Tender For Certain Repair Of False Ceiling, Roof, Sunken Floor And Other B/R Works Of Restricted And Unrestricted Area Of Cod Under Age B/R-Ii Of Ge (East) Jabalpur
Tender Value
49 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
21 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair Of False Ceiling, Roof, Sunken Floor And Other B/R Works Of Restricted And Unrestricted Area Of Cod Under Age B/R-Ii Of Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Unrestricted Area |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Non Skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. . |
| 4 | M&L for Non Skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 5 | M&L for Glazed coloured ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 6 | Taking down old existing water proofing treatment on roof surface (Horizontal & Vertical surfaces), including properly cleaning & drying the concrete surfaces complete all as specified and directed. |
| 7 | M&L for Water Proofing Treatment on \\"Non Approachable/Non Accessible and Approachable Roof\\" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer complete all as specified and directed. |
| 8 | M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces complete all as specified and directed. |
| 9 | M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm complete all as specified and directed. |
| 10 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed. |
| 11 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction complete all as specified and directed. |
| 12 | M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint complete all as specified and directed. |
| 13 | M&L for cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement & no pigment over & including 15 mm thick screed bed or bedding layer of 1:4 cement mortar for laying floor finishes complete all as specified and directed. |
| 14 | M&L for providing Cement Concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, roof padding, sunken slab, benching, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with liquid water proofing compound (water proofing compound to be measured & paid separately as supply only) complete all as specified & directed. |
| 17 | Supply only liquid water proofing compound ISI marked complete all as specified & as directed. |
| 18 | M&L for 100 mm thick, cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. |
| 19 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum triple layer, 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 20 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum triple layer, 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 21 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 22 | S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 23 | S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 24 | S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 25 | S&F in repair PVC tank cover for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed. |
| 26 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed. |
| 27 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 28 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 29 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 30 | S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls or ceilings or laid in floors complete all as specified and directed. |
| 31 | S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls or ceilings or laid in floors complete all as specified and directed. |
| 32 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe complete all as specified and directed. |
| 33 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe complete all as specified and directed. |
| 34 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 250 ltr & not exc 500 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 35 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 500 ltr & not exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 36 | S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed. |
| 38 | Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed. |
| 39 | S&F in repair, Chromium plated angular stop cock with wall flange for 15 mm bore of pipe complete all as specified and directed. |
| 40 | S&F in repair, chromium plated two-way Bib cock for 15 mm bore of pipe complete all as specified and directed. |
| 41 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 42 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 43 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 44 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed. |
| 45 | S&F in repair, 32 mm bore, PVC waste pipe for wash basin/kitchen sink etc complete all as specified and directed. |
| 46 | S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc complete all as specified and directed. |
| 47 | S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 48 | S&F in repair, chromium plated grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed. |
| 49 | S&F in repair, toilet seat/commode Jet spray (regular type) (1.50 meter) stainless steel grade 304 (Built-in Installation type) for 15 mm dia of bore of pipe complete all as specified and directed. |
| 50 | S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete in all respect complete all as specified and directed. |
| 51 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 52 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 53 | S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 54 | S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed. |
| 55 | S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 56 | S&F in repair, internal fitting for 10 ltrs capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed. |
| 57 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 58 | S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 59 | S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 60 | S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed. |
| 61 | S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 62 | S&F in repair, 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and directed. |
| 63 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 64 | S&F G.I. powder coated snap grid frame work for false ceiling to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia G.I. hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I. flat 40 mm x 3 mm, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long & 4 mm thick Non asbestos fibre board (E-board or V-board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed. |
| 65 | Supplying & laying of 20 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 66 | Supplying & laying of 25 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 67 | Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete. |
| 68 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified |
| 69 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified |
| 70 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed. |
| 71 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as speicified and directed |
| 72 | S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe290-0 (Gde-165) complete all as specified and directed. |
| 73 | S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20mm of the length indicated) GDE Fe 410-O W (Gde E-250) quality 'A' complete all as specified and directed. |
| 74 | Restricted Area |
| 75 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 76 | M&L for Non Skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 77 | M&L for Non Skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 78 | M&L for Glazed Coloured ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 79 | Taking down of old existing water proofing treatment on roof surface (Horizontal & Vertical surfaces), including properly cleaning & drying the concrete surfaces complete all as specified and directed. |
| 80 | M&L for Water Proofing Treatment on \\"Non Approachable/Non Accessible and Approachable Roof\\" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer complete all as specified and directed. |
| 81 | M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces complete all as specified and directed. |
| 82 | M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm complete all as specified and directed. |
| 83 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed. |
| 84 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction complete all as specified and directed. |
| 85 | M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint complete all as specified and directed. |
| 86 | M&L for cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement & no pigment over & including 15 mm thick screed bed or bedding layer of 1:4 cement mortar for laying floor finishes complete all as specified and directed. |
| 87 | M&L for providing cement concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, roof padding, sunken slab, benching, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 88 | Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all specified and directed. |
| 89 | M&L for rendering 15 mm thick in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with liquid water proofing compound (water proofing compound to be measured & paid separately as supply only) complete all as specified & directed. |
| 90 | Supply only liquid water proofing compound ISI marked complete all as specified & as directed. |
| 91 | M&L for 100 mm thick, cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. |
| 92 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum triple layer, 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 93 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum triple layer, 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 94 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 95 | S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 96 | S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 97 | S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 98 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed. |
| 99 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 100 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 101 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 102 | S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls or ceilings or laid in floors complete all as specified and directed. |
| 103 | S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls or ceilings or laid in floors complete all as specified and directed. |
| 104 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe complete all as specified and directed. |
| 105 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe complete all as specified and directed. |
| 106 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 250 ltr & not exc 500 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 107 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 500 ltr & not exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 108 | S&F in repair 15 mm bore, Fancy type, Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 109 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 110 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 111 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 112 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed. |
| 113 | S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc complete all as specified and directed. |
| 114 | S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 115 | S&F in repair, chromium plated grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed. |
| 116 | S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed. |
| 117 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 118 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 119 | S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 120 | S&F in repair, Vitreous china squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed. |
| 121 | S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 122 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 123 | S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 124 | S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 125 | S&F in repair, Brass chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed. |
| 126 | S&F in repair, 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and directed. |
| 127 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 128 | S&F G.I. powder coated snap grid frame work for false ceiling to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia G.I. hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I. flat 40 mm x 3 mm, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long & 4 mm thick Non asbestos fibre board (E-board or V-board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws. complete all as specified and directed. |
| 129 | Supplying & laying of 20 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 130 | Supplying & laying of 25 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 131 | Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete all as specified and directed. |
| 132 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 133 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified |
| 134 | S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 135 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed. |
| 136 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as speicified and directed |
| 137 | M&L for comprehensive service and repairing small parts of rolling shutter including lubrication and general maintenanace of rolling shutter to ensure smooth, quiet and reliable operation. Throroughly clean the tracks and check physical intrgrity of the shutter, curtain side locks and end caps and repair or replaced small damaged parts and apply high gradelubricant ro all moving mechanical parts and perform multiple test cycle to ensure seamless noise free movement with no binding and tight complete all as specified and directed. |
| 138 | S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 139 | S & F in repair ball bearing for rolling shutters complete all as specified and directed. |
| 140 | S & F in repair 1.25 mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 141 | S & F in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 142 | S & F in Repair 1.25 mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with chain wheel and hand chain complete all as specified and directed. |
| 143 | S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe290-0 (Gde-165) complete all as specified and directed. |
| 144 | S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20mm of the length indicated) GDE Fe 410-O W (Gde E-250) quality 'A' complete all as specified and directed. |
| 145 | Schedule of credit amount of Rs 366722.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender