Tender For Special Repairs To Community Hall At Dad Residential Accommodation And Provision Of Parking Shed Behind Of G Building, Dad Residential Complex, Kanjurmarg, Mumbai Under Ge (Nw) Bhandup
Tender Value
38 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Community Hall At Dad Residential Accommodation And Provision Of Parking Shed Behind Of G Building, Dad Residential Complex, Kanjurmarg, Mumbai Under Ge (Nw) Bhandup
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M & L for excavating in post holes in soft / loose soil (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed by Engineer-in charge. |
| 3 | M & L for broken stone or boulders hardcore of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed by Engineer-in-charge. |
| 4 | Removing excavated soil material exceeding 250 m and not exceeding 500 m and depositing where directed complete all as specified and directed. |
| 5 | Excavation in trenches in hard / dense soil, not exceeding 1.5 m in depth and not exceeding 1.5 m wide and not exceeding 10 sqm on plan and getting out complete all as specified and directed. |
| 6 | M & L for cement concrete in foundations, filling and mass concrete (1:4:8) type D2 using (40 mm graded aggregate) complete all as specified and directed. |
| 7 | M & L for precast cement conrete block masonry with solid blocks of (1:3:6) type C1 using (20 mm graded aggregate), exceeding 10 cm in width setting in cement mortar (1:4) complete all as specified and directed. |
| 8 | M & L for rendering 15mm thick plaster in cement mortar (1:4) on brick or concrete block masonry walls, finished even and fair without using extra cement complete all as specified and directed. |
| 9 | M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer etc complete all as specified and directed. |
| 10 | M & L for cement concrete (1:3:6) type C2 (using 40 mm graded aggregate) as in post holes complete all as specified and directed by Engineer-in-Charge. |
| 11 | S & F in MS steel work in tubular trusses for sign board posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified as directed. |
| 12 | S & F Pre-coated galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 13 | M & L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 14 | M& L for 100 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed. |
| 15 | M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 16 | M & L for Machine pressed (LAQUER FINISH) cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade, of pattern and colour as approved by GE complete all as specified and directed. |
| 17 | Taking down cement plaster or lime plaster on walls / ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris outside MD land including necessary scaffoldings etc complete all as specified and directed. |
| 18 | Taking down chowkats or frames, exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) including taking down of hold-fasts by cutting / chasing etc from existing surfaces and also grills / guard bars (where exists) complete all as specified and directed. |
| 19 | Taking down chowkats or frames, not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) including taking down of hold-fasts by cutting / chasing etc from existing surfaces and also grills / guard bars (where exists) complete all as specified and directed. |
| 20 | Demolition of cement concrete in ground floors (un-reinforced) and paving not exceeding 15 cm thickness (below or above ground level) including removing debris outside MD land complete all as specified and directed. |
| 21 | M & L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed. |
| 22 | Demolition of cement concrete (reinforced) as in roofs, shelves, chajjas, floors (other than ground floors), beams, staircase, landing, chajjas, parapet, water tank and similar suspended work etc. and removal of rubbish / demolished materials outside MD land complete all as specified and directed. |
| 23 | M & L for cement plaster 20 mm thick in CM (1:4), two coats using factory manufactured premix / ready mix of 'Roofit Mix' of M/s Premier Floor to Roof Materials pvt ltd / 'Easy plast' of M/s Walplast Products pvt ltd / 'Readiplast' of M/s Ultratech Cement Ltd / 'Soundplast PMC-1' of M/s Sound buildcare pvt Ltd /, Fosroc or other approved equivalent make, having minimum composition of C:S : : 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metallic tray only to make good consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces with base coat of 15 mm thick and finishing coat of 5 mm thick final rendering, including using richer mix for making corners if necessary, including water proffing compound at 3 % wt of cement at all floors and level, including making grooves of existing size wherever required, including providing galvanized hexagonal chicken wire mesh 19 to 22 guage at RCC & brick in joints, including cleaning the surfaces, curing etc complete all as per specifications & as directed by the Engineer-in-charge.Note: Water proofing compound will be measured and paid seperately |
| 24 | M & L for rendering 10 mm thick using factory manufactured premix / ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd / 'Easy plast' of M/s Walplast Products Pvt Ltd / 'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound buildcare Pvt Ltd / Fosroc or other approved equivalent make, having minimum composition of C:S : : 1: 6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the manufacturer and applied over masonry and concrete surfaces, etc. complete all as specified & directed by Engineer-in-Charge. |
| 25 | M & L for rendering 5 mm thick on ceiling using factory manufactured pre mix / ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd / 'Easy plast' of M/s Walplast Products Pvt Ltd / 'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound build care Pvt Ltd / Fosroc or other approved equivalent make, having minimum composition of C:S : : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces, etc. complete all as specified & directed by Engineer-in-Charge. |
| 26 | M & L for preparation of new plastered surfaces of internal walls and applying two coat of oil bound distemper including application of 3 mm thick wall care putty and one coat of primer for smooth finish complete all as specified and directed. Make - Asian / Berger or techno commercial equivalent as approved by GE. |
| 27 | M & L for preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper including application of 3 mm thick wall care putty and one coat of primer for smooth finish complete all as specified and directed. Make - Asian / Berger or techno commercial equivalent as approved by GE. |
| 28 | M & L for complete removal of old internal wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller two coat of oil bound distemper including application of 3 mm wall care putty and one coat of primer for smooth finish complete all as specified and directed. Make - Asian / Berger or techno commercial equivalent as approved by GE. |
| 29 | M & L for complete removal of old surface of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying two coat of oil emulsion distemper and one coat of primer for smooth finish complete all as specified and directed. Make - Asian / Berger or techno commercial equivalent as approved by GE. |
| 30 | Material & Labour for new surfaces of external walls, soffits and fascias of chajjas etc and applying one coat of Dr Fixit Primeseal Primer after an interval of 4 hrs and applying two coats of Dr Fixit Raincoat Star or equivalent make after throughly cleaning, washing and saturation of surface with water and filling of external hairline cracks upto 5 mm with Dr Fixit Crack-X Paste including necessary erecting & dismantling of scaffolding complete all as specified and as directed. |
| 31 | M & L for fixing factory made 100% solid WPC (Wood Polymer Composite) - Door Frame 100 mm x 50 mm single rebated, made from wood polymer composite (single extruded process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), calcium carbonate and natural Fibers (Wood Powder / Rice Husk / Wheat Husk) and non toxic additives fabricated with meter joint after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity Screw Withdrawal strenght of min. 990 N0, minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof, water / moisture proof & fore retardent & fixed in position with SS Dash fasteners / hold fast of required dia and length, all as per specification drawing complete all as specified and directed by the Engineer-in-charge. Note: Material test certificate and authentication should be compulsory provided by the manufacturing. |
| 32 | S & F factory made 28 mm thick 100 % solid WPC (Wood Polymer Composite) - Laminated Flush Door Shutter of required size comparising of virgin PVC resin of K Value 57-60 (Suspension Grade), calcium carbonate and natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives, made from Extrusion process WPC foam sheet single Extruded (inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (screw withdrawal strenght of 50 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof, water / moisture proof & fore retardent. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges (will be paid seperately) of required size with necessary full body threaded star headed counter sunk SS screw all as per specification and drawing complete all as specified and directed by the engineer-in-charge. Note : Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 33 | S & F bands, straps, supports or stays for rainwater, hold fasts etc and similar small articles made out of mild steel flat etc of grade Fe-290 Gde - E-165 etc complete all as specified and directed. |
| 34 | M & L for PCC (1:2:4) type B1 cement concrete as in bed blocks etc for hold fasts etc including provision of necessary form work, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | M & L for PCC (1:2:4) type B1 cement concrete as in bed blocks etc for hold fasts etc including provision of necessary form work, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender