Tender For Repairs To Flooring, Plinth Protection, Brick Work, Plastering, Replacement Of Pvc Water Tank, Pipe Line, Sanitary Fittings Water Proofing , Antitermite Treatment With Connected Items At Af Stn Suryalanka
Tender Value
45 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
21 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guntur → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Flooring, Plinth Protection, Brick Work, Plastering, Replacement Of Pvc Water Tank, Pipe Line, Sanitary Fittings Water Proofing , Antitermite Treatment With Connected Items At Af Stn Suryalanka
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris of the premises complete all as specified and as directed. |
| 2 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar 1:6 etc complete all as specified and as directed. |
| 3 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar 1:6 etc complete all as specified and as directed. |
| 4 | All as item No 03 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and as directed. |
| 5 | M&L for glazed ceramic coloured tiles 300mm x 450mm X 7mm , on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and as directed. |
| 6 | Dismantling of old water tank exc 250 Litre & n.exc 500 Litre capacity and removing to store etc. complete all as specified and as directed. |
| 7 | Dismantling of old water tank exc 500 Litre & n.exc 1000 Litre capacity incl all accessories complete all as specified and as directed. |
| 8 | S&F Rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed. |
| 9 | S&F Rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule and fixed etc. complete all as specified and as directed. |
| 10 | Cutting chases for concealed water tubing or concealed conduit wiring, etc. cutting not exc 10 cm girth and making good in cement mortar 1:3. complete all as specified and as directed. |
| 11 | Taking up or down 15mm bore steel/CPVC/PPR tubing and connections, complete all as specified and as directed. |
| 12 | Taking up or down 20mm bore steel/CPVC/PPR tubing and connections, complete all as specified and as directed. |
| 13 | Taking up or down 25 to 32mm bore steel/CPVC/PPR tubing and connections, complete all as specified and as directed. |
| 14 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 15 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 16 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 17 | S&F for 16mm bore 3-layers PPR polypropylene random copolymer concealed pipes SDR 7.40 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. |
| 18 | S&F for 20mm bore 3-layers PPR polypropylene random copolymer concealed pipes SDR 7.40 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. |
| 19 | S&F in repairs bib taps, cast copper alloy CP fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and as directed. |
| 20 | S&F in repairs 15mm dia stop valve cast copper alloy CP fancy type with long shank and cup (concealed type) complete all as specified and as directed. |
| 21 | S&F in repairs stop valve/angle cock 15 mm dia, chromium plated fancy type, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed, complete all as specified and as directed. |
| 22 | S&F in repairs 2-way angle cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and as directed.Make:- Prayag Cat part No 7711 or equivalent model of other approved manufacturer. |
| 23 | S&F in repair health faucet of 15 mm bore brass chromium plated including PVC pipe for connection to GI tubing 15 mm bore complete all as specified and directed. Make: Prayag cat no BEA-40 or equivalent model of other approved manufacturer. |
| 24 | S&F in repairs 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed. |
| 25 | S&F in repair 15 mm bore pillar taps cast copper alloy CP ,fancy type with capstan head screwed down high pressure with or without lettered hot or cold heavy duty with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 26 | S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head, complete all as specified and as directed.Make:- Jaquar cat part No FUS-29281 or equivalent model of other approved manufacturer. |
| 27 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and as directed. Make:- Prayag cat No 7814 or equivalent model of other approved manufacturer. |
| 28 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7816 or equivalent model of other approved manufacturer. |
| 29 | Supply and fix in repair pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and as directed.Make:- Prayag Cat part No 8750 or equivalent model of other approved manufacturer. |
| 30 | S&F in repair brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union 125 mm size complete all as specified and as directed. |
| 31 | S&F in repairs Urinal spreader of brass chromium plated for fixing with 15mm dia pipe complete all as specified and as directed. |
| 32 | S&F in repair 15mm bore PVC connections with PTMT nuts both end 450 mm long complete all as specified and as directed. |
| 33 | S&F PVC connections both end PTMT union and length 600 mm long for 15mm bore pipe as fixed in repairs complete all as specified and as directed. |
| 34 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated screws and wooden/plastic cleats complete all as specified and as directed. |
| 35 | S&F in repairs towel rack complete all as specified and as directed.Make:- Essco by Jaquar (Cat No: AEC-1181A) or equivalent model of other approved manufacturer. |
| 36 | S&F in repair CP towel ring fixed with and including chromium plated screws and plastic cleats complete all as specified and as directed. |
| 37 | S&F in repair Bevelled edge mirror of selected quality of size 600 mm x450 mm mounted on 6 mm thick AC building board of or 6 mm thick commercial ply wood fixed to wooden plug with chromium plated brass screw and cup- washers complete all as specified and as directed. |
| 38 | S&F in repairs 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flanged ends bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 39 | S&F 32mm dia PVC waste pipe fixed in repairs complete all as specified and as directed. |
| 40 | S&F 40mm dia PVC waste pipe fixed in repairs complete all as specified and as directed. |
| 41 | S&F in repairs low level flushing cistern PVC valveless, syphonic action type 10 ltrs capacity, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 42 | S&F in repairs 550x400 mm size vitreous china wash hand basin, white with flat back excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. |
| 43 | S&F in repairs Wash Basin oval type (56x41cm) complete all as specified and as directed. |
| 44 | S&F in repairs Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including provision of lime concrete bedding complete all as specified and as directed. |
| 45 | S&F Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete.Note:- Taking down WC, demolition of concrete and making good floor shall measured and paid separately under relevant items. |
| 46 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and including seat cover for pedestal pattern complete fixed complete all as specified and as directed. |
| 47 | S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and including seat cover for pedestal pattern complete all as specified and as directed.Note:- Taking down WC, demolition of concrete and making good floor shall measured and paid separately under relevant items. |
| 48 | S&F in repair Vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, connections to flushing pipe complete all as specified and as directed. |
| 49 | S&F in repairs 75mm dia PVC(SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 50 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specified and as directed. |
| 51 | S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed. |
| 52 | S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 53 | S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 54 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 55 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 56 | S&F in repair 110mm bore PVC (SWR) Vent cowl complete all as specified and as directed. |
| 57 | S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 58 | Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and as directed.Note: The demolition concrete at sunken floor of Bath/Toilet shall include the cost of demolition of existing WC. |
| 59 | M&L for filling sunken portion of WC/Bath with lean concrete PCC 1:5:10 using 40mm graded stone and finishing the surfaces rough to receive sub base complete all as specified and as directed. |
| 60 | M&L for 25mm thick plain cement concrete sub base 1:2:4 type B0 (12.5mm graded stone aggregate) with water proofing compound @3% by weight of cement for laying floor tiles complete all as specified and as directed. Note: WPC will be measured and paid separately. |
| 61 | M&L for 15mm thick plaster for sunken portion in CM 1:3 mixed with water proofing compound @2% by weight of cement, plaster surface should be even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately |
| 62 | Supply only of integral water proofing compound of approved make complete all as specified and as directed. |
| 63 | M&L for applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, applying SmartCare Damp Block 2K Supremo in two coat 2 kg/sqm consumption, the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc complete all as specified and as directed.Make:- SmartCare Damp Block 2K Supremo or any equivalent product of other approved manufacturer. |
| 64 | M&L for Preparing surface of sunken slab of kitchen and bath floor trap area and applying a two-component acrylic polymer-modifyed elastomeric waterproofing membrane. complete all as specified and as directed.Procedure:-(i) Dismantling of tiles and removal of old floor trap and replacing with new floor trap/nahani trap(ii) Application acrylic polymer in and around the floor area and finishing the surface by fixing tiles matching to existing shade.Make: Brushbond of Fosrocor any equivalent product of other approved manufacturer. |
| 65 | M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in flooring (below floor tiles) complete all as specified and as directed. |
| 66 | M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 67 | M&L for post construction anti termite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 68 | M&L for post construction anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 69 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 70 | M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 71 | Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 72 | M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement complete all as specified and as directed. |
| 73 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed. |
| 74 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and even mixed with and including WPC as per manufacturer's instructions complete all as specified and as directed. Note : Supply of water proofing compound shall be measured and paid separately. |
| 75 | M&L for preparation of newly plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 76 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 77 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 78 | Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting complete all as specified and as directed. |
| 79 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 80 | Disconnecting existing PVC water tanks of capacity 1000 Ltrs to 2000 Ltrs, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting and re-fixing in position (cleaning, repairing etc measured separately). complete all as specified and as directed. |
| 81 | Disconnecting existing PVC water tanks of capacity 500 Ltrs to 1000 Ltrs, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting and re-fixing in position (cleaning, repairing etc measured separately). complete all as specified and as directed. |
| 82 | Disconnecting existing PVC water tanks of capacity 250 Ltrs to 500 Ltrs, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting and re-fixing in position (cleaning, repairing etc measured separately). complete all as specified and as directed.Note for item No.80, 81 & 82 :- (a) Before commencement of roof treatment water tank shall be taken down and shall keep in safe custody of contractor. (b)The tank shall be refixed after completion of treatment. The contractor shall be responsible for the safe custory of the water tank after dismantling till refixing. |
| 83 | Taking down and removing of existing water proofing treatment of any description completely, incl removal of copper strip and refixing after treatment in position ,taking down of old cement plaster if any or roughening of surfaces and cleaning the top surface of RCC slab with using wire brushes and water to remove all dust and loose particles etc. complete all as specified and as directed. |
| 84 | M&L for rendering 10mm thick in cement mortar 1:3 on roof/ concrete surfaces with using water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and as directed. Note: Supply only of water proofing compound/admixture shall be measured and paid separately. |
| 85 | M&L for water proofing treatment with 4mm thick APP modified membrane weighing not less than 4Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 Gram/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sqm, tearing strength of 180 N, laid after applying a coat of Bitumen Emulsion, Primer @ 0.20Kg/Sqm over the thoroughly cleaned surfaces to be water proofed. Membrane shall then be laid with 10cm side overlaps and 15cm end laps completely thermo fused by flame torch application as per manufacturer's instructions. Care shall be taken to avoid wrinkles while sticking the membrane on the bitumen surface. A coat of hot blown bitumen 90/15 shall be applied on top of the membrane @ 1.20 Kg/Sqm and finally finished with solar reflective aluminium paint @ 0.10 Kg/Sqm. The water proofing membrane shall be extended upto a height of minimum 30 cm on wall and inserted by cutting groove and filling with bitumen complete all as specified and as directed. |
| 86 | M&L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 87 | Taking down chowkats or frames (without taking off shutters from frame ) n.exc 1.5 sqm each. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed. |
| 88 | Taking down chowkats or frames (without taking off shutters from frame ) exc 1.5 sqm but n.exc 4 Sqm each. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed. |
| 89 | Taking down Shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed. |
| 90 | Taking down Shutters of any description exc 2.0 sqm each complete all as specified and as directed. |
| 91 | S&F for second class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid ,rounded or chamfered put together with glue pinned joints complete all as specified and as directed. |
| 92 | M&L for pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 93 | M&L for pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 94 | S&F 35 mm thick second class hard wood plain, framed, panelled shutters ( any number of panels), with panels of timber flat on both sides or of veneered particle board ,medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and as directed. |
| 95 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 96 | S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed. |
| 97 | S&F 25 mm thick Flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides as in cupboard shutters complete all as specified and as directed. |
| 98 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and as directed. |
| 99 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 100 | S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing least, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No), hinges type B-21 100mm long (2Nos), suitable handle (1 no) complete all as specified and as directed. |
| 101 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 102 | M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminium doors / partitions complete all as specified and as directed. |
| 103 | S&F 5.5 mm thick Sheet Glass, ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane for aluminium doors / partitions complete all as specified and as directed. |
| 104 | S&F 4 mm thick Sheet Glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane for aluminium windows complete all as specified and as directed. |
| 105 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 106 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads complete all as specified and as directed. |
| 107 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads complete all as specified and as directed. |
| 108 | M&L Mild steel work such as bands, straps, clamps and hold fasts etc. of Fe-290 Gde E-165 complete all as specified and as directed. |
| 109 | S&F factory made PVC Solid Door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawings shown in SSR Part II 2020. |
| 110 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing shown in SSR Part II 2020. |
| 111 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (styles) with 2, 4, or 6 raised panel design with 2mm thick Moulded prelaminated PVC Sheet on the front face & 2mm prelaminated PVC Sheet on back face, With Particle Board Core as per specification & drawing shown in SSR Part II 2020. |
| 112 | S&F 125 mm size Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type B-21 complete all as specified and as directed. |
| 113 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed in repairs complete all as specified and as directed. |
| 114 | S&F 150 mm long Aluminium alloy handles cast type anodised complete all as specified and as directed. |
| 115 | S&F 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and as directed. |
| 116 | S&F 75 mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed in repairs all as specified and as directed. |
| 117 | S&F 100 mm long Aluminium alloy handles cast type anodised all as specified and as directed. |
| 118 | S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of overall length of cover plate 150mm complete all as specified and as directed. |
| 119 | S&F 300mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed. |
| 120 | S&F Mild steel 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 121 | Providing and fixing in repair factory made uPVC white colour casement (Openable) window area exc 1.00 sqm but n.exc 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 122 | S&F in repair for Aluminium (extruded section body) Door closer hydraulically regulated, designation No.2 universal type, suitable for door shutter of 701 to 850mm in width and weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 123 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 124 | S&F in repair 125 mm size Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type B-21 complete all as specified and as directed. |
| 125 | S&F in repair 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and as directed. |
| 126 | S&F 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and as directed. |
| 127 | S&F in repair 100 mm long Aluminium alloy handles cast type anodised fixed in repairs all as specified and directed. |
| 128 | S&F in repair 150 mm long Aluminium alloy handles cast type anodised fixed in repairs all as specified and directed. |
| 129 | S&F in repair 300mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed in repairs all as specified and directed. |
| 130 | S&F in repair for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of overall length of cover plate 150mm fixed in repairs complete all as specified and as directed. |
| 131 | S&F in repair brass 4 levers Mortise lock, vertical type of size 100 mm in repairs complete all as specified and as directed. |
| 132 | S&F in repair Mild steel 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate fixed in repairs complete all as specified and as directed. |
| 133 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete etc. complete all as specified and as directed. |
| 134 | S&F 3 mm thick Sheet Glass, ordinary quality and glazing with oil putty or fitted with wooden beadings in windows and ventilators complete all as specified and as directed. |
| 135 | S&F 20mm dia curtain rails mild steel chromium plated fixed in repair with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 136 | M&L Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 137 | S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and as directed. |
| 138 | S&F in repair magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed. |
| 139 | Welding to existing steel door/gate, window in repairs n.exc 2.5 cm in length thickness of metal exc 6mm but n.exc 9mm complete all as specified and as directed. |
| 140 | Welding to existing steel window in repairs exc 2.5 cm in length but n.exc 5 cm in length thickness of metal exc 6mm but n.exc 9mm complete all as specified and as directed. |
| 141 | Re-securing or easing, refixing and adjusting including taking down doors (shutters/frames) of any description n.exc 1 sqm each complete all as specified and as directed. |
| 142 | Re-securing or easing, refixing and adjusting including taking down doors (shutters/frames) of any description exc 1 Sqm but n.exc 2 sqm each complete all as specified and as directed. |
| 143 | Re-securing or easing, refixing and adjusting including taking down aluminium doors (shutters/frames) of any size using hinges, beading, screws, rivets, L-clips and any other items required for repair excluding glass all as specified and as directed. Note : Glass will be measured and paid separately. |
| 144 | Re-securing or easing, refixing and adjusting including taking down aluminium window (shutters/frames) of any size using hinges, beading, screws, rivets, L-clips and any other items required to repair excluding glass sheet all as specified and as directed.Note : Glass sheet shall be measured and paid separately. |
| 145 | M&L for joint free matt finished ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and as directed. |
| 146 | M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 147 | All as per sl item No-146 above but on skirting over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 148 | M&L for Glazed ceramic coloured tiles 450x350x7 mm in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed in cement mortar in cement mortar 1:4 complete all as specified and as directed. |
| 149 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in flooring below floor tiles etc. complete all as specified and as directed. |
| 150 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and as directed. |
| 151 | M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete all as specified and as directed. |
| 152 | Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 incl taking down old one, complete all as specified and as directed. |
| 153 | S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed. |
| 154 | M&L Machine cut cudappah stone slab 20-25mm thick over 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 155 | Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 156 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc., fixed with L- type, J -type or cranked hook bolts complete all as specified and as directed. |
| 157 | M&L for 6 mm thick Asbestos cement, serrated ridge for corrugated or semi corrugated sheets fixed with L- type, J -type or cranked hook bolts complete all as specified and as directed. |
| 158 | M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as specified and as directed. |
| 159 | M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based Plain steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as specified and as directed. |
| 160 | Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and as directed. |
| 161 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240, Fe-410-W (Gde-E-250) quality A complete all as specified and as directed. |
| 162 | S&F steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc conforming to Fe-410-W (Gde-E-250) , quality A complete all as specified and as directed. |
| 163 | M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome powder on new surfaces in any tint complete all as specified and as directed. |
| 164 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall panelling including cover fillets, complete all as specified and as directed. |
| 165 | S&F PVC insulation panels 5 to 6mm thick plain PVC sheet suitably placed in false ceiling grid in multiple layers made of Aluminium/G.I./M.S. as per specification and drawing. |
| 166 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including Anodised aluminium snap grid frame work of grid size 605 x 605 mm for false ceiling fixed to wall/ceiling complete all as specified and as directed. |
| 167 | S&F PVC wall lining consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site with necessary L&T PVC beading on PVC/GI frame as per specifications and drawing, complete including GI frame complete all as specified and as directed. |
| 168 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 169 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 mixed with WPC as per manufacturer's instructions, surfaces finished fair and even complete all as specified and as directed.Note : Supply of water proofing compound shall be measured and paid separately. |
| 170 | M&L for Rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as required complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified.Note : Rate for form work if required to be incl in the rate quoted by the contractor. |
| 171 | M&L for preparation of newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and as directed. |
| 172 | M&L for 100 mm thick plain cement concrete , 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor/hardstanding, etc finished surface even and smooth without using extra cement, complete all as specified and as directed. |
| 173 | M&L Hard-core of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 174 | M&L for providing 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in plinth protection with mastic filling in joints, ramp etc, complete all as specified and as directed. |
| 175 | M&L Uprooting scrubs/plant/flora & fauna on wall girth n.exc 100mm from brick wall by cutting holes into masonry walls for digging out roots and dosing sulphuric/phenolic acid as per manufacturers instruction to deep rooted tree roots and making good the disturbed area with cement mortar in 1:3 using water proofing compound including necessary scaffolding upto a height of 16 metre complete all as specified and as directed. |
| 176 | M&L for Chipping of slab/columns/beams/chajjas/ parapet and removing loose mortar with chisel hammer without much impact concrete and cleaning the exposed reinforcement with wire brush and sand blasting the surface using river sand with minimum of 6 Kg pressure at the nozzle end by mechanical compressor and providing zinc rich primer at the rate of 5 Sqm/Litre with Shaliprime zn R to reinforcement as per manufacturers instructions and including all scaffolding, machinery, tools tackles and men, materials and clearing of debris complete all as specified and as directed.Make : Shaliprime zn R of STP or equivalent brand in Fosroc/Dr. Fixit. |
| 177 | M&L for providing shear connectors and anchoring by drilling 12mm dia holes upto depth of 100mm in concrete surfaces and fixing 10mm dia TMT bars L shaped anchor rods as shear connectors by using Lokfix chemical manufactured by Fosroc or equivalent in defective concrete area of the slab/column/lintel etc or any other structural members as per site requirement after cleaning the drilled hole by using water jet and after drying the clean with the blower to remove all loose & fine particles the polyester resin shall be prepared by thorough mixing of base & hardener by the help of spatula after preparing the mix the holes shall be filled to a minimum depth of 1/3rd of the hole with the prepared polyester resin and the reinforced bar shall be inserted to a full depth of hole and extra bar shall be bent into the concrete complete all as specified and as directed. |
| 178 | M&L for providing 80 Gsm Hard Chicken Mesh for Plaster - Fibre Mesh Roll fixing it to the existing reinforcement before plastering complete all as specified and as directed. |
| 179 | Supply only TMT deformed bars of 10mm dia and over cut to length ,bent to shape required and binding with MS wire (annealed) not less than 0.9mm complete all as specified and as directed. |
| 180 | M&L for application of polymer modified reinstatement mortar 20mm thick in places of repair works of RCC members slab soffit/chajjas/beam/column having a compressive strength of 40 Mpa. This item includes application of rust inhibiting primer and letting it dry for 24 hours before application of plaster. Complete all as specified and as directed.Make:- Rendroc S2 of M/s Fosroc or equivalent model of other approved manufacturer. |
| 181 | M&L for application of single component shrinkage controlled , polymer modified , fibre reinforced cementitious repair mortar average thick measured at site in a single layer having a compressive strength of M45 grade to columns/beams/slab/soffits & wherever it required in isolated areas of repair works to RCC members complete all as specified and as directed.Make:- Renderoc SP40 of Fosroc or equivalent model of other approved manufacturer. |
| 182 | Supply and application one coat of two component system epoxy based bonding agent Nitobond SBR of M/s Fosroc or techno commercially equivalent or make as approved by AGE to receive the Rendroc SP40 & Rendroc S2 complete all as specified and as directed. |
| 183 | S&F in repair stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays to wall or roof for 100mm bore pipe, complete all as specified and as directed. |
| 184 | S&F in repair Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe, complete all as specified and as directed. |
| 185 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specified and as directed. |
| 186 | S&F in repair PVC (SWR) branch piece single Y equal or unequal for 110 mm bore complete all as specified and as directed. |
| 187 | All as per item no. 186 but for 75 mm bore complete all as specified and as directed. |
| 188 | S&F in repair PVC (SWR) branch piece double Y equal or unequal for 110 mm dia bore complete all as specified and as directed. |
| 189 | All as per item no. 188 but for 75 mm bore complete all as specified and as directed. |
| 190 | S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified and directed |
| 191 | M&L for Grouting in Brick/RCC/ wall/floor/roof through PVC nipples at a spacing of 45 to 60 cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizer admixture like FOSROC (model CEBEX100) or PIDILITE (MODEL 207 PIDICRET 8AM) @ 225GMS/50kGS of cement to fill up all capillaries/voids/honeycombing, nozzles to be sealed with sealing with pressure of 2 to 4 kg/sqcm and continued till refusal. After instructions complete all as specified and directed.Note:- After ascertaining the location of leakage/seepage/dampness under relevant item shall be operated of the required location.Make:- FOSROC (model CEBEX100) or PIDILITE (MODEL 207 PIDICRET 8AM) or equivalent model of other approved manufacturer. |
| 192 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 193 | Material & Labour for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 194 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and as directed. |
| 195 | S&F in repair stainless steel kitchen plate rack of size 80cm x 55cm x 20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and as directed.Make : Nirali/Prayag or equivalent of approved make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender