed copper plate size 600mmX600mmX3.15mm 10.5kg ,GI funnel covered with wireness duly fabricated and welding with GI Pipe 1 no, Clamp made out of 40X6 mm GI flat- 3 set, fabrication of GI Pipe copper plate and copper flat for a) Perforated hole-18 no. b) threaded hole -12 no., Charcoal 64 kg, common Salt 5 kg, CI hinged top cover 1 no., nut ,bolt and washer -12 sets, Excavation of Earth size 1.35 mm X 0.75mm X 3mm . Construction of Earthing chamber pit size 22\\"x22\\"x18\\"- 3.375 mm |
| 113 | Supply andlaying 8 SWG wire copper loop earthing as required (3.18) |
| 114 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 115 | S/F of Fan hook S, Type on ceiling. |
| 116 | S/F of step type modular fan regulator |
| 117 | S/F of 12 Watt LED Bulb(Make Havells/Polycab or Equivalent) |
| 118 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB |
| 119 | S/F of 10 Watt Bulk Head(Make Havells/Crompton or Equivalent) |
| 120 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 121 | Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 122 | S/F of 24 Watt Recessed Mount or Surface Mount Panel Light In Weight aluminium Body ( Round or Square )Type Ceiling Light (Make Havells or Equivalent) |
| 123 | S/F of 400mm A.C. wall fan with all accessories (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS) |
| 124 | S/F of 2000 VA Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous/Exide |
| 125 | S/F of 1.5T 5Star Inverter type split AC Machine, Make-Carrier /Blue Star /Hitachi |
| 126 | S/F of 4 KVA Voltage Stabilizer(90-300V) for 1.5 Ton AC, Make-Microtech/V-Guard |
| 127 | Supply of 3.5core 35 sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable/equivalent) |
| 128 | Laying of MV cable above 25sqmm to 120 sqmm in ground (5.1.2) |
| 129 | Laying of MV cable above 25sqmm to 120 sqmm on surface (Horizontally)(5.5.2) |
| 130 | S/F of 1 inch HDPE pipe for laying & protection of cable |
| 131 | Supply and fixing of 63 A TPN pannel board 1)63A 4P MCCB with Spreader Ics=100% Ics (MAKE-Legrand/Seimens/L&T/Schneider/ABB)-01 No 2)63A Changeover (Manual)-1 No.(MAKE-Legrand/Seimens/L&T/Schneider/ABB) 3 )63A 4P MCB-4 nos (MAKE-Legrand/Seimens/L&T/Schneider/ABB) 4) 40A C Curve DP MCB -4 No (MAKE-Legrand/Seimens/L&T/Schneider/ABB) 5)SPD ( Type 1+2, 50kA 3P+N-1 No. (MAKE-Legrand/Seimens/L&T/Schneider/ABB) 6) 03 numbers phase indicating lamp with toggle switch and HRC Fuse-(2set)-6 Nos. 7) 1 Set of digital type multifunction meter with CT for Voltage,Current,PF,THD indicated with RS 485Compactivity for bms data. 8) 100A/5 CTS- 6 Nos. 9)100 A Cupper Bus-Bar -4.1 kg (MAKE-Legrand/Seimens/L&T) |
| 132 | CCTV Surveillance System SITC of 16 Channel SMART NVR (Or Above) support 8MP(4K),S+265/H.265,,Support 4 SATA HDDs (upto10TB Each),Support Multi-brand network cameras, Bandwidth Incoming 320Mbps,Outgoing-180Mbps, HDMI & VGA Simultaneous video support,Al by Camera: Face detection and recognition, perimeter protection; SMD Plus; ANPR; people counting; stereo analysis; heat map,detecon alarm is supported, Support cloud upgrade. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/CP PLUS |
| 133 | Supply & fixing of 4MP Bullet IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict . Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/CP PLUS |
| 134 | Supply & fixing of 4MP Dome IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/CP PLUS |
| 135 | Supply of 10TB HK-HDD10T,Audio/Video-24/7 Continuous Operation. Make: Toshiba/Segate |
| 136 | Supply of POE GIGABITE SWITCH 10/100 8Port DS-3E0510P-E/M Make: Honeywell/Hikvision/ Axis/ Plco/CP PLUS |
| 137 | Supply of 4U Wall Mount Rack loaded with one no 3Skt 6/16A power distribution unit, 1no cable manager, 1no 90 CFM FAN, one pkt H/W screw.Basic frame: CRCA (MS SHEET) 0.6mm thick,Construction-Welded,Top & Bottom cover: cable entry cut-outs,Front Door: Lockable-Toughened glass with Lock & Key,Toughened Glass used as an excellent thief deterrent,Standard finish: Powder coated,Dual-Tone Gray Color - fits in well with all indoor /outdoor aesthetics,Differentiator Quality,Load Bearing Capacity - 15kg,Industry leading design. Including all other materials & as directed by site-incharge Make: D-link/Dgisol |
| 138 | Supply CAT6 Armoured Cable,Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801,Excellent Margin with suppression of Cross Talk (NEXT),4 Pair Separator Design,23 AWG cable,For Outdoor installation. Including all other materials & as directed by site-incharge Make: D-link/Finolex |
| 139 | Supply and laying of 20mm pvc conduit in complete & all others accessories are connection as per the direction of engineer incharge . Make: AKG |
| 140 | Supply of HDMI cable Extender |
| 141 | Supply and fixing of 32\\" IPS HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge.with 3yeras warranty.Supply,installation,testing & commissioning of Tv Wall Mount Bracket. Make: Sony ,Samsung,LG |
| 142 | Supply of Wireless mouse |
| 143 | Supply,installation of Rj 45 Connectors Make: Tyco-AMP/ Schneider/ Digisol . |
| 144 | Supply of 5'x5' Camera Box |
| 145 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 146 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 147 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) For Inverter |
| 148 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 149 | Area Lighting |
| 150 | S/F of following 2way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB)2 way single door(2.3.1 b) |
| 151 | S/F of 32A rating C Series DP MCB (Make: L&T/Havells/C&S or Equivalent) |
| 152 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm wiring in existing conduit PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x6 sqmm + 1 x 2.5 sqmm( 1.8.4) |
| 153 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 154 | S/F of 32A DP Switch with indicator(Make-Havells/Equivalent) |
| 155 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3) |
| 156 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 157 | Supply of wire for Street Light 3 X 1.5 sqmm FR PVC Round Sheathed Copper Conductor (MakePolycab or Equivalent ) |
| 158 | Provision of Armoured cable size 2x6sqmm (15) |
| 159 | Laying of MV Cable upto 25sqmm in ground (5.1.1) |
| 160 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 161 | S/F of 40 mm HDPE pipe for laying & protection of cable(Make:Sudhakar or Equivalent) |
| 162 | Supply & Instalation of 6 meter octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 130 mm of 3 mm thickness with Base Plate (225X225X10mm) (MAKE-Bajaj/Utkarsh /RR Ispat/BPP)with Galvanised Double arm detachable 1.5 mtr bracket suitable for 70mm top. with 4 nos of Foundation bolts and nuts (20 mm dia 600-700mm Length) and anchor plate to be mounted on concrete Foundation (1.5'X1.5'X4' high) for errection of Pole firmly as per direction of Engineer in Charge. |
| 163 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 164 | P.A. System Supply & Installation of PA Amplifire with 2 mic point & 1 Aux. point, built in MP3 player with USB reader and remote, 120 watt AC & 12 Volt DC Operation. Make: Ahuja/Bosch/Sennheiser |
| 165 | Supply of high quality ABS wall mount speaker for indoor 6\\" & 6 watt / 100 volt Make: Ahuja/Bosch/Sennheiser |
| 166 | Microphone with cord Make: Ahuja/Bosch/Sennheiser |
| 167 | Microphone stand round base Make: Ahuja/Bosch/Sennheiser |
| 168 | Supply of 2 core 1.5 sq mm Cu. control cable |
| 169 | Smart signage commercial 43\\"TV - BRIGHTNESS 300/400/330 NITS BRIGHTNESS, Smart signage,embedded content management,Embeded group manaaagement, super sign control + welcome image, audio out 10W +10W,Web OS4.0,Miracast, IR OUT,USB, HDMI,LAN,Wifi inbuilt(make -LG/Samsung/Eq) |
| 170 | Glow Sign Board2.5\\"X1.5\\" hallow square aluminum pipe framed cover the aluminum based panel sheet. Setting, bending 2\\"X3\\" hallow square aluminum pipe framed cover the aluminum based panel sheet. Plastics Sheet: - 2.5 mm Plastics Sheet with Colour Reising. Cutting, Bending & setting with designing of Plastics latter displaying L.E.D:- 0.5 to 1.5 Watts with any colour as per the requirement. Power Supply: - SMPS (Switch mode Power Supply), RPS (Regulate Power Supply). In put Voltage 160 to 230 A.C./ Out put Voltage 12/24 Voltas D.C Electrical wiring with L.T. wire for internal wiring of the signboard.L.T.Wires: -0.5 & 1.5 sq mm Flexible wires (Finolex) Auto ON/OFF Switch: - Electronics solid state (+/- 10 Secand), Manual (+/- 15 Minuets) - 1 No as per Engineer-in-charge of approved make including with all materials & labour |
| 171 | Dismantling & removing old tiled flooring including removing the old base&stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the E.I.C. |
| 172 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep,stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the E.I.C. |
| 173 | Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/ chequered tile in floors,treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. . |
| 174 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. |
| 175 | Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. |
| 176 | Initial lift upto 1.5 mtr |
| 177 | From 1.5 mtr to 3.0 mtr depth |
| 178 | Supplying all materials,labour,T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the direction of the E.I.C. |
| 179 | Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 180 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chip including watering, curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 181 | Supplying all materials,labour,T&P and providing cc(1:4:8)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 182 | Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% in cm including watering,curring,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 183 | In Foundation and Plinth in cm(1:6) |
| 184 | In Foundation and Plinth in cm(1:4) |
| 185 | In Super Structure in cm(1:6) |
| 186 | Supplying all materials,labour,T&P and providing cement plaster on brick/ stone work including watering,curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C. |
| 187 | 12mm thick CP in cm(1:6) |
| 188 | 12mm thick CP in cm(1:3) |
| 189 | Supplying all materials,labour,T&P and providing cement plaster with punning on brick/stone work including watering,curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 190 | Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 191 | Supplying all materials,labour,T&P and providing MS reinforcements for RCC work including cutting,bending,binding,straightening and tying the grills and placing in position including cost of binding wire 18 to 20gauge conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 192 | Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 193 | Supplying all materials,labour,T&P and making MS step Iron in 8mm Dia MS steel bars and fixing into walls of Manhole/Septic Tanks duly embeded in cc(1:2:4)etc all complete as per P.H specification and direction of the E.I.C. |
| 194 | Supplying all materials,labour,T&P and providing 50mm thick pre-cast RCC baffle wall in RCC(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position,finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 195 | Supplying all materials,labour,T&P and providing 160mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in PCC(1: 1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 196 | Supplying all materials,labour,T&P and providing 12mm thick cement flush pointing in cm(1:3) to brick masonry works including watering curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the EIC. |
| 197 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 198 | Supplying all materials,labour,T&P for providing cement paint two coats to inside and outside walls to give even shade including conveyance of all materials to work site,taxes etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 199 | Supplying all materials,labour,T&P and Factory made FRP(alternately called GRP)door frame of size 75mmx100mm fabricated using E-glass chopped strand mat(CSM)UV stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be less than 2.00mm.The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,Six numbers of 260mmx25mmx5mm size 'S' shaped MS flat hold fast shall be provided with the frame.The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications.The finish of doorframe will be plain colour white/Ivory/ Beige/Light grey/Golden brown/Mahogany/Teak wood/sand stone/ Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C. |
| 200 | Supplying all materials,labour,T&P and Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450gsm E-glass chopped strand mat (CSM)impregnated with orthopthalic palyester resin.The thick ness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS)structural foam panel of 29mm thickness and a density of 20kg/cumtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts,aldrops,handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the sal wood reiforcements and the skins.The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/Mahogany/Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 201 | Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 4985/2000 to walls with nails,bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer's specification testing etc all complete as per P.H specification and direction of the E.I.C. |
| 202 | 110mm diameter U-PVC SWR pipes |
| 203 | 110mm U-PVC P-trap |
| 204 | 110mm U-PVC SWR double junction door |
| 205 | 110mm U-PVC SWR Single junction door |
| 206 | 110mm U-PVC SWR door bend |
| 207 | 110mm U-PVC SWR Offset |
| 208 | 110mm U-PVC SWR plain bend |
| 209 | 110mm U-PVC SWR vent cowl |
| 210 | 125 mm dia C.P Grating |
| 211 | Supplying all materials,labour,T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cm(1:4)etc all complete as per P.H. specification and direction of E.I.C. |
| 212 | 375mm thick wall |
| 213 | Supplying all materials,labour,T&P and fixing water closet,squatting pan(Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size HG metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification&direction of the E.I.C. |
| 214 | 580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 215 | Supplying all materials,labour,T&P and fixing wash down water closet (EWC)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. |
| 216 | (a)EWC with P and S trap plain with PVC Seat cover Nycer Cera Hindware Parryware |
| 217 | (b)Wall mounted Grab bar 600mm long |
| 218 | Supplying all materials,labour T&P and fixing wash basins with CI/MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs,screws and cement etc,fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,fixing 32mm dia CP brass waste, etc all complete as per specification&direction of the E.I.C. |
| 219 | 550mmx400mm WHB with 32mm dia CP west,west pipe,brackets and connection pipe .(make- parryware) |
| 220 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. |
| 221 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. |
| 222 | 20mmx450mm long CP towel rail |
| 223 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. |
| 224 | Supplying all materials,labour,T&P and fixing standard size Acrylic Shelf complete with CP brass brackets and guard rails fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. |
| 225 | Supplying all materials,labour,T&P and constructing Gully Trap chamber of the following inside size with 8cm thick precast cover slab in cc(1:2:4)mix using 12mm size HG chips,foundation concrete(1:4:8) using 40mm size HG metal on bed and around trap,1st class KB brickwork in cm(1:6)in F&P and inside 12mm thick CP(1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 226 | Supplying all materials,labour,T&P and constructing Inspection chamber of the following sizes with cc(1: 3:6)using 40mm size HG metal on bed,1st class KB brickwork in cm(1:6)moulding&shaping the channel inside and benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick CP(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC cover slab in cc(1:1.5:3)using 12mm size HG chips with RCC manhole cover,earthwork excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved specification and direction of E.I.C. |
| 227 | Inside size 760mm x 760mm x 460mm |
| 228 | Supplying all materials,labour,T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method cc(1:3:6)using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with cc(1:4:8) using 40 mm size HG metal,earthwork in excavation in trenches in all kinds of soil,refilling the same in a layer of 0.30mtr with watering,ramming and removing of surplus earth testing the SW pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. |
| 229 | 110mm dia PVC Pipe Swerage line with allround encasing(I.S.4985/2000-4Kg/cm2) |
| 230 | 160mm dia PVC Pipe Swerage line with allround encasing(I.S.4985/2000-4Kg/cm2) |
| 231 | Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonry brick work,gravel packing in the rear of well steining,RCC cover slab in cc(1:1.5:3)using 12mm HG chips, fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering,curing,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 232 | 1.20m diax 2.00m deep soakway pit |
| 233 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46mtr height in staging, 12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering, bending and binding of rod etc watering,curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 234 | 1000 lits capacity on the roof of Ground floor |
| 235 | Supplying all materials,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets& jamnuts including hoisting upto a height of 5mtr above GL and placing the tank in required position including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 236 | 1000 lits capacity on the roof of Ground floor |
| 237 | Supplying all materials,labour,T&P and providing & fixing to wall or ceiling or floor PVC pipes conforming to ASTM-D-1785/89(csh-80)and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. |
| 238 | 20mm dia C-PVC pipes(Sh-80)(Internal) |
| 239 | 25mm dia C-PVC pipes(Sh-80)(External) |
| 240 | Supplying all materials,labour,T&P and cutting holes through existing brick/ stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cm(1:4)etc. all complete as per P.H. specification and direction of E.I.C. |
| 241 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and fittings and repairing the holes after insertion of pipes etc with cc(1:3:6)including finishing with 12mm CP(1:3) complete so as to make it leak proof etc. all complete as per PH specification and direction of E.I.C. |
| 242 | Supplying all materials,labour,T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. |
| 243 | 15mm dia CP Bib Cock(Short body)(Jquar Fittings) |
| 244 | 15mm dia CP Bib Cock(Long body)(Jquar Fittings) |
| 245 | 15mm dia CP 2-in-1 Bib Cock(Jquar Fittings) |
| 246 | 15mm dia CP Health Fuccet |
| 247 | 15mm dia CP Angle Stop Cock(Jquar Fittings) |
| 248 | 15mm dia CP Pillar Cock (Elbow) |
| 249 | 25mm dia PVC fullway valve |
| 250 | 15mm dia CP Flange |
| 251 | Supplying all materials labour T&P and providing Fitting and fixing of Aquaguard of REVIVA RO+UV+ MTDS with cool and hot Provision etc all complete as per approved quality and specification and direction of E.I.C. |
| 252 | Supplying all materials,labour T&P and fitting and fixing 10ltrs capacity PVC low level flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ballvalve with polythene float,CP/brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. |
| 253 | 10 lit PVC L/L Cistern |
| 254 | 200mmx150mm Size Bore Well Through DTH Method:- |
| 255 | Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs (600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No) |
| 256 | (a)Drilling of 200mm. dia. Bore- |
| 257 | (b)Drilling 200mm dia. Bore- |
| 258 | Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00m depth and fitted and fixed in perfecty vertical position including cutting 7 threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I)supplied by the contractor (including cost of pipe) |
| 259 | (a)Lowring of 200mm dia pipes- |
| 260 | (b)Cost of 200mm dia PVC casing pipes- |
| 261 | Cleaning & developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 262 | 1.00HP Single Phase Submersible Pump Set |
| 263 | Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent)Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 264 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 265 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per PH Specification and direction of E.I.C. |
| 266 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 267 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stain less steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 268 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 269 | Supply of all materials,labour,T&P and fitting & fixing of 5KW automatic voltage stabilizer having range from 50Volt to 220Volt suitable to run 1.00HP Submersible pump set including electrical connection from the existing mains & with the control panels of the pump set etc.all complete as per specification and direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender