Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #56783334

Tender For Provision Of Power Supply To New Mri And Porta Cabins Of Pg Trainees At Inhs Asvini Under Age(I) Asvini, Colaba, Mumbai

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
20 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
9 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Power Supply To New Mri And Porta Cabins Of Pg Trainees At Inhs Asvini Under Age(I) Asvini, Colaba, Mumbai

BOQ

Name of Work:- PROVISION OF POWER SUPPLY TO NEW MRI AND PORTA CABINS OF PG TRAINEES AT INHS ASVINI UNDER AGE(I) ASVINI, COLABA, MUMBAI
Sl. No. Item Description
1Supplying ,laying , commissioning and testing , XLPE insulated, armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade of size 300 sq. mm, 3½ core, laid in trenches passing through pipes fixed on walls complete including connecting properly using copper, lugs,thimbles etc complete all as specified and directed.
2Supplying ,laying ,coomissioning and testing , XLPE insulated, armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade of size 400 sq. mm, 3½ core, laid in trenches, passing through pipes, fixed on walls complete including connecting properly using copper, lugs,thimbles etc complete all as specified and directed.
3Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for laying of cables,etc and getting out in any type of soil complete all as specified.Note- Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables.
4Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard and dense soil complete all as directed.
5Removing excavated materials from the site of work outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.
6M & L for dry clean river sand as cushioning of cable in trenches for cable protection including punning of sand in layers all as specified in SSR part I .Note: Thickness after punning down shall be measured and paid
7M&L for machine pressed precast concrete inter locking paver block any shape and size conforming to IS-15658-2006 of 100mm thickness M-50 Grade, laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rolling to vibrator complete all as specified.Note- The Paver blockes shall be laid for repairing road/footpath not less then 0.45mtr wide.
8Supply & laying factory made un-reinforced precast concrete cable cover class LV type 1, flat of size 250mm x 150mm x 40 mm complete all as specified & directed.
9M & L for cutting existing road, hard standing of 450mm wide and 450 depth(22 thick comprising bituminuos topping for laying pipes/cable and making good disturbed surfaces to match with existing surfaces and complete all as specified.
10M & L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) for road/hard standing cutting and finished top surface fair and even complete all as specified.
11S&F in repairs 100 mm bore high density polyethylene pipe (HDPE) of pressure rating 6 Kgf/Sqcm laid in trenches or above ground surfaces for passing cable or fixed on wall/pole etc for road passing cable complete all as specified.
12Supply, install, commission and testing LT panel board of size not less than 1000mmx500mmx500mm factory fabricated, CPRI approved, wall mounted, dust and vermin proof, front openable door with locking arrangment made out 2mm thick stain-less steel sheet (ss 316 grade), well ventilated cubical type with individual compartments for enclosures with necessory arrangment for top entry for incoming and outgoing cables suitable for operation on 3 phase 50 Hz,415 Volts, IP 42 protection, internal wiring with PVC insulated copper conductor FRLS cable 10 Sqmm including suitable size copper lugs and copper bus bar of required size for phase and neutral including comprising the following-:(a) MCCB TPN 400 Amps, 'C' series 35KA AC 415 volts - 01 Nos.(b) Digital volt meter 0-500 Voltss- 1 No(c) Digital Ammeter with CT 0-600 Amps - 01 No(d) Phase Indicator LED (RYB) (set of three) - 01 Set
13M & L for earthing complete with G .l earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with galvanised earth strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50m, including earth pit in PCC (1 : 3 : 6) type C1 (using 20 mm graded stone aggregate) with 40mm thick precast RCC cover in 1:2:4 type B1 reinforced with 8mm dia TMT bars @ 100mmc/c on both sides with handle , watering arrangement with funnel internally secured with wire mesh, 20 mm bore medium grade GI pipe for watering, 20 mm bore light grade Gl pipe for lead protection including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point including dismantling/ demolition of existing earthing and removing debries out side MD land all as specified and indicated including testing on completion as directed by Engineer-in-Charge.
14M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32X6mm galvanised iron strip all as specified and directed by EIC.
15Supplying and making straight through joint with hheat shrinkabnle kit including ferrules and other jointing materials for following size of PVC insulated and PVC/SLPE aluminium conductor of 1.1KV grade suitable for UG cable 3.5core x400 Sqmm complete all as sperified in directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56783334
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 20 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Power Supply To New Mri And Porta Cabins Of Pg Trainees At Inhs Asvini Under Age(I) Asvini, Colaba, Mumbai
Basic Detail
Tender No 8032/CWE(NW)MUMBAI/E8
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 31 Jul 2026
Submission Date 27 Aug 2026
Open Date 28 Aug 2026
Finance
Tender Value 20 Lakhs
Tender Fee 500
EMD 40000
Exemption Available
Document List
41264290-2616-488b-a1f6-b8d72aa2d79d.html
8032f.rar
BOQ_875864.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Aug 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

41264290-2616-488b-a1f6-b8d72aa2d79d.html

rar

8032f.rar

xls

BOQ_875864.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders