Tender For special Repair Of Bldg No Lsm - 83, Jcos Md Accn At B C Of 101 Area Provost Unit, Shillong Cantt And special Repair To Floor Of Or Md Accn Qtr No P-141/1 To 141/9, P-142/1 To 142/6, P-176/3 To 176/6, P-178/1 To 178/3 & P-178/5 To 178/6 At
Tender Value
48.46 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
11 days left
EMD
96920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No Lsm - 83, Jcos Md Accn At B C Of 101 Area Provost Unit, Shillong Cantt And special Repair To Floor Of Or Md Accn Qtr No P-141/1 To 141/9, P-142/1 To 142/6, P-176/3 To 176/6, P-178/1 To 178/3 & P-178/5 To 178/6 At B C Of 101 Provost Unit, Shillong Cantt Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 2 | Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed. |
| 3 | Taking down shutters of any description nexc 1.0 Sqm reach complete all as specified and directed. |
| 4 | Taking down shutters of any description n.exc 1.0 Sqm each refixing in same opening complete all as specified and directed. |
| 5 | Taking down shutters of any description exc 1.0 Sqm and n.exc. 2sqm each complete all as specified and directed. |
| 6 | Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and directed. |
| 7 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed. |
| 8 | Dismantling unframed wooden work in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 9 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 10 | Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 11 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital, similar pattern as in roof coverings. complete all as specified and directed. |
| 12 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed. |
| 14 | Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed. |
| 15 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 16 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 17 | M&L for RCC nominal mix 1:2:4 type B-1 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.Note :- Weight of binding wire shall not be considered for measurement and payment purpose. |
| 19 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed. |
| 20 | M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed. |
| 21 | M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads , sectional area exc. 13 and n.exc. 25 sqcm complete all as specified and directed. |
| 22 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as specified and directed. |
| 23 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 24 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed. |
| 25 | S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and directed. |
| 26 | S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed |
| 27 | S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 28 | S&F 18/19 mm thick block boards fixed with screws to timber frame complete all as specified and as directed |
| 29 | S&F 12 mm thick block boards fixed with screws to timber frame complete all as specified and as directed |
| 30 | S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 31 | S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed. |
| 32 | S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed. |
| 33 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and directed. |
| 34 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 100 mm long complete all as specified and directed. |
| 35 | S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and directed. |
| 36 | S&F extruded aluminium alloy handles fabricated type anodised of size 125 mm complete all as specified and directed. |
| 37 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting complete all as specified and directed. |
| 38 | S&F 30mm width of flaps (When open in mm) continuous (piano) hinges, mild steel , bright finish or electro galvanised complete all as specified and directed. |
| 39 | S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 40 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 41 | S&F powder coated (powder coating min 50 micron) anodised two or three track sliding type window and ventilator shutters or side hung / without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 42 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed. |
| 43 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 44 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed. |
| 45 | M&L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed. |
| 46 | M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed. |
| 47 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, complete all as specified and directed. |
| 48 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 49 | M&L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 50 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed |
| 51 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed. |
| 52 | M&L for non skid ceremic white tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 53 | All as per Item No 51 above here–in–before but on vertical surfaces such as skirtings and risers to steps etc. over 10mm thick rendering in CM 1:4 as in backing coat complete all as specified and directed. |
| 54 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 55 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 56 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land complete all as specified and directed. |
| 57 | M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 58 | M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smooth complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 59 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 60 | S&F bevelled edge looking mirror of selected quality glass, mounted on chromium plated brass holder's and screws or commercia plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 61 | S&F for 20 mm dia harrison rails, stainless steel chromiun plated with fixing brackets stops , rollers etc complete all as specified and directed. |
| 62 | S&F for 20 mm dia brass chromium plated brackets and lattoo complete all as specified and directed. |
| 63 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 64 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 65 | S&F Bib taps, cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 66 | S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed. |
| 67 | S&F shower rose cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed |
| 68 | S&F 15 mm bore brass CP basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and as directed |
| 69 | S&F vitreous china wash down water closet pan (Pedestal Pattern) with P or S Trap white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed |
| 70 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 71 | S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 72 | S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed. |
| 73 | S&F in repairs corner glass shelf with bracket complete all as specified and as directed. |
| 74 | S&F in repairs CP over head shower square shape of size 150x150mm with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange complete all as specified and directed. |
| 75 | S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhead shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) complete all as specified and directed. |
| 76 | S&F 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and as directed |
| 77 | M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 78 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 79 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 80 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 81 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 82 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed. |
| 83 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 84 | Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity , complete all as specified |
| 85 | Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed complete all as specified and directed. |
| 86 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed. |
| 87 | S&F sinks made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cementmortar on to dwarf wall or includingfixing cantilever bracketsand connecting union to pipe, overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm complete all as specified and directed. |
| 88 | S&F Stainless steel kitchen plate rack of size 31\\" X 30' X 10\\" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed. |
| 89 | S&F brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 90 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and directed. |
| 91 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and directed. |
| 92 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 93 | All as per Item above here–in–before, but for 20mm dia (Bore) complete all as specified and directed. |
| 94 | S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed |
| 95 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 96 | M&L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 97 | M&L for vitrified ceramic tiles dark shed (exterior grade), 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed. |
| 98 | M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 99 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 100 | Complete removal existing treatment and applying 1mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coats of Oil Bound Distemper on wall and ceiling of approved shade/tint complete all as specified and as directed. |
| 101 | M&L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and directed. |
| 102 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 103 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 104 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and as directed. |
| 105 | M&L for preparation of new plastered/concrete surfaces of walls and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and as directed. |
| 106 | M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 107 | Complete removal of existing treatment and applying wall care putty where required to fill up holes to achieve smooth surfaces of wall / ceiling and applying two coats of Oil Bound Distemper with roller of approved shade/tint complete all as specified and as directed. |
| 108 | M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 109 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed. |
| 110 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm dia concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch complete all as specified and directed. |
| 111 | Description all as per Srl item No. 2 here in before but for one bell point controled by one bell push complete all as specified and directed. |
| 112 | Description all as per Srl item No.2 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 113 | Description all as per Srl item No.2 here in before but for one light point controlled by two way switch complete all as specified and directed. |
| 114 | Description all as per Srl item No.2 here in before but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 115 | Description all as per serial item No 2 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 116 | Supply and fixing piano switch 2 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 117 | Supply and fixing Bell push, flush type, 5 amp 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 118 | Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed. |
| 119 | Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only) |
| 120 | Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed. |
| 121 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 122 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked complete all as specified and directed. |
| 123 | Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed. |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and directed. |
| 126 | Supply and fix ininverter LED bulb 12 Watt B22 base Color complete including taking down old unserviceable one complete all as specified and directed. |
| 127 | S&F wall bracket decorative LED light fitting 10 watt Aluminium housing complete with necessary connection including taking down old unserviceable one complete all as specified and directed. |
| 128 | S&F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 129 | S&F Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making all electric connection complete all as specified and directed. |
| 130 | Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed. |
| 131 | S&F in repair GI Bracket of dia 40 mm light grade with 1.2 mtr length including fixing the fitting removed for changing the bracket and connection with existing wire etc complete all as specified and directed. |
| 132 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation complete all as specified and directed. |
| 133 | S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia complete all as specified and directed. |
| 134 | Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 135 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable complete all as specified and directed. |
| 136 | Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 137 | Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one complete all as specified and directed. |
| 138 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and directed. |
| 139 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed. |
| 140 | M&L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed. |
| 141 | Taking down existing energy meter and refixing the same after completion on the original location all work complete all as specified and directed. |
| 142 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and directed. |
| 143 | Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core, confirming to IS specifications complete all as specified and directed. |
| 144 | Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and directed |
| 145 | Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and directed |
| 146 | Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and directed |
| 147 | M&L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and directed. |
| 148 | Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender