Tender For Repair/Maint Of Pump Motor Set Centrifugal Pump Set Submersible Pump Set Including Cleaning & Periodical Services To Oh Tank And Under Ground Sump & Pump House Bldg At Af Stn Bhowali.
Tender Value
8.49 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
9 days left
EMD
16980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Pump Motor Set Centrifugal Pump Set Submersible Pump Set Including Cleaning & Periodical Services To Oh Tank And Under Ground Sump & Pump House Bldg At Af Stn Bhowali.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for lifting of existing centrifugal pump 9 stage, water lubricating type of capacity 15/20 HP from the pump house including disconnecting of motor, suction and discharge pipes and all accessories for repairing / overhauling of 20 HP Pump, dismantling of the motor, replacement of worn out spares, overhauling, servicing including necessary machining work viz turning, polishing and re-assembling of pump and motor on completion of repair work and re-fixing the repaired pump with pipes and all accessories including providing necessary electric connection and testing on completion all as specified and directed. (Note: All spare parts shall be measured and paid separately under respective item as ‘Supply only’) |
| 2 | Supply and fixing in replacement of following spare parts of Centrifugal pump set of capacity 15/20HP complete all as specified and directed:- |
| 3 | 20 HP centrifugal pump shaft Stainless steel with key |
| 4 | Outer Sleeve Bronze |
| 5 | Inner Sleeve Bronze |
| 6 | MS Lock |
| 7 | CI Casing repairing |
| 8 | Rubber 'O' ring for casing |
| 9 | Rubber 'O' ring for Sleeve |
| 10 | Bearing of same make as per existing pump e.g(6305) |
| 11 | Bearing of same make as per existing pump e.g(7307) |
| 12 | Impeller Bronze |
| 13 | Jointing material nut bolt, stud etc. |
| 14 | CI gland |
| 15 | M & L for rewinding of electrical motor of 15/20 HP capacity with super enamelled copper winding wire of suitable gauge and turn as per existing including insulating materials, heat varnishing and replacement of worn out spares and re-fixing in position with pump sets and testing complete all as specified and directed. (Note: All spare parts shall be measured and paid separately under respective item as ‘Supply only’) |
| 16 | S&F in replacing of ball bearing suitable for driving end for 20/15 HP motor. |
| 17 | S&F in replacing of ball bearing suitable for Non driving end for 20 HP motor |
| 18 | M&L for repairs to couplings (flanged or spider) to make the pump motor sets trouble free smooth running including replacement of nuts and bolts and rubber pieces etc complete all as specified and directed. |
| 19 | M & L for lifting of existing Submersible pump motor set along with column pipes of capacity 15/20 HP from the existing bore well / pump house including disconnecting of all electrical connections and all accessories for repairing / overhauling, dismantling of the motor, replacement of worn out spares, overhauling, servicing including necessary machining work viz. turning, polishing and re-assembling of pump and motor on completion of repair work and re-fixing the repaired pump with motor and all accessories including providing necessary electric connections and testing on completion of repair work complete all as specified and directed. NOTE: - All spare parts shall be measured and paid separately under respective items of this schedule as ‘Supply only’. |
| 20 | Supply and fixing of following spare parts of submersible pump set of capacity 15/20 HP complete all as specified and directed: - |
| 21 | Motor bearing bush upper and lower |
| 22 | Oil seal |
| 23 | Rotor Setup upper and lower |
| 24 | Thrust bearing plate |
| 25 | Thrust plate with forward lining |
| 26 | Rotar sleeves grinding and polishing balancing |
| 27 | T bolt upper |
| 28 | T bolt lower |
| 29 | Stage bowl support bush(Rubber) |
| 30 | Neck ring |
| 31 | Bearing sleeve/ support sleeve |
| 32 | Impeller Key(SS) |
| 33 | Nut stud set |
| 34 | Pump shaft polishing and key way repair stage |
| 35 | Impeller Repairing |
| 36 | stage Bowl Casing repairing Please Enable Macros to View BoQ information |
| 37 | stage Bowl Casing repairing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender