Tender For Repair/Maint Of B/R Services In Pump Houses, Sewage Treatment Plant, Sub Station, Mrs And All Other E/M Installation Under Ge Ge(Mes) Pithoragarh
Tender Value
34 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
19 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of B/R Services In Pump Houses, Sewage Treatment Plant, Sub Station, Mrs And All Other E/M Installation Under Ge Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&L for applying one coat of white wash on plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered white washed/colour wasshed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified |
| 3 | All as per item No 1 above but on ceiling surfaces |
| 4 | M&L for applying one coat of oil bond distemper on old distempered surfaceses of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified |
| 5 | M&L for applying one coat of cement base paint of old plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered cement base paint wasshed surfaces of walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified |
| 6 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description or girth over 10cm width or girth all as specified |
| 7 | M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description over 10 cm width or girth all as specified. |
| 8 | M & L for preparation of old decorated surfaces of walls and applying one coat of exterior weather proof acrylic emulsion paint complete all as specified |
| 9 | Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. |
| 10 | M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of walls, concrete etc finished even and smooth without using extra cement in complete all as specified and directed. |
| 11 | M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of walls, concrete etc finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for applying two coat OBD on newly plastered wall with roller application over a coat of primer and one coats of wall care putty of 1-1.5mm thickness prepared and sanded manually. complete all as specified and directed. |
| 13 | Preparation of Newly plastered surfaces of walls by brooming down or steel wire brushing and applying two coat of cement base paint on walls including cornices etc complete all as specified and directed. |
| 14 | M&L for preparation of old painted steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying one coat of antisol roof paint (MB Green) complete all as specified and as directed. |
| 15 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity exc 250 Ltrs but not exc 500 Ltrs,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 16 | S&F in repair Ball valves 20mm bore high pressure of PTMT (minimum weight- 210 gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed complete all as directed. Make-Prayag |
| 17 | S&F for in repair PVC cover for water storage tank of capacity exc 250 Ltr but n.exc. 500 Ltr complete all as spd and directed. |
| 18 | S&F for in repair PVC cover for water storage tank of capacity exc 500 Ltr but n.exc. 1000 Ltr complete all as spd and directed. |
| 19 | Demolition of plain Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 20 | Demolition of cement concrete ( unreinforced ) above ground floors n. exc 15cm thickness i.e from RCC roof slabs/terrace. |
| 21 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement |
| 22 | Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. |
| 23 | M&L rendering or screed bed 5 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using cement. |
| 24 | Supply only integral water proofing compound. |
| 25 | M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm , including 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4 and incl taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc complete all as specified and as directed . |
| 26 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 27 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 complete all as specified and as directed |
| 28 | Supply and fixing 0.63 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed |
| 29 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specied. |
| 30 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specied. |
| 31 | M & L for old plastered surfaces by complete removal of existing treatment of wall and applying 1mm thick a layer of Birla /JK wall putty on wall surfaces including cornices etc to obtain smooth surfaces to achive cement base paint/oil bound distemper etc complete all as specified and directed. (Cement base paint/oil bound distemper etc paid separately under respective items) |
| 32 | M&L in repairs , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. |
| 33 | Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed. |
| 34 | Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 35 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store |
| 36 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 37 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 38 | S &F PVC (SWR) 75 mm dia vent cowl |
| 39 | S & F rotational moulded polyethylene water storage tanks 500 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed. |
| 40 | S & F rotational moulded polyethylene water storage tanks 1000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed. |
| 41 | S & F rotational moulded polyethylene water storage tanks 2000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed. |
| 42 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 43 | Supply & Fix 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete all as specified and directed. |
| 44 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 45 | Supply & Fix 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete all as specified and directed. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 47 | M&L 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggrigate as in floor /roof surface and finishing the surface even and smooth w/o using extra cement complete all as specified |
| 48 | M&L PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar complete all as specified and directed. |
| 49 | Supply only glass dividing strips 38mm wide and 3mm thick |
| 50 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection, hard standing 75mm thick finished even and smooth w/o using extra cement. |
| 51 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A' |
| 52 | S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match. |
| 53 | Ditto all as per item No 8 but on vertical surfaces over 10 mm thick rendring in CM 1:4 |
| 54 | S&F coloured Elevation tiles tiles in vertical surface of size exceeding 0.11sqm but nexc 0.18 sqm 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendring in CM 1:4 complete all as specified and as directed. |
| 55 | S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendring in CM 1:4 complete all as specified and as directed. |
| 56 | S&F non skid tiles, exterior grade, chequered/grooved pattern of size 300x300mm/ 400x400mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 57 | S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 10-12mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 58 | S&F coloured chequered tiles rubber moulded decorative designed cement concrete tiles 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor over and incl 15 mm thick screed bed with cm 1:6 |
| 59 | M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work |
| 60 | S & F in repairs vitreous china hand wash basin white exclusive quality size 550 x 400 mm including brackets, PVC waste pipe and waste coupling, fixing pillar tap including cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed. |
| 61 | S&F in repairs 15mm bore dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed. |
| 63 | S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed. |
| 64 | S&F in repairs vitreous china squatting pan \\"Orissa\\" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed. |
| 65 | S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern withflat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified. |
| 66 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed. |
| 67 | Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store. |
| 68 | -Ditto- but n.exc 1.5m2 each -ditto-. |
| 69 | Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and Ditto |
| 70 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specified and as directed. |
| 71 | S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, all as specified and as directed. |
| 72 | S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought framed rebated on solid round or chamfered put together with glue pinned at joints supplied and fixed. |
| 73 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 74 | S&F 30 mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat. |
| 75 | S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. |
| 76 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings. |
| 77 | S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised complete all as specified and as directed. |
| 78 | S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified |
| 79 | S& F 125 mm extruded aluminum alloy handles, fabricated type anodised. |
| 80 | S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 81 | S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified |
| 82 | S&F Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple. |
| 83 | S&F in repairs Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple. |
| 84 | S & F 20/25mm mm dia fancy type Drapery Rod with rubber sleeves including brackets complete, of approved quality and all as directed including taking down existing curtain rod complete all as specified & directed. |
| 85 | S&F in repairs 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m including Hacking out old broken glass (any thickness, size, quality or description) from steel frames or fixed with beads complete all as specified and directed. |
| 86 | All as above but 3mm thick sheet glass ground or Obscured or frosted on one side and ditto |
| 87 | M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified. |
| 88 | Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) complte all as specified and as directed. |
| 89 | M&L for Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 90 | Ditto all as per item No but on vertical surfaces over 10 mm thick rendring in CM 1:4 |
| 91 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to PVC frame plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 92 | Dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in stone slabs and tiles floors, aprons etc complete all as specified and directed |
| 93 | M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified and directed. |
| 94 | S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade all as specified and directed. |
| 95 | M & L for 40 mm thick PCC 1:3:6 type C-1 using 20mm gradd stone aggregate as in floors for levelling course on existing cleaned surface etc for laying paver blocks, chequered tiles etc finished rough to receive floor finishes complete all as specified and directed. |
| 96 | M & L for sand filling under floors or in foundation including watering and consolidation. |
| 97 | Dismantling posts or struts (wood, steel or R.C.C.) any section, in natural ground including taking out embedded portion and making good disturbed ground |
| 98 | Dismantling of fencing wire mesh any type |
| 99 | S&F MS Hand rails /Angle , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 100 | All as Item No 98 above but fixing only |
| 101 | M & L for Cement Concrete Type C-2, 1:3:6 (40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and as specified. |
| 102 | Supply only chain link MS galvanised fencing any size or type complete all as specified and directed |
| 103 | Fixing only chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 104 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck |
| 105 | M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165))) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips . |
| 106 | M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured) |
| 107 | S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . |
| 108 | M & L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description exc. 10 cm width or girth including preparation of new steel surfaces, complete all as specified and directed. |
| 109 | S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 110 | S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 111 | S&F in repair 15mm bore fancy type two way CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 112 | S&F in repairs 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed |
| 113 | Excavation in trenches ,n exc 1.5m wide and exc 1.5mtr but n.exc 3.00m in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and getting out in Hard/dense soil complete all as specified and directed. |
| 114 | Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil). |
| 115 | Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. |
| 116 | Demolition of concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 117 | M&L for MS TMT bars 10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. |
| 118 | M & L for providing precast cement concrete (reinforced)Type B1, 1 : 2 : 4 (20mm graded aggregate) set in cement mortar 1 : 6, in landings, for RCC cover slabs factory made for drains cover with plain faces complete all as specified and directed. |
| 119 | M&L RCC M-20 (Nominal Mix) as Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressescomplete all as specified and as directed. |
| 120 | M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings, slab, chajja and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as spd and directed |
| 121 | demolition for Brickwork or stone/ boulder masonry/ pcc block walling built in Cement Mortar complete all as specified and directed. |
| 122 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 and complete all as specified and directed. |
| 123 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 and complete all as specified and directed. |
| 124 | Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 125 | M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,(50 mm thick ) bed blocks including necessary form work and incl demolition complete all as specified and directed |
| 126 | M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed. |
| 127 | M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed. |
| 128 | Raking out joints/pointing built in cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses, washing the joints and removing rubbish off the premises complete. |
| 129 | S&F in repair 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length with rubber ring joints,as in weep holes complete all as specified and directed. |
| 130 | M & L for precast concrete Kerb Stones factory made as in repairs of type B1, 1 : 2 : 4 (20mm graded stone aggregate) 10 to 15 cm thick and and setting in CM 1 : 6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed. |
| 131 | M&L for preparation of new surface of kerb stones and applying two coat of exterior emulsion paint 1st quality with one coat of putty complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender