Tender For Repair/Maint Of Geyser, Apfc Panels, Lighting Arrestors And Earthing At Electrical Sub Station Outside Moat Area Under Ge (Fw) Kolkata
Tender Value
39.50 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
19 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Geyser, Apfc Panels, Lighting Arrestors And Earthing At Electrical Sub Station Outside Moat Area Under Ge (Fw) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Taking down geysers any type and capacity (25/50 ltrs) from the existing position in wall and removing to stores for repairs, cleaning and re-fixing the same in original/ other position after repairing including electric and water connection, testing etc complete all as directed by Engineer-in-Charge ( Note : Repairs of item shall be measured and paid separately under relevent item). |
| 2 | Supply and fixing in repair heating element tubular steel type element 1500/2000W (ISI Marked) suitable for 25ltrs capacity as per sample after removing the existing defective element complete all as directed by Engineer-in-Charge. |
| 3 | M&L servicing of geysers with suitable chemical with rust and sludge free wash, of tank, element and outer body of geyser including taking down and refixing the same/differenet position with tightining of connections complete all as specified and directed. |
| 4 | Supply and fixing in repair heating element tringle type 1500/2000W (ISI Marked) suitable for 25ltrs capacity as per sample after removing the existing defective element complete all as directed by Engineer-in-Charge. |
| 5 | Supply and fixing in repair thermostat switch ISI marked for geysers of 25-50 ltrscapcity of micro gap steam type thermostat SEA and make as per sample approved by Engineer-in-charge, including testing complete. |
| 6 | Supply and fixing in repair thermostat switch ISI marked for geysers of 25-50 ltrscapcity of micro gap steam type thermostat TSE and make as per sample approved by Engineer-in-charge, including testing complete. |
| 7 | Supply and fixing in repair thermal cut switch ISI marked for geysers of 25-50 ltrs capcity, make as per sample approved by Engineer-in-charge, including testing complete. |
| 8 | Supply and fixing in repair brass apprature plate complete with pluger pipe, bolts, nuts, and rubber ring complete and all connected components for 25 ltrs capacity geysers including testing complete all as per sample directed by Engineer-in-Charge. |
| 9 | Supply and fixing in repair split plate of 22 SWG MS sheet white stove enamelled suitable for bottom cover of 25 ltrs capacity geysers testing complete all as per sample specified and directed by Engineer-in-Charge. |
| 10 | Supply and fixing in repair high density polythene pipe heavy duty confirming to IS 3075, 15mm dia, 450 mm long, including brass coupling at each end (weighting not less than 40gms each) one end secured to inlet of geysers and other end to stop cock all complete with connection complete all as directed by Engineer-in-Charge. |
| 11 | Supply and fixing in repair high density polythene pipe heavy duty confirming to IS 3075, 15mm dia, 600 mm long, including brass coupling at each end (weighting not less than 40gms each) one end secured to inlet of geysers and other end to stop cock all complete with connection complete all as directed by Engineer-in-Charge. |
| 12 | Supply and fix in repair 20Amp Metal clad socket 3 pin (2P+E), complete all as directed Make : L&T cat No MPS220S or equivalent model of Havells |
| 13 | Supply and fixing of rubber/PVC gasket to ensure water tightness of 25/50 Ltr geyser suitable as per sample complete |
| 14 | Supply & Fixing in repairs Air release valve/dead weight Valve ISI mark suitable for 25 Ltr cap geyser specified and as direted by Engr-In-Charge. |
| 15 | Supply & Fixing in repairs Non return Valve brass of 15 mm bore after dismantling old unserviceable NRV of any size all as specified and as direted by Engr-In-Charge. |
| 16 | Supply and fixing glass wool (spl quality) at thermal insulation after removing the old glass wool in between the inner container and outer casing complete all as directed by Engineer-in-Charge. |
| 17 | Supply and fixing pilot lamps round noon indicator for suitable for 25 ltrs capacity geyser fitted on the unit including necessary electric connection, testing complete including taking out old defective indicator complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fixing for replacement of SS Flexible connecting pipe of size 15mm dia, 600mm long with brass coupling and union at both ends heavy duty suitable for fix on 15mm dia GI pipe with washer complete and all as directed at site after takingout unserviceable one complete all as directed by Engineer-in-Charge. |
| 19 | Scraping, cleaning/removing deposited scales, connecting cavities as required for copper vessel outside surface, MS outer shell with top and bottom cover both surface shall be painted with two coat of synthetic enamel paint on outer surface of shell, top and bottom cover shall be painted with two coats of synthetic enemalled paint over a coat of red oxide zinc chrome primer and one coat of of red oxide to copper vessel outer surfaces and inner surface of outer shall geyser of any size 25/50 ltrs capacity and numbering/marking with different paint complete all as directed by Engineer-in-Charge. |
| 20 | Repairing leak portion of inner tank of geyser of any type/capacity by mean of spot welding with slider/brass spot braising and testing complete (Nos of spot welding not exceeding 5) complete all as directed by Engineer-in-Charge. |
| 21 | Supply and fixing bolts and nuts and washer 15mm dia 75mm to 100mm long with cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) incluing taking out old fixing bolt(set of four) from walls complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F Mild steel clamp of flat iron of size (25X6mm ) made to shape 100mm long welded with outer casing of geyser to walls with bolts and nuts complete all as directed by Engineer-in-Charge. |
| 23 | S&F in repair copper inner tank for hard and soft water pressure upto 100PSI (7.00Kg/Cm2) and normal working pressure is 30 PSI(2.11Kg/Cm2) for 25ltrs (Make : Bajaj/Venus or equivalent as approved by Accepting officer ) after removing the existing defective tank complete all as directed by Engineer-in-Charge. |
| 24 | Supply and fixing in repair stainless steel inner tank for hard and soft water pressure upto 100PSI (7.00Kg/Cm2) and normal working pressure is 30 PSI(2.11Kg/Cm2) for 25ltrs (Make : Bajaj/Venus or equivalent as approved by Accepting officer ) after removing the existing defective tank complete all as directed by Engineer-in-Charge. |
| 25 | Supply and fixing in repair mild steel outer cover 22 SWG for 25 ltrs capacity any dia of geyser including bottom and top cover with MS clamp, outer ring and split pin including two coats of paint over one coat of red oxide primer including dismantling the unserviceable cover as per direction by the Engineer-in-Charge. |
| 26 | S&F in repair metal clad single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp,240 Volt,complete all as directed by Engineer-in-Charge |
| 27 | S&F insulated workshop type 3 core flexible wire of size 24/0.20 complete including taking down old flexible unserviceable wire complete all as directed by Engineer-in-Charge |
| 28 | Supply & fixing in repairs stop valves of 15mm size, cast copper alloy, screwed down, high pressure with crunch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete as direted by Engr-In-Charge. Make Jaquar |
| 29 | S&F in repair Switch and socket combination 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) complete all as specified and directed |
| 30 | S & F Chromium plated brass angular stop cock concealed with wall flange fixed to 15/20 mm bore of iron pipe as in repair etc complete all as specified and as directed. Make Jaquar |
| 31 | S&F in repair plug Top 3 pin 15/16 Amp AC 230 Volts complete all as specified and directed |
| 32 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. |
| 33 | Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping/ Conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- |
| 34 | (a) One light/fan point controlled by one,one way switch. |
| 35 | (b) One bell point controlled by one push button switch. |
| 36 | (c) One 3 Pin 5 Amps socket out let point on independent board. |
| 37 | (d) One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs. |
| 38 | All as per item above here-in-before but using 4.00 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed. |
| 39 | Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed/directed. |
| 40 | Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps all as specified/directed. |
| 41 | Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed. |
| 42 | Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed. |
| 43 | Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed. |
| 44 | Supply and fixing of bell electric, 240 Volts, single pole complete all as specified and directed. |
| 45 | Supply & fixing of ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 volts as specified/directed. |
| 46 | Supply and fixing of Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed. |
| 47 | Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed. |
| 48 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells/CG/SURYA |
| 49 | Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make Havells/CG/SURYA |
| 50 | Supply and fix in repair Energy efficient light fitting (LED ) Sleek type of capacity 36 W fitting 4FT with extruded Aluminium Hosuing Lamps,driver,connector etc incl hanging/Fixing arrangement with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting through suitable size flexible PVC pipe making good to wall for old fitting including taking down old fitting of complete all as specified and directed. Make Philips Model No 581951 36 W ( Philips Ultron edge 4 ft LED wall Light or equiv Model of Jaquar/Surya. |
| 51 | Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 52 | S & Fix in replacement Slim, compact, aluminum die cast edge lit panel. Recess mounted square fixture 12 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout 170x170 mm, height 23±1 mm all as specified and directed. Make: CG Cat No LSDEP-12-CDL |
| 53 | S&F in replacement Slim, compact, aluminum die cast edge lit panel. Recess mounted round fixture 15 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout ø 155mm, height 23±1 mm all as specified and directed. Make: CG Cat No LCDEP-15-CDL |
| 54 | S & Fix in replacement Slim, compact, aluminum die cast edge lit panel. surface mounted square fixture 12 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout 170x170 mm, height 23±1 mm all as specified and directed. |
| 55 | S&F in replacement Slim, compact, aluminum die cast edge lit panel. surface mounted round fixture 15 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout ø 155mm, height 23±1 mm all as specified and directed. |
| 56 | Supply and fixing in repair of modular type,1 module 6 Amps one way switch 240 Volt AC including taking down old unsv complete all as specifed/directed.Make: Honeywell MK cat part No W26401A.Note:- As per sample on site |
| 57 | Supply & fixing in repair of modular type,1 module 16 Amps one way switch 240 Volt AC including taking down old unsv complete all as specified / directed.Make: Honeywell MK cat part No W26411A.Note:- As per sample on site |
| 58 | Supply & fixing in repair of modular type, 2 module, 3 pin 6 Amps shuttered socket 240 Volt AC including taking down old unsv complete all as specified / directed. Make: Honeywell MK cat part No W26423.Note:- As per sample on site |
| 59 | Supply & fixing in repair of modular type, 2 module, 6/16 Amps combined socket 240 Volt AC including taking down old unsv complete all as specified / directed. Make: Honeywell MK cat part No W26424.Note:- As per sample on site |
| 60 | Supply & fixing in repair of modular type, 2 module, 100 W 4 step fan regulator 240 Volt AC including taking down old unsv complete all as specified / directed. Make: Honeywell MK cat part No W26472.Note:- As per sample on site |
| 61 | Supply and fixing in repair of modular metal flush box 3 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 62 | Supply and fixing in repair of modular metal flush box 6 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 63 | Supply and fixing in repair of modular metal flush box 8 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 64 | Supply and fixing in repair of modular front plate with cover 3 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 65 | Supply and fixing in repair of modular front plate with cover 6 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 66 | Supply and fixing in repair of modular front plate with cover 8 module suitable for fixing switches and sockets incl taking down old unsv and making smooth finish to disturbed surface complete all as specified and directed by Engr- In- Charge.Make As per site |
| 67 | Supply and fixing in repair of switch piano flush type 240 Volts 5 Amps, SP, one way,fix in repair including taking down old unsv complete all as specifed/directed. |
| 68 | Supply and fixing in repair of bell push piano flush type one way 240 Volts 5 Amps,fix in repair including taking down old unsv complete all as specified/directed. |
| 69 | Supply and fixing in repair of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) ,fix in repair including taking down old unsv complete all as specified/ directed. |
| 70 | Supply & fixing in repair of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered),fix in repair including taking down old unsv complete all as specified / directed. |
| 71 | Supply and fixing in repair of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), fix in repair including taking down old unsv complete all as specified/directed. |
| 72 | Supply & fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all as specified and directed. |
| 73 | Supply and fixing in repair of bell electric, 240 Volts, single pole,fix in repair including taking down old unsv complete all as specified and directed. |
| 74 | Supply and fixing in repair of Bulb holder angular PVC/Polycarbonate suitable for batten fittings,fix in repair including taking down old unsv complete all as specified/directed. |
| 75 | Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 76 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 77 | Material & labour for Sub main wiring with two runs of single core 10 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn IN EXISTING CONDUIT and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 10 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 78 | M&L for Opening & Disconnecting LT Cable Connections with carefully from Automatic Power Factor Panels of 30 KVAr to 40 KVAr capacity, checking of the panels installed at OUTSIDE FW and testing their operation and mechanical system including detection and replacement of the unserviceable parts/ accessories required at site to make the Power Factor Panel completely functional including cleaning/ servicing of complete unit and re-connection of the panel complete all as specified and directed. Note :- Provision of new spare parts as required shall be measured and paid separately.) |
| 79 | M&L in repairs of capacitor Heavy duty square(box) type, 5 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 80 | M&L in repairs of capacitor Heavy duty square(box) type, 10 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 81 | M&L in repairs of capacitor Heavy duty square(box) type, 15 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 82 | M&L in repairs of capacitor Heavy duty square(box) type, 20 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 83 | M&L in repairs of capacitor Heavy duty square(box) type, 25 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 84 | M&L in repairs of capacitor Heavy duty square(box) type, 30 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 85 | M&L in repairs of capacitor Heavy duty square(box) type, 50 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER |
| 86 | M&L in repairs of Contactor 20 Amp, 3 pole, 1NO+1NC, MO C, AC3, 415 Vols, 50 Hz confirm to IS/IEC 60947-4-1 including taking out old unserviceable, complete all as specified and as directed. MAKE : L&T/ SCHNEIDER/ SIEMENS |
| 87 | M&L in repairs of Contactor 25 Amp, 3 pole, 1NO+1NC, MO C, AC3, 415 Vols, 50 Hz confirm to IS/IEC 60947-4-1 including taking out old unserviceable, complete all as specified and as directed. MAKE : L&T/ SCHNEIDER/ SIEMENS |
| 88 | M&L in repairs of Contactor 30 Amp, 3 pole, 1NO+1NC, MO C, AC3, 415 Vols, 50 Hz confirm to IS/IEC 60947-4-1 including taking out old unserviceable, complete all as specified and as directed. MAKE : L&T/ SCHNEIDER/ SIEMENS |
| 89 | M&L in repairs of Contactor 40 Amp, 3 pole, 1NO+1NC, MO C, AC3, 415 Vols, 50 Hz confirm to IS/IEC 60947-4-1 including taking out old unserviceable, complete all as specified and as directed. MAKE : L&T/ SCHNEIDER/ SIEMENS |
| 90 | M&L in repairs of Automatic Power Factor Controller Relay type Voltage 230 Volt 8 Step with 3 Phase / 3 CTs, connecting Single Phase and Three Phase Capacitors, compensation of each Phase, Measures Power Factor with RS-485 including taking out old unserviceable, complete all as specified and as directed. MAKE : SCHNEIDER/ HPL/ L&T/ EPCOS |
| 91 | M&L in repairs of Automatic Power Factor Controller Relay type Voltage 230 Volt 12 Step with 3 Phase / 3 CTs, connecting Single Phase and Three Phase Capacitors, compensation of each Phase, Measures Power Factor with RS-485 including taking out old unserviceable, complete all as specified and as directed. MAKE : SCHNEIDER/ HPL/ L&T/ EPCOS |
| 92 | M&L in repairs of LED indicator lamp (R,Y,B,G) including taking down old Unserviceable indicator lamps complete all as specified and directed. |
| 93 | M&L in repairs of Standard Push Button for ON/OFF/TRIP as per existing at site including taking down old Unserviceable Push button complete all as specified and directed. |
| 94 | M&L in repairs of of MCB, TPN, 40 Amp, C - Curve 415 Volts, 50 Hz, including taking down old Unserviceable MCB, TPN Complete all as specified and directed. |
| 95 | M&L in repairs of of MCB, TPN, 63 Amp, C - Curve 415 Volts, 50 Hz, including taking down old Unserviceable MCB, TPN Complete all as specified and directed. |
| 96 | M&L in repairs of of MCB, SP, 6-32 Amp, C - Curve, 240 Volts, 50 Hz, including taking down old Unserviceable MCB Complete all as specified and directed. |
| 97 | M&L in repairs of of Selector Switch for operating of Ampere/Voltage including taking down old Unserviceable switch Complete all as specified and directed. |
| 98 | M&L in repairs LED Digital Voltmeter, class 0.5 accuracy, 3 Phase, 415 Volts, 50 Hz, flush mounting 96mm x 96mm including taking down old unserviceable voltmeter complete all as specified and directed. Make : L&T |
| 99 | M&L in repairs LED Digital Ammeter, class 0.5 accuracy, 3 Phase, 415 Volts, 50 Hz, flush mounting 96mm x 96mm including taking down old unserviceable voltmeter complete all as specified and directed. Make : L&T |
| 100 | S&F in repairs of MCCB 4 Pole, 415 V, 630 Amps with Microprocessor based release breaking capacity 50 KA, Ics=100% of Icu with copper spreader incl taking down existing MCCB complete all as specified and directed. |
| 101 | S&F in repairs of MCCB 4 Pole, 415 V, 400 Amps with Microprocessor based release breaking capacity 36 KA, Ics=100% of Icu with copper spreader incl taking down existing MCCB complete all as specified and directed |
| 102 | S&F in repairs of MCCB 4 Pole, 415 V, 250 Amps with adjustable type, breaking capacity 36 KA, Ics=100% of Icu with Copper spreader incl taking down existing MCCB complete all as specified and directed |
| 103 | S&F in repairs of MCCB 4 Pole, 415 V, 200 Amps with adjustable type, breaking capacity 36 KA, Ics=100% of Icu with Copper spreader incl taking down existing MCCB complete all as specified and directed |
| 104 | Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for laying of UG Cable/Pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed. |
| 105 | Excavation/Cutting Road/ Hardstanding in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth and getting out, complete all as specified and as directed. NOTE : Quoted Unit Rate shall deem to be included Materials and Labour required for repairing to damaged Road/ Hardstanding to match the existing Surfaces and Specifications. |
| 106 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in Soft/ Loose Soil, complete all as specified and as directed. |
| 107 | Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 108 | M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180Cm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured. |
| 109 | Supply & laying in Trenches Sub-class ‘B’ Bricks, kiln burnt, for Cable Protection, complete all as specified and as directed. |
| 110 | Laying in Trenches Bricks (Serviceable Bricks obtained from Item No. 9.00 here-in-after), for Cable Protection, complete all as specified and as directed. |
| 111 | Supply and lay pipe HPDE pipe of size 100 mm complete all as specified and directed by Engr-in-charge. |
| 112 | Taking out of interlocking paver block, any shape or size and Re-laying the same after laying of LT cable of any size and also removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed.NOTE : Sand, if required for connection of cushioning level will be measured and paid seperately. |
| 113 | Supply and Laying of Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with 6 mm top layer of coloured rubberised anti abrasive material complete all as specified and directed. |
| 114 | Taking down unserviceable LT cable for repair/ replacement etc (from cable duct/underground trench/pole), stacking properly (cable, pipe and bricks) complete all as directed by the Engr-in-Charge of the following cross - sections :- Note :- Necessary earth work to be measured and paid separately. |
| 115 | 300 Sqmm to 400 Sqmm, 3.5 Core |
| 116 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 6.6 KV (E), of size 300 Sqmm, 3.5 core complete all as specified and directed. |
| 117 | S&F in repairs of MCCB 4 Pole, 415 V, 160 Amps with adjustable type, breaking capacity 36 KA, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed |
| 118 | S&F in repairs of MCCB 4 Pole, 415 V, 100 Amps with adjustable type, breaking capacity 25 KA, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed |
| 119 | S&F in repairs of MCCB 4 Pole, 415 V, 63 Amps with adjustable type, breaking capacity 25 KA, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed |
| 120 | Isolating the device and checking of LT ACBs 630-800 Amps capacity and testing its operation and tripping devices and mechanical system and setting it right clearing/servicing complete unit and recharging complete in position for Air Circuit Breaker of Make- GE , L&T, Crompton Greaves, Legrand or Schneider. |
| 121 | Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 400 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 |
| 122 | Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 630 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 |
| 123 | M&L Taking out loose/displaced Serviceable Aluminium Strip/ Copper Strip/ GI Strip of any size and any description with Accessories and refixing the same with necessary Fixing Arrangement like Screws, Saddles, Nuts and Bolts, complete all as specified and as directed.NOTE : Cost of Screws, Saddles, Nuts and Bolts, etc. will deemed to be included in the Quoted Unit Rate. |
| 124 | Supply and fixing of porcelain insulator of size 50mm with fixing arrangements including taking down old unserviceable complete all as specified and directed. |
| 125 | M&L in repairs for aluminium Strip of size 25 x 3.00 mm fixed to wall or on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.including taking down old unserviceable strip complete all as specified and as directed by Engineer-in-Charge. |
| 126 | M&L in repairs for Galvanized Iron Strip of size 25 x 4.00 mm fixed to wall or on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.including taking down old unserviceable strip complete all as specified and as directed by Engineer-in-Charge. |
| 127 | M&L in repairs of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking down unserviceable Strip, complete all as specified and as directed. |
| 128 | Supply and fixing Air termination single pointed, aluminium rod 12mm dia and 300mm long fixed on Galvanised iron pipes with copper/aluminium/GI strip for earth conductivity to ground complete all as directed by Engineer-in-Charge. |
| 129 | Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender