Tender For Provn Of Store Room For Urc At Cod Jabalpur And Provn Of Guard Room At Nehra Chowk Of Cod Under Ge (E) Jabalpur
Tender Value
41.26 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
2 days left
EMD
82527
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room For Urc At Cod Jabalpur And Provn Of Guard Room At Nehra Chowk Of Cod Under Ge (E) Jabalpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out all kind of soil the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. |
| 3 | Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and directed. |
| 4 | Removing excavated material exc. 50m but n exc. 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 5 | M& L for ATT Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed.(Area of the sub structure in contact with backfill to be measured) |
| 6 | M &L for ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 7 | M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 8 | M & L for ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation / filling in sub base of floor and mass concrete complete all as specified and directed. |
| 10 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 11 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Columns, pillars, piers, posts, and struts complete all as specified and directed. |
| 12 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Beams , cantilivers , bressummers, lintles over 1.5 M span complete all as specified and directed. |
| 13 | M&L for RCC M-25 Design Mix as in slab supported on walls, beams and columns in floors roofs landings balconies canopies, deck slabs and in shelves complete all as directed. |
| 14 | M&L for RCC M-25 (desing mix) using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and mass concrete all as specified and as directed. |
| 15 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed. |
| 16 | Use and waste of formwork rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars, posts, struts, piers etc.complete all as specified and directed. |
| 17 | Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bressummers, lintels, shelves etc. including supports, overhangs, etc, complete all as specified and directed. |
| 18 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as spd and directed. |
| 19 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batterfor rough finished flat surfaces complete all as specified and as directed. |
| 20 | S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl crancking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 21 | S & F TMT bars 8 mm dia , cut to length, bent to shape as required including crancking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 22 | All as per item No 21 here-in-before but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc. |
| 23 | Material and labour for brick work with old size fly ash brick straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 24 | M&L for 10 mm thick plaster in CM (1:6) finished even & smooth with trowel without using extra cement shall be provided over all internal surfaces of wall complete all as specified and directed. |
| 25 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note: Liquid WPC will be measured and paid separately. |
| 26 | M&L for applying two coats of cement base paint on wall or concrete over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 27 | Suppliy only Liquid water proofing compound. |
| 28 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint & including 2 mm wall care putty complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m internal and corner complete all as specified and directed. |
| 30 | M&L for Moorum/red bajri filling, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.Note: Consolidated thickness shall be measured. |
| 31 | M&L for broken stone/boulders for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick in two layers watered and rammed to true surface complete all as specified and directed. |
| 32 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor complete all as specified and directed. |
| 33 | M&L for 20-25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 34 | All as per item No 33 here-in-before but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 35 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and directed. |
| 36 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheert strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 37 | S&F Mild Steel conduit with PVC Coating, fancy type, as in curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 38 | S&F Mild Steel bracket with PVC Coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 39 | S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top), minimum triple layer, hoisted and fixed in position, complete all as specified and directed. |
| 40 | S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimum weight 210 gm etc all as specified and directed. |
| 41 | S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 42 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exc 4 kg/sqm complete all as sepecifed |
| 43 | M&L for cutting channels, grooves or rebates exc 15cm girth,but n exc 30 cm and trimming surface all as specified and directed. |
| 44 | S&F 15mm bore GI tubing, medium grade, galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed. |
| 45 | S&F 20mm bore GI tubing, medium grade, galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed. |
| 46 | S&F stainless steel soap dish, of standard size and shape complete all as specified and directed. |
| 47 | S&F vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified and directed. |
| 48 | S&F Bib tap 15mm bore fancy type chromium plated , cast copper alloy with crutch or butterfly handle screwed down for iron pipes all as specified and as directed. |
| 49 | S&F 15mm Stop valves (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and directed. |
| 50 | S&F 15mm Angle valves (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and directed. |
| 51 | S & F 20 mm dia ball valve with iron wheel head screwed both for GI pipe complete all as specified and directed. |
| 52 | S&F CP Towel rail 600 mm long fixed with an incl chromium plated brass screws and wooden cleat (min wt 190 gms) complete all as specified and directed. |
| 53 | Supply and fix PVC connection 15mm size with PTMT nut of length 450 mm complete all as specified and directed. |
| 54 | S&F for brass chromium plated shower rose 125mm size chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 55 | S & F CP health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 56 | S& F for CP jet sprey of length 1.25 m long fixed in position complete all as specified and directed |
| 57 | Supply and fix 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified and directed. |
| 58 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass shelf assembly complete all as specified and directed. |
| 59 | S&F vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed. |
| 60 | S&F 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle including bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 61 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 62 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 63 | S&F PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed |
| 64 | S&F PVC(SWR) Tee of 110mm dia etc complete all as specified and directed |
| 65 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed. |
| 66 | S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 67 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work (reinforcement to be measured and paid separately) complete all as specified and as directed. |
| 68 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note : Stainless Steel butt hinges & necessary S.S screws shall be paid separately. |
| 69 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) skelton door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note : The rate is inclusive of stainless steel mesh. |
| 70 | Extra for forming fair finished channel 30 cm inner girth in cement concrete using extra cement including mitered stopped ends etc complete all as specified and directed. |
| 71 | S&F 150mm dia Salt-glazed stoneware drain pipe laid in trenches and jointed with lead joint water tightened complete all as specified and directed |
| 72 | M&L for concrete bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested in cement conrete 1:3:6 type C-2 around 150mm dia complete all as specified and directed. |
| 73 | M&L for On Site LLDPE Septic Tank designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below the foundation, with Vent shaft, with connection etc, complete for 05 Users complete all as specified and directed. |
| 74 | M&L for construction of soakage well of size 1.2m dia and 1.5m effective depth complete all as specified and directed.Note: Excavation in hard dense soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25 interconnecting pipes of RCC complete filled with brick bats complete all as specified and directed. |
| 75 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 76 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 77 | M & L preparation of new surfaces of any description not otherwise described over 10 cm width or girth of steel surfaces at any height and applying two coat of synthetic enamel paints complete all as specified and directed. |
| 78 | Providing and fixing of double rebate openable/fixed windows (Eco 4000) made of galvanized steel colour coated/powder coated (base steel as per IS 513 of \\"D\\" quality, gavanized as per lS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50- 60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 X 20 mm and the fixed glass beading section 12x 12 mm, outer frame and mull ions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4 mm thick plain clear glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc.all as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 79 | Provinding and fixing of Ventilators Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls including including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc by means of self expanding ScrewSll as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 80 | S&F 125 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 81 | S&F 125 mm size stainless steel butt hinges, extruded aluminium alloy with stainless steel hinge pin complete all as specified and directed. |
| 82 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 83 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 84 | S&F 250mm sliding door bolt of Aluminium alloy anodised complete all as specified and directed. |
| 85 | M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-40 Grade with grey cement and pigment over stone dust filling complete all as directed.(Sand shall be measured and paid separately) |
| 86 | M&L for cement concrete in surface channels and drains concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and directed. |
| 87 | Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face complete all as specified and directed. |
| 88 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed. |
| 89 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified. |
| 90 | Surface excavation in soft / loose soil nexc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 91 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foudations etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil etc complete all as specified and as directed |
| 92 | Excavation in trenches not exceeding 1.50 mtr wide and exceeding 1.50 mtr but not exceeding 3.00 m in depth for foudations etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil etc complete all as specified and as directed |
| 93 | M&L for excavating over area, n exc 1.5 mtr deep and getting out in soft/loose soil complete all as apecifed and directed. |
| 94 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/ cladding towall, fixed with self tapping screws complete all as specified and directed. |
| 95 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/ clading to wall, fixed with self tapping screws, complete all as specified and directed. |
| 96 | S&F rolled Mild steel conforming to Fe-410 gde 250 as in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 97 | S&F rolled Mild steel conforming to Fe-410 gde 250 as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and directed. |
| 98 | S&F rolled Mild Steel conforming to Fe-410 gde 250 as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 99 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n. exc, 30 cm long of 20 mm dia complete all as specified and directed. |
| 100 | M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 101 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be drawn through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- |
| 102 | One light point controlled by one way switch 5/6 amps. |
| 103 | One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 104 | One socket out let 5/6 amps point on the same board |
| 105 | One socket out let 5/6 amps point on the independent board |
| 106 | All as per item No 101 here-in-before but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 107 | S&F switch piano flush type 5/6 amps white/ivory single pole one way complete all as specified and directed. |
| 108 | S&F socket 3 Pin, 5/6 amps, white/ivory finish flash type complete all as specified and directed. |
| 109 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 111 | S&F ceiling rose, bakelite, surface type, 220/240 volts, 65x20mm, three terminals complete all as specified and directed. |
| 112 | S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed |
| 113 | S&F stepped type electronic fan regulator flush type 120 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 114 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and provision of 3 core flexible multistranded copper conductorof size 0.75 Sqmm from ceiling rose to fan all as specified and directed. |
| 115 | Supply and fix of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 116 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral, 240 Volt with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators complete all as specified and directed by Engr-in-Charge. Note : MCBs will be Measured separately |
| 117 | Supply and fix 240V 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40 Amps current carrying capacity in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 118 | Supply and fix 240V 10KA 'C' curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 119 | S&F IP 20, Class I, LED Mirror light fitting10 W, (or nearest next higher wattage) min 120 LM/watt, natural white(4000K)/ cool white (6500k), wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size etc complete all as specified and directed. |
| 120 | S&F IP 20, Class I, Smart bright Batten Series, LED luminaire using LEDs 20 watt min 120 LM/watt, natural white(4000K)/ cool white (6500k), with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall/ceiling mounting fixed with 02 Nos of PVC round/ square blocks, screws etc(supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 121 | Supply & fix LED Security Light Luminaire 35 watt with 2500 or more lumen warm white/cool day ligh with, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of wall fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint, including PVC flexible hose pipe as per required length. complete all as specified and as directed. |
| 122 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 123 | S & F switch socket combination 2 in 1, 3 Pin, 15 A flush type universal, ISI marked, complete all as specified and directed |
| 124 | Excavation in trenches for laying of cables/pipe, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified ad dirtected. |
| 125 | Removing excavated materials not exc 50 mtr and depositing where complete all as specified ad dirtected. |
| 126 | M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness shall be considered for payment as per para 19.75 of SSR Part-I) |
| 127 | M & L for burnt clay fly ash building bricks laid flat in trenches over sand cushioning for cable protection complete all as speciffied and directed. |
| 128 | S & F 40 mm dia GI Pipe light grade for cable protection passing under road/floor or for fixing to poles all as complete all as specified and directed. |
| 129 | Supply, Laying & testing and commissioning LT underground cable 1100 volts grade, 35 Sqmm 2 Core LT XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trences/ducts, on poles etc of size complete all as specified and directed. |
| 130 | M&L earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earh pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, all as shown in electrical plate No 5, connected to earthing test point including excavation/earth work in any type of soil, PCC 1:3:6 type C-2 in pit and CI pit pit cover including funnel covered with wire mess and handle duly reinforced with 6 mm round bars both ways @ 125 mm c/c, GI protection pipe 15mm bore light grade and watering pipe 20mm bore medium grade complete all as specified and directed. |
| 131 | Supply, Laying & testing and commissioning LT underground cable 1100 volts grade, 16 Sqmm 2 Core LT XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trences/ducts, on poles etc of size complete all as specified and directed. |
| 132 | M&L for GI tubing medium grade with all fittings laid in trenches for 25 mm bore of pipe of completed all as specified and directed. |
| 133 | M&L for GI tubing medium grade with all fittings laid in trenches for 20 mm bore of pipe of completed all as specified and directed. |
| 134 | S&F GI tubing medium grade with all fittings fixed on wall for 20 mm bore of pipe of following sizes completed all as specified and directed. |
| 135 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge. |
| 136 | M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge. |
| 137 | Schedule of credit amount of Rs 0.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender