Tender For Repair To Certain Roads And Allied Services Incl Road Furniture Under Ge Clement Town
Tender Value
34.50 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
17 days left
EMD
69000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Roads And Allied Services Incl Road Furniture Under Ge Clement Town
BOQ
| Sl. No. | Item Description |
| 1 | M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, and making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder VG-30 grade @9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm. complete all as specified and directed. |
| 2 | M&L Preparing existing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc and applying evenly a priming tack coat with paving Bitumen VG-30 grade over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed. |
| 3 | M&L premix bituminous macadam laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed.(Note- Mix Shall be obtained from automatic hot mix plant and shall be laid by mechanical paver) |
| 4 | M&L for bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed.NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula by GE before commencement of work irrespective of what ever indicated in Sch 'A'.(ii) Price adjustment shall be done on MINUS side only @ Rs. 65,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'.(iii) No Price adjustment for Bitumen shall be done for variation on plus side.(iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account. |
| 5 | M&L Preparation of road surfaces and applying thermoplastic reflective paint for marking of minimum 2 mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc., road marking of 150/100mm width using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate, inter filler, etc thermoplastic requirement for glass beads shall be as per the table No 800.4 of most specification conforming to BS-6086 of most specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacture's instructions and as directed. |
| 6 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 7 | Supply and fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 8 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 10 | M&L for 75 mm thick PCC (1:4:8) type D2, (Using 40 mm graded stone agg) as in sub base of floor/ hardstanding/ footpath etc complete all as specified and directed. |
| 11 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 12 | M&L rubber moulded factory made Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. Note- Design/Shade of rubber moulded machine pressed precast concrete interlocking paver block shall be as approved by GE |
| 13 | M&L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregates, as in roof kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender